Mapping orbits around the asteroid 2001SN263

The present paper has the goal of mapping orbits, with respect to the perturbations, for a spacecraft traveling around the asteroid 2001SN₂₆₃. This asteroid is a triple system, which center of mass is in an elliptic orbit around the Sun. The perturbations considered in the present model are the ones due to the oblateness of the central body, the gravity field of the two satellite bodies (Beta and Gamma), the Sun, the Moon, the asteroids Vesta, Pallas and Ceres and all the planets of the Solar System. This mapping is important, because it shows the relative importance of each force for a given orbit for the spacecraft, helping to make a decision about which forces need to be included in the model for a given accuracy and nominal orbit. Another important application of this type of mapping is to find orbits that are less perturbed, since it is expected that those orbits have good potential to require a smaller number of station-keeping maneuvers. Simulations under different conditions are made to find those orbits. The main reason to study those trajectories is that, currently, there are several institutions in Brazil studying the possibility to make a mission to send a spacecraft to this asteroid (the so-called ASTER mission), because there are many important scientific studies that can be performed in that system. The results showed that Gamma is the main perturbing body, followed by Beta (10 times smaller) and the group Sun–Mars-oblateness of Alpha, with perturbations 1000 times weaker than the effects of Gamma. The other bodies have perturbations 10⁷ times smaller. The results also showed that circular and polar orbits are less perturbed, when compared to elliptical and equatorial orbits. Regarding the semi-major axis, an internal orbit is the best choice, followed by a larger external orbit. The inclination of the orbit plays an important role, and there are values for the inclination where the perturbations show minimum and maximum values, so it is important to make a good decision on those values.     

A mission concept for the low-cost large-scale exploration and characterisation of near earth objects

This paper presents the preliminary mission and science analysis of a new mission concept for the large scale, low-cost exploration of Near Earth Objects (NEOs). The concept is to enable close range observations of NEOs by performing close flybys of a series of NEOs at one of their nodal points, with pairs of small spacecraft flying in formation. The paper presents a preliminary assessment of accessible asteroids and multi-target tour trajectories from data available in the JPL small-body database.The main instruments on board each spacecraft are a camera and a LIDAR which together can be used for orbit determination, surface imaging, direct asteroid ranging and asteroid mass estimation via intersatellite ranging. The paper provides a qualitative and quantitative assessment of the measurable quantities during each flyby. In particular, the feasibility of a novel method of NEO mass estimation is assessed.     

ASTEX: An in situ exploration mission to two near-Earth asteroids

ASTEX (ASTeroid EXplorer) is a concept study of an in situ exploration mission to two Near-Earth-Asteroids (NEAs), which consists of an orbiting element and two individual lander units. The target candidates have different mineralogical compositions, i.e. one asteroid is chosen to be of “primitive’’ nature, the other to be a fragment of a differentiated asteroid. The main scientific goals of the ASTEX mission are the exploration of the physical, geological, and mineralogical nature of the NEAs. The higher level goal is the provision of information and constraints on the formation and evolution of our planetary system. The study identified realistic mission scenarios, defined the strawman payload as well as the requirements and options for the spacecraft bus including the propulsion system, the landers, the launcher, and assessed and defined the requirements for the mission’s operational ground segment.     

从日地系统L2出发借力月球飞越近地小行星

对于停留在日地系统L2的“嫦娥2号”探测器,其后续飞行方案有多个选项,例如主动撞月或重返月球轨道、返回地球轨道或再入大气、飞往地月系统L1/L2或日地系统L1、进入深空飞越近地小行星(最终,“嫦娥2号”于2012年12月13日成功地实现了对Toutatis小行星的近距离飞越)。探讨上述的飞行方案需要对飞行轨道进行初步设计,总的速度脉冲限制在100 m/s以内并且需要考虑探测器同时受到太阳、地球、月球的引力作用。本研究设计了探测器从日地系统L2出发借力月球实现Toutatis小行星飞越的飞行方案,与直接飞越方案相比,借力月球可以进一步节省探测器的燃料消耗,其等效速度脉冲设计值为58.47 m/s。     

Single photon laser altimeter simulator and statistical signal processing

Spaceborne altimeters are common instruments onboard the deep space rendezvous spacecrafts. They provide range and topographic measurements critical in spacecraft navigation. Simultaneously, the receiver part may be utilized for Earth-to-satellite link, one way time transfer, and precise optical radiometry. The main advantage of single photon counting approach is the ability of processing signals with very low signal-to-noise ratio eliminating the need of large telescopes and high power laser source. Extremely small, rugged and compact microchip lasers can be employed. The major limiting factor, on the other hand, is the acquisition time needed to gather sufficient volume of data in repetitive measurements in order to process and evaluate the data appropriately. Statistical signal processing is adopted to detect signals with average strength much lower than one photon per measurement. A comprehensive simulator design and range signal processing algorithm are presented to identify a mission specific altimeter configuration. Typical mission scenarios (celestial body surface landing and topographical mapping) are simulated and evaluated. The high interest and promising single photon altimeter applications are low-orbit (∼10 km) and low-radial velocity (several m/s) topographical mapping (asteroids, Phobos and Deimos) and landing altimetry (∼10 km) where range evaluation repetition rates of ∼100 Hz and 0.1 m precision may be achieved. Moon landing and asteroid Itokawa topographical mapping scenario simulations are discussed in more detail.     

A small mission for in situ exploration of a primitive binary near-Earth asteroid

We present a concept for a challenging in situ science mission to a primitive, binary near-Earth asteroid. A sub-400-kg spacecraft would use solar electric propulsion to rendezvous with the C-class binary asteroid (175706) 1996 FG3. A campaign of remote observations of both worlds would be followed by landing on the ∼1 km diameter primary to perform in situ measurements. The total available payload mass would be around 34 kg, allowing a wide range of measurement objectives to be addressed. This mission arose during 2004 from the activities of the ad-hoc Small Bodies Group of the DLR-led Planetary Lander Initiative. Although the particular mission scenario proposed here was not studied further per se, the experience was carried over to subsequent European asteroid mission studies, including first LEONARD and now the Marco Polo near-Earth asteroid sample return proposal for ESA’s Cosmic Vision programme. This paper may thus be of interest as much for insight into the life cycle of mission proposals as for the concept itself.     

Selenodetic experiments of SELENE: Relay subsatellite,differential VLBI,and laser altimeter

Since 1960s, the gravitational potential of the Moon has been extensively studied from Doppler tracking data between a ground station and spacecraft orbiting in front of the Moon (e. g., Lorell and Sjogren, 1968; Bills and Ferrari, 1980; Konopliv et al., 1993; Lemoine et al., 1997). Because direct radio communication is interrupted while spacecraft is orbiting behind the Moon, however, the coverage of tracking data has been limited mostly to the nearside of the Moon so far. In order to compensate for such lack of tracking data, we propose satellite-to-satellite Doppler measurement by using a relay subsatellite in Japanese mission to the Moon in 2003. A complete coverage of Doppler tracking from an orbiter at sufficiently low altitude will significantly improve lunar gravity model and will contribute for future geophysical study of interior and tectonics on the Moon. Further, we propose differential VLBI experiment between the subsatellite and a propulsion module landed on the surface of the Moon. The differential VLBI is about 10 times more accurate than conventional Doppler measurement for long-wavelength gravity field. Besides, differential VLBI is sensitive to the displacement perpendicular to the line of sight. Thus the VLBI experiment provides precise estimates of the lunar gravity potential at low degree. The last proposal for selenodetic experiments is a laser altimeter. Global topography model has been already developed from the analysis of Clementine LIDAR data (Zuber et al., 1994), but it is suggested that the model includes appreciable anisotropy between NS and E-W directions due to highly eccentric orbit of Clementine spacecraft (Bills and Lemoine, 1995). The laser altimeter experiment from an orbiter in nearly circular orbit will provide a new reference for the isotropic lunar topography model.     

Synergistic approach of asteroid exploitation and planetary protection

The asteroid and cometary impact hazard has long been recognised as an important issue requiring risk assessment and contingency planning. At the same time asteroids have also been acknowledged as possible sources of raw materials for future large-scale space engineering ventures. This paper explores possible synergies between these two apparently opposed views; planetary protection and space resource exploitation. In particular, the paper assumes a 5 tonne low-thrust spacecraft as a baseline for asteroid deflection and capture (or resource transport) missions. The system is assumed to land on the asteroid and provide a continuous thrust able to modify the orbit of the asteroid according to the mission objective. The paper analyses the capability of such a near-term system to provide both planetary protection and asteroid resources to Earth. Results show that a 5 tonne spacecraft could provide a high level of protection for modest impact hazards: airburst and local damage events (caused by 15–170 m diameter objects). At the same time, the same spacecraft could also be used to transport to bound Earth orbits significant quantities of material through judicious use of orbital dynamics and passively safe aero-capture manoeuvres or low energy ballistic capture. As will be shown, a 5 tonne low-thrust spacecraft could potentially transport between 12 and 350 times its own mass of asteroid resources by means of ballistic capture or aero-capture trajectories that pose very low dynamical pressures on the object.     

A multiple-rendezvous,sample-return mission to two near-Earth asteroids

We propose a dual-rendezvous mission, targeting near-Earth asteroids, including sample-return. The mission, Asteroid Sampling Mission (ASM), consists of two parts: (i) flyby and remote sensing of a Q-type asteroid, and (ii) sampling of a V-type asteroid. The targeted undifferentiated Q-type are found mainly in the near-Earth space, and to this date have not been the target of a space mission. We have chosen, for our sampling target, an asteroid from the basaltic class (V-type), as asteroids in this class exhibit spectral signatures that resemble those of the well-studied Howardite–Eucrite–Diogenite (HED) meteorite suite. With this mission, we expect to answer specific questions about the links between differentiated meteorites and asteroids, as well as gain further insight into the broader issues of early Solar System (SS) evolution and the formation of terrestrial planets. To achieve the mission, we designed a spacecraft with a dry mass of less than 3 tonnes that uses electric propulsion with a solar-electric power supply of 15 kW at 1 Astronomical Unit (AU). The mission includes a series of remote sensing instruments, envisages landing of the whole spacecraft on the sampling target, and employs an innovative sampling mechanism. Launch is foreseen to occur in 2018, as the designed timetable, and the mission would last about 10 years, bringing back a 150 g subsurface sample within a small re-entry capsule. This paper is a work presented at the 2008 Summer School Alpbach,“Sample return from the Moon, asteroids and comets” organized by the Aeronautics and Space Agency of the Austrian Research Promotion Agency. It is co-sponsored by ESA and the national space authorities of its Member and Co-operating States, with the support of the International Space Science Institute and Austrospace.     

Accurate approximation of in-ecliptic trajectories for E-sail with constant pitch angle

Propellantless continuous-thrust propulsion systems, such as electric solar wind sails, may be successfully used for new space missions, especially those requiring high-energy orbit transfers. When the mass-to-thrust ratio is sufficiently large, the spacecraft trajectory is characterized by long flight times with a number of revolutions around the Sun. The corresponding mission analysis, especially when addressed within an optimal context, requires a significant amount of simulation effort. Analytical trajectories are therefore useful aids in a preliminary phase of mission design, even though exact solution are very difficult to obtain. The aim of this paper is to present an accurate, analytical, approximation of the spacecraft trajectory generated by an electric solar wind sail with a constant pitch angle, using the latest mathematical model of the thrust vector. Assuming a heliocentric circular parking orbit and a two-dimensional scenario, the simulation results show that the proposed equations are able to accurately describe the actual spacecraft trajectory for a long time interval when the propulsive acceleration magnitude is sufficiently small.     

基于金星共振借力的太阳抵近探测任务轨道设计

对于太阳抵近探测任务,从地球直接发射探测器至太阳附近需要消耗巨大能量,通过多次金星借力飞行,可有效降低地球发射能量C₃及中途变轨的燃料消耗.本文研究基于金星共振借力的太阳抵近探测任务轨道优化设计,建立了连续共振借力和混合共振借力的转移轨道优化设计模型,并针对2025—2028年的发射窗口开展太阳抵近探测任务轨道优化设计.仿真结果表明,相比连续共振借力,混合共振借力可以有效缩短太阳抵近探测任务的轨道转移时间,对于地球发射能量C₃和中途变轨燃料消耗的影响未见明显的规律性,能量降低与序列中的共振比相关.     

Design of a formation of solar pumped lasers for asteroid deflection

This paper presents the design of a multi-spacecraft system for the deflection of asteroids. Each spacecraft is equipped with a fibre laser and a solar concentrator. The laser induces the sublimation of a portion of the surface of the asteroid, and the resultant jet of gas and debris thrusts the asteroid off its natural course. The main idea is to have a formation of spacecraft flying in the proximity of the asteroid with all the spacecraft beaming to the same location to achieve the required deflection thrust. The paper presents the design of the formation orbits and the multi-objective optimisation of the formation in order to minimise the total mass in space and maximise the deflection of the asteroid. The paper demonstrates how significant deflections can be obtained with relatively small sized, easy-to-control spacecraft.     

Giotto extended mission

The navigation of the ESA spacecraft Giotto to its encounter with comet P/Halley on 14 March 1986 required just 10% of the fuel available. Although the spacecraft was damaged by dust impacts during its close flyby at the nucleus of P/Halley it was retargeted to return close to Earth to maintain the option to extend the mission to encounter another comet, P/Grigg-Skjellerup on 10 July 1992.

On 2 April 1986 the spacecraft was put into hibernation configuration and had been orbiting the Sun in the ecliptic with an orbital period of 10 months. On 19 February 1990 it was reactivated, spacecraft subsystems and the payload checked out to determine its health status.

On 2 July 1990 Giotto performed succesfully the first-ever Earth gravity assist manoeuvre of a spacecraft approaching the Earth from deep space and was retargeted for comet P/Grigg--Skjellerup. It was concluded that the spacecraft is ready to provide valuable data during a potential encounter with a second comet.     

Multiobjective genetic optimization of Earth–Moon trajectories in the restricted four-body problem

In this paper, optimal trajectories of a spacecraft traveling from Earth to Moon using impulsive maneuvers (ΔV maneuvers) are investigated. The total flight time and the summation of impulsive maneuvers ΔV are the objective functions to be minimized. The main celestial bodies influencing the motion of the spacecraft in this journey are Sun, Earth and Moon. Therefore, a three-dimensional restricted four-body problem (R4BP) model is utilized to represent the motion of the spacecraft in the gravitational field of these celestial bodies. The total ΔV of the maneuvers is minimized by eliminating the ΔV required for capturing the spacecraft by Moon. In this regard, only a mid-course impulsive maneuver is utilized for Moon ballistic capture. To achieve such trajectories, the optimization problem is parameterized with respect to the orbital elements of the ballistic capture orbits around Moon, the arrival date and a mid-course maneuver time. The equations of motion are solved backward in time with three impulsive maneuvers up to a specified low Earth parking orbit. The results show high potential and capability of this type of parameterization in finding several Pareto-optimal trajectories. Using the non-dominated sorting genetic algorithm with crowding distance sorting (NSGA-II) for the resulting multiobjective optimization problem, several trajectories are discovered. The resulting trajectories of the presented scheme permit alternative trade-off studies by designers incorporating higher level information and mission priorities.     

Small satellite survey mission to the second Earth moon

This paper presents an innovative space mission devoted to the survey of the small Earth companion asteroid by means of nano platforms. Also known as the second Earth moon, Cruithne, is the target identified for the mission. Both the trajectory to reach the target and a preliminary spacecraft budget are here detailed. The idea is to exploit high efficient ion thrusters to reduce the propellant mass fraction in such a high total impulse mission (of the order of 1e6 Ns). This approach allows for a 100 kg class spacecraft with a very small Earth escape energy (5 km²/s²) to reach the destination in about 320 days. The 31% propellant mass fraction allows for a payload mass fraction of the order of 8% and this is sufficient to embark on such a small spacecraft a couple of nano-satellites deployed once at the target to carry out a complete survey of the asteroid. Two 2U Cubesats are here considered as representative payload, but also other scientific payloads or different platforms might be considered according with the specific mission needs. The small spacecraft used to transfer these to the target guarantees the manoeuvre capabilities during the interplanetary journey, the protection against radiations along the path and the telecommunication relay functions for the data transmission with Earth stations. The approach outlined in the paper offers reliable solutions to the main issues associated with a deep space nano-satellite mission thus allowing the exploitation of distant targets by means of these tiny spacecraft. The study presents an innovative general strategy for the NEO observation and Cruithne is chosen as test bench. This target, however, mainly for its relevant inclination, requires a relatively large propellant mass fraction that can be reduced if low inclination asteroids are of interest. This might increase the payload mass fraction (e.g. additional Cubesats and/or additional scientific payloads on the main bus) for the same 100 kg class mission.     

Ulysses charged particle measurements between 1 and 5 AU from the sun.

Proton fluxes obtained by two instruments carried on the ESA/NASA Ulysses spacecraft are reported for the period from launch in October 1990 till Jupiter encounter in February 1992. Proton energy ranges are 24-59, 71-99, 130-320, 320-2100 and > 2100 MeV. The Sun was very active during this period, the events of March 1991 being some of the largest of the solar cycle. The relationship between events on the Sun and the observed proton flux is discussed.     

KuaFu Mission

The KuaFu mission-Space Storms, Aurora and Space Weather Explorer-is an "L1+Polar" triple satellite project composed of three spacecraft: KuaFu-A will be located at L1 and have instruments to observe solar EUV and FUV emissions, and white-light Coronal Mass Ejections (CMEs), and to measure radio waves, the local plasma and magnetic field,and high-energy particles. KuaFuB1 and KuaFu- B2 will bein polar orbits chosen to facilitate continuous 24 hours a day observation of the north polar Aurora Oval. The KuaFu mission is designed to observe the complete chain of disturbances from the solar atmosphere to geospace, including solar flares, CMEs, interplanetary clouds, shock waves, and their geo-effects, such as magnetospheric sub-storms and magnetic storms, and auroral activities. The mission may start at the next solar maximum (launch in about 2012), and with an initial mission lifetime of two to three years. KuaFu data will be used for the scientific study of space weather phenomena, and will be used for space weather monitoring and forecast purposes. The overall mission design, instrument complement, and incorporation of recent technologies will target new fundamental science, advance our understanding of the physical processes underlying space weather, and raise the standard of end-to-end monitoring of the Sun-Earth system.     

Sun earth connection coronal and heliospheric investigation (SECCHI)

The Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI) on the NASA Solar Terrestrial Relations Observatory (STEREO) mission is a suite of remote sensing instruments consisting of an extreme ultraviolet imager, two white light coronagraphs, and a heliospheric imager. Two spacecraft with identical instrumentation will obtain simultaneous observations from viewpoints of increasing separation in the ecliptic plane. In support of the STEREO mission objectives, SECCHI will observe coronal mass ejections from their birth at the Sun, through the outer corona, to their impact at Earth. The SECCHI program includes a coordinated effort to develope magneto-hydrodynamic models and visualization tools to interpret the images that will be obtained from the two spacecraft viewpoints. The resulting three-dimensional analysis of CMEs will help to resolve some of the fundamental outstanding questions in solar physics.     

Photoelectric and CCD photometry of 951 Gaspra

The asteroid 951 Gaspra is a fly-by target for the Galileo space mission. This encounter, planned for October 1991, will represent the first possibility to show an asteroid in close-up. In preparation to this close encounter an earth-based international observing campaign started in 1988 /1,2/, with the goal to provide a substantial data base on the photometric and rotational properties of this object. This will allow on one side to support and optimize the planning of the fly-by and, on the other side, to verify the accuracy of current models for the determination of shapes, surface textures, spin axis orientation and composition. In this paper we present the composite lightcurve of 951 Gaspra obtained from photoelectric and CCD observations, carried out during the 1990 apparition at the observatories of Asiago, Catania and Loiano (Italy).

We have determined the sidereal rotational period, the prograde sense of rotation, the H and G parameters and the B-V and V-R color indices.     

The VESTA project: Combined studies of Mars and small bodies of the solar system

A mission to Mars and small solar system bodies is presently studied as a possible collaboration between INTERCOSMOS, CNES, ESA and eventually other participants. The VESTA concept, based on the same strategy as the successful VEGA mission, is more ambitious, as two spacecrafts separate soon after launch: a soviet spacecraft, dedicated to the study of Mars, and a spacecraft dedicated to the study of small bodies, under the responsibility of CNES and ESA. This spacecraft would use Mars gravity assists to visit up to 4 small bodies in less than 5 years. The mission is duplicated, which means that up to 8 small bodies could be studied (e.g. 6 main belt asteroids, 1 apollo-amor asteroid and 1 short period comet). Low relative velocities (< 3.5 km/s) should allow to drop a penetrator on two large main belt asteroids, such as 4 Vesta and 1 Ceres (1994 launch).