Preliminary mission profile of Hera’s Milani CubeSat

CubeSats offer a flexible and low-cost option to increase the scientific and technological return of small-body exploration missions. ESA’s Hera mission, the European component of the Asteroid Impact and Deflection Assessment (AIDA) international collaboration, plans on deploying two CubeSats in the proximity of binary system 65803 Didymos, after arrival in 2027. In this work, we discuss the feasibility and preliminary mission profile of Hera’s Milani CubeSat. The CubeSat mission is designed to achieve both scientific and technological objectives. We identify the design challenges and discuss design criteria to find suitable solutions in terms of mission analysis, operational trajectories, and Guidance, Navigation, & Control (GNC) design. We present initial trajectories and GNC baseline, as a result of trade-off analyses. We assess the feasibility of the Milani CubeSat mission and provide a preliminary solution to cover the operational mission profile of Milani in the close-proximity of Didymos system.     

月球立方星姿态控制系统的初步设计与测试

立方星是一种模块化的微小卫星,在科学探测与专业人才培养等方面具有重要意义。针对目前立方星任务逐渐从近地轨道向深空扩展的发展趋势,以立方星月球深空任务为背景,利用商业器件设计并实现了初步的立方星姿态控制系统,以及姿态控制系统所必需的结构、电源、计算机等立方星子系统,同时给出了姿态测试平台的设计方案及其硬件实现。在所搭建硬件平台上,通过测量飞轮控制器的阻尼系数,对控制模型进行参数辨识与标定,获得了与数值仿真一致的实物测试结果。针对姿态控制系统设计了PD控制律,并在控制实验中实现了至任意姿态角的机动控制。     

Science Missions Using CubeSats

As the role of missions and experiments carried out in outer space becomes more and more essential in our understanding of many earthly problems, such as resource management, environmental problems, and disaster management, as well as space science questions, thanks to their lower cost and faster development process CubeSats can benefit humanity and therefore, young scientists and engineers have been motivated to research and develop new CubeSat missions. Not very long after their inception, CubeSats have evolved to become accepted platforms for scientific and commercial applications. The last couple of years showed that they are a feasible tool for conducting scientific experiments, not only in the Earth orbit but also in the interplanetary space. For many countries, a CubeSat mission could prompt the community and young teams around the world to build the national capacity to launch and operate national space missions. This paper presents an overview of the key scientific and engineering gateways opened up to the younger scientific community by the advent and adaptation of new technology into CubeSat missions. The role of cooperation and the opportunities for capacity-building and education are also explored. Thus, the present article also aims to provide useful recommendations to scientists, early-career researchers, engineers, students, and anyone who intends to explore the potential and opportunities offered by CubeSats and CubeSats-based missions.      

Deorbiter CubeSat mission design

This paper presents the mission design for a CubeSat-based active debris removal approach intended for transferring sizable debris objects from low-Earth orbit to a deorbit altitude of 100 km. The mission consists of a mothership spacecraft that carries and deploys several debris-removing nanosatellites, called Deorbiter CubeSats. Each Deorbiter is designed based on the utilization of an eight-unit CubeSat form factor and commercially-available components with significant flight heritage. The mothership spacecraft delivers Deorbiter CubeSats to the vicinity of a predetermined target debris, through performing a long-range rendezvous maneuver. Through a formation flying maneuver, the mothership then performs in-situ measurements of debris shape and orbital state. Upon release from the mothership, each Deorbiter CubeSat proceeds to performing a rendezvous and attachment maneuver with a debris object. Once attached to the debris, the CubeSat performs a detumbling maneuver, by which the residual angular momentum of the CubeSat-debris system is dumped using Deorbiter’s onboard reaction wheels. After stabilizing the attitude motion of the combined Deorbiter-debris system, the CubeSat proceeds to performing a deorbiting maneuver, i.e., reducing system’s altitude so much so that the bodies disintegrate and burn up due to atmospheric drag, typically at around 100 km above the Earth surface. The attitude and orbital maneuvers that are planned for the mission are described, both for the mothership and Deorbiter CubeSat. The performance of each spacecraft during their operations is investigated, using the actual performance specifications of the onboard components. The viability of the proposed debris removal approach is discussed in light of the results.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

面向立方星变轨任务的机动控制策略

为了实现立方星在轨飞行与变轨,基于模块化推进器系统提出混合控制策略实现微小卫星轨道持续变化任务需求。首先,针对多单元立方星单一主推进器的结构部署,基于高斯变分方程采用连续低推进力实现轨道机动变化。为了实现对立方星主推进器的指向调整,基于姿态动力学模型利用PD连续姿态控制求得所需扭矩,实现对立方星的指向角和指向角速度调节。针对配置的微脉冲等离子推进器(μ-PPT)不连续的特点,通过搜寻μ PPT最优脉冲序列组合获得实际扭矩,满足对外部干扰的持续补偿以及立方星的姿态稳定和指向调整操作需求。此外,引入姿态误差敏感度阈值,使姿态控制器在能够提高系统鲁棒性的同时减少μ-PPT消耗。最后,通过对3U立方星在轨飞行与变轨的具体案例分析,表明所提出的基于微推进器系统的混合控制策略能够实现立方星轨道机动变化需求。     

In-orbit operation and performance of the CubeSat Soft X-ray polarimeter PolarLight

PolarLight is a compact soft X-ray polarimeter onboard a CubeSat, which was launched into a low-Earth orbit on October 29, 2018. In March 2019, PolarLight started full operation, and since then, regular observations with the Crab nebula, Sco X-1, and background regions have been conducted. Here we report the operation, calibration, and performance of PolarLight in the orbit. Based on these, we discuss how one can run a low-cost, shared CubeSat for space astronomy, and how CubeSats can play a role in modern space astronomy for technical demonstration, science observations, and student training.     

Nanosatellite constellation deployment using on-board magnetic torquer interaction with space plasma

One of the advantages that drive nanosatellite development is the potential of multi-point observation through constellation operation. However, constellation deployment of nanosatellites has been a challenge, as thruster operations for orbit maneuver were limited due to mass, volume, and power. Recently, a de-orbiting mechanism using magnetic torquer interaction with space plasma has been introduced, so-called plasma drag. As no additional hardware nor propellant is required, plasma drag has the potential in being used as constellation deployment method. In this research, a novel constellation deployment method using plasma drag is proposed. Orbit decay rate of the satellites in a constellation is controlled using plasma drag in order to achieve a desired phase angle and phase angle rate. A simplified 1D problem is formulated for an elementary analysis of the constellation deployment time. Numerical simulations are further performed for analytical analysis assessment and sensitivity analysis. Analytical analysis and numerical simulation results both agree that the constellation deployment time is proportional to the inverse square root of magnetic moment, the square root of desired phase angle and the square root of satellite mass. CubeSats ranging from 1 to 3?U (1–3?kg nanosatellites) are examined in order to investigate the feasibility of plasma drag constellation on nanosatellite systems. The feasibility analysis results show that plasma drag constellation is feasible on CubeSats, which open up the possibility of CubeSat constellation missions.     

Analysis of the orbit lifetime of CubeSats in low Earth orbits including periodic variation in drag due to attitude motion

It is estimated that more than 22,300 human-made objects are in orbit around the Earth, with a total mass above 8,400,000 kg. Around 89% of these objects are non-operational and without control, which makes them to be considered orbital debris. These numbers consider only objects with dimensions larger than 10 cm. Besides those numbers, there are also about 2000 operational satellites in orbit nowadays. The space debris represents a hazard to operational satellites and to the space operations. A major concern is that this number is growing, due to new launches and particles generated by collisions. Another important point is that the development of CubeSats has increased exponentially in the last years, increasing the number of objects in space, mainly in the Low Earth Orbits (LEO). Due to the short operational time, CubeSats boost the debris population. One of the requirements for space debris mitigation in LEO is the limitation of the orbital lifetime of the satellites, which needs to be lower than 25 years. However, there are space debris with longer estimated decay time. In LEÓs, the influence of the atmospheric drag is the main orbital perturbation, and is used in maneuvers to increment the losses in the satellite orbital energy, to locate satellites in constellations and to accelerate the decay.The goal of the present research is to study the influence of aerodynamic rotational maneuver in the CubeSat?s orbital lifetime. The rotational axis is orthogonal to the orbital plane of the CubeSat, which generates variations in the ballistic coefficient along the trajectory. The maneuver is proposed to accelerate the decay and to mitigate orbital debris generated by non-operational CubeSats. The panel method is selected to determine the drag coefficient as a function of the flow incident angle and the spinning rate. The pressure distribution is integrated from the satellite faces at hypersonic rarefied flow to calculate the drag coefficient. The mathematical model considers the gravitational potential of the Earth and the deceleration due to drag. To analyze the effects of the rotation during the decay, multiple trajectories were propagated, comparing the results obtained assuming a constant drag coefficient with trajectories where the drag coefficient changes periodically. The initial perigees selected were lower than 400 km of altitude with eccentricities ranging from 0.00 to 0.02. Six values for the angular velocity were applied in the maneuver. The technique of rotating the spacecraft is an interesting solution to increase the orbit decay of a CubeSat without implementing additional de-orbit devices. Significant changes in the decay time are presented due to the increase of the mean drag coefficient calculated by the panel method, when the maneuver is applied, reducing the orbital lifetime, however the results are independent of the angular velocity of the satellite.     

A deorbiter CubeSat for active orbital debris removal

This paper introduces a mission concept for active removal of orbital debris based on the utilization of the CubeSat form factor. The CubeSat is deployed from a carrier spacecraft, known as a mothership, and is equipped with orbital and attitude control actuators to attach to the target debris, stabilize its attitude, and subsequently move the debris to a lower orbit where atmospheric drag is high enough for the bodies to burn up. The mass and orbit altitude of debris objects that are within the realms of the CubeSat’s propulsion capabilities are identified. The attitude control schemes for the detumbling and deorbiting phases of the mission are specified. The objective of the deorbiting maneuver is to decrease the semi-major axis of the debris orbit, at the fastest rate, from its initial value to a final value of about 6471?km (i.e., 100?km above Earth considering a circular orbit) via a continuous low-thrust orbital transfer. Two case studies are investigated to verify the performance of the deorbiter CubeSat during the detumbling and deorbiting phases of the mission. The baseline target debris used in the study are the decommissioned KOMPSAT-1 satellite and the Pegasus rocket body. The results show that the deorbiting times for the target debris are reduced significantly, from several decades to one or two years.     

Modeling and attitude control of CubeSat utilizing moving mass actuators

Any vehicle propelled by solid rocket motors (SRMs) must include an attitude control system capable of dealing with the torque generated by thrust misalignment. In order to expand the application of SRMs on CubeSats, an attitude control system utilizing moving mass actuators is discussed. The present research develops an eight-degree-of-freedom simulation model of a 2U CubeSat with two moving mass actuators. That model also considers the influence of propellant combustion processes. By analyzing the model disturbance source and systematic coupling, the key layout parameters are designed and a simplified control model is proposed. The controller is derived based on a combination of backstepping and sliding mode techniques. An orbit maneuver from 300 km circular orbit to 300 and 500 km elliptical orbit using this attitude control system is verified.     

The dynamics and control of the CubeSail mission: A solar sailing demonstration

The CubeSail mission is a low-cost demonstration of the UltraSail solar sailing concept (, ,  and ), using two near-identical CubeSat satellites to deploy a 260 m-long, 20 m² reflecting film. The two satellites are launched as a unit, detumbled, and separated, with the film unwinding symmetrically from motorized reels. The conformity to the CubeSat specification allows for reduction in launch costs as a secondary payload and utilization of the University of Illinois-developed spacecraft bus. The CubeSail demonstration is the first in a series of increasingly-complex missions aimed at validating several spacecraft subsystems, including attitude determination and control, the separation release unit, reel-based film deployment, as well as the dynamical behavior of the sail and on-orbit solar propulsion. The presented work describes dynamical behavior and control methods used during three main phases of the mission. The three phases include initial detumbling and stabilization using magnetic torque actuators, gravity-gradient-based deployment of the film, and steady-state film deformations in low Earth orbit in the presence of external forces of solar radiation pressure, aerodynamic drag, and gravity-gradient.     

Material selection for a CubeSat structural bus complying with debris mitigation

The increasing number of commercial, technological and scientific missions for CubeSats poses several concerns about the topic of space junk and debris mitigation. As no regulation is currently in place, innovative solutions are needed to mitigate the impact that Low Earth Orbit objects can have during uncontrolled re-entry and the associated potential events of surface collision. We investigated the requirements, in terms of materials selection, for the development of a 3D-printed structural bus able to withstand loads during launch and in-orbit operations, with the objectives to be as light as possible and requiring the least amount of heat for demise during atmospheric re-entry. The selection indicated magnesium alloys as the best candidates to improve the reference material, aluminium 6061 T6, resulting in both mass-reduction and improved demisability. We also analysed how the relative importance of these two objectives can modify the selection of materials: if minimizing the heat to disintegration were valued more highly than lightness, for example, the new best candidates would become tin alloys. Our analysis, furthermore, suggested the importance of Liquid Crystal Polymer as the sole plastic material approaching the performance of the best metal choices. This contribution, thus, provides novel insight in the field of 3D-printed materials for the fast-growing CubeSat segment, complying with the debris mitigation initiatives promoted by space agencies and institutions.     

The ESA SMART-1 mission to the Moon with solar electric propulsion

SMART-1 is planned to be the first Small Mission for Advanced Research in Technology of the ESA Scientific Programme Horizons 2000 for a launch at the end of 2001. The mission is dedicated to the testing of new technologies for preparing future cornerstone missions, using Solar Electrical Propulsion in Deep Space. The mission operational lifetime includes a 6–17 months cruise until a lunar orbit (300–10000 km) with 6 month operations. The SMART-1 spacecraft will be launched either on Ariane 5 as auxiliary passenger or on Eurockot. The expected launch mass is 350 kg. This allows to bring a dedicated payload with spacecraft, instrument and electric propulsion diagnostics technologies, as well as giving an opportunity for new lunar geophysical and geochemical studies, and for cruise science on the way to the Moon.     

Life support approaches for Mars missions.

Life support approaches for Mars missions are evaluated using an equivalent system mass (ESM) approach, in which all significant costs are converted into mass units. The best approach, as defined by the lowest mission ESM, depends on several mission parameters, notably duration, environment and consequent infrastructure costs, and crew size, as well as the characteristics of the technologies which are available. Generally, for the missions under consideration, physicochemical regeneration is most cost effective. However, bioregeneration is likely to be of use for producing salad crops for any mission, for producing staple crops for medium duration missions, and for most food, air and water regeneration for long missions (durations of a decade). Potential applications of in situ resource utilization need to be considered further.     

The effect of a rocky terrain for CubeSat landing on asteroid surfaces

The paper describes a general modelling procedure to build a simulation tool to investigate contact motion of a CubeSat on an asteroid surface. We investigate landing performance and landing success for the case of elastic rocky terrain and flat surfaces. As a case study, we focus on the disposal of ESA’s Hera Milani CubeSat by landing on the moon of Didymos binary asteroid system. The simulation environment includes the modelling of real shape and 6-DOF motion of the lander, the shape-based gravity models of Didymos and Dimorphos and rocks on surface, that are generated as physical obstacles. Trends and estimates on the performance of the landing phase and the most relevant effects on the outcome of the soil interaction process, are inferred. The statistical results on settling time, dispersion area and motion characteristics, such as number of bounces, show and quantify the effect of rocks on a successful passive and permanent landing.     

Vertical TEC in the equatorial anomaly region from satellite altimetry data

The high-precision demands imposed by the ocean altimetry community of the late 1980 resulted in the TOPEX/Poseidon mission. This mission was the first to carry as its main instrument a dual-frequency sea-altimeter on board a satellite. This instrument together with other state-of-the-art technologies involved in the mission, led to sea-height determinations with precision better than 2 cm. As a by-product, the TOPEX/Poseidon mission provided vertical TEC determinations that since they became available, have demonstrated to be a powerful tool for ionospheric studies.     

Design considerations for sustainable spacecraft water management systems

It is well recognized that water handling systems used in a spacecraft are prone to failure caused by biofouling and mineral scaling, which can clog mechanical systems and degrade the performance of capillary-based technologies. Long duration spaceflight applications, such as extended stays at a Lunar Outpost or during a Mars transit mission, will increasingly benefit from hardware that is generally more robust and operationally sustainable over time.     

Novel concept of satellite manoeuvre planning using graph theoretical techniques

Manoeuvrable, responsive satellite constellations that respond to real time events could provide data on demand for time-critical tasks, such as disaster monitoring and relief efforts. The authors demonstrate the feasibility of such a system by expanding on a fully analytical method for designing responsive spacecraft manoeuvres using low thrust propulsion. These manoeuvres are perceived as a graph that enables efficient exploration and optimised selection of favourable routes that achieve mission goals while highlighting resilience and redundancy in the mission’s execution. A case study is presented that considers four satellites required to provide flyovers of two targets, with an associated graph of 10,839 possible manoeuvres. Investigation of the graph highlights that a good, but not minimum time, solution can allow the system to perform well, while also providing greater resilience to changes in mission priorities and errors in execution. This analytical approach enables operators to trade-off between a loss of time by using only one satellite versus the disruption of moving multiple satellites for a potentially faster response. The impact of varying mission capabilities, such as using fewer satellites, smaller swath width or less propellant, can be evaluated by reducing the graph without recalculating manoeuvre options.