共查询到20条相似文献,搜索用时 46 毫秒
1.
利用计算流体力学软件Fluent对纳米颗粒射流超光滑加工的流场分布特点进行了流体动力学分析。基于仿真结果对去除函数的变化规律进行了研究,通过具体实验来对流体动力学仿真结果进行了验证。搭建了纳米射流抛光装置,利用该装置对熔石英元件进行了加工。原子力显微镜观测结果表明熔石英元件表面粗糙度RMS值由初始的0.680nm减小到了0.307nm,实现了超光滑加工。 相似文献
2.
基于浮法抛光和磨料射流抛光原理提出了一种动压浮动间隙自适应射流抛光方法以实现工件的非接触超低损伤加工,并进行了加工装置的结构优化设计.该装置主要由浮动加载机构、射流旋转结构和动压抛光盘组成.通过控制射流喷射压力和恒定加载载荷可以实现加工过程中的间隙自适应,稳定去除工件材料.利用该抛光装置可以在获得优良的表面质量的同时保持良好的面形精度. 相似文献
3.
介绍了浮法抛光的机械结构与抛光原理,并采用这种技术在CJY500超精密研磨机上进行长方形GCr15轴承钢工件超光滑表面的工艺试验,成功获得了无加工变质层的金属纳米级超光滑表面,拓展了浮法抛光技术的应用范围,对于金属工件纳米级超光滑表面的加工具有参考价值. 相似文献
4.
5.
随着航空航天、国防科技、能源等领域的快速发展,具有优良机械性能的高强度合金材料及复合材料得到广泛应用,实现这些材料的高效精密低损伤加工具有重要意义。低温等离子体富含活性粒子,能有效改善材料的可切削性,且较易产生、维持和控制,已被广泛应用于难加工材料的辅助加工过程中。在介绍低温等离子体基本特性及分类的基础上,结合国内外低温等离子体辅助加工技术的研究现状,以表面粗糙度、材料去除率、表面损伤、切削力等参数为评价指标,分别阐述了等离子体熔射成形技术、等离子体加热辅助切削技术、冷等离子体射流辅助抛光技术、冷等离子体射流辅助切削技术等的作用机理及效果,并对其发展趋势进行了展望。 相似文献
6.
对CVD金刚石膜的离子束铣削、电子束加工、激光加工、化学辅助机械抛光、热化学抛光等抛光技术的加工方法与原理进行了介绍,分析了这些方法的优点和不足之处。并展望了CVD金刚石薄膜抛光技术的发展方向。 相似文献
7.
8.
设计了一套基于射频电容耦合放电原理的大气等离子体抛光原型装置,电容耦合等离子体炬首次被应用到了抛光系统中。针对SiC反射镜的加工实验结果表明,系统工作正常,并可以实现亚纳米级的表面粗糙度。 相似文献
9.
磁射流抛光中磁场的分析与设计 总被引:8,自引:0,他引:8
介绍了一种新型抛光技术——磁射流抛光中磁场对磁流变液粘度的影响,设计了相适应的磁场形式,重点分析了铁磁喷嘴头部形状对磁场的影响,并通过ANSYS有限元软件仿真了结构形状对磁场空间特性的影响。 相似文献
10.
11.
12.
13.
14.
现代特种加工技术的发展 总被引:12,自引:0,他引:12
简述了特种加工的技术特点和未来发展趋势,分别论述了高能束流加工、电火花加工、电解加工、物料切蚀加工和复合加工技术的概念、特征与应用状况。 相似文献
15.
16.
17.
综述了精密机械加工、高能束加工、微细电火花加工、化学加工、电化学加工等多种精细金属网/栅制造方法的优缺点及其发展现状.因具有适用材料广泛、加工效率高、表面质量好、无机械切削应力、孔形不受限制等优点,掩模微细电解加工在精细金属网/栅制造方面潜力巨大. 相似文献
18.
《中国航空学报》2020,33(10):2782-2793
Superalloys are commonly used in aircraft manufacturing; however, the requirements for high surface quality and machining accuracy make them difficult to machine. In this study, a hybrid electrochemical discharge process using variable-amplitude pulses is proposed to achieve this target. In this method, electrochemical machining (ECM) and electrical discharge machining (EDM) are unified into a single process using a sequence of variable-amplitude pulses such that the machining process realizes both good surface finish and high machining accuracy. Furthermore, the machining mechanism of the hybrid electrochemical discharge process using variable-amplitude pulses is studied. The mechanism is investigated by observations of machining waveforms and machined surface. It is found that, with a high-frequency transformation between high- and low-voltage waveforms within a voltage cycle, the machining mechanism is frequently transformed from EDM to pure ECM. The critical discharge voltage is 40 V. When pulse voltages greater than 40 V are applied, the machining accuracy is good; however, the surface has defects such as numerous discharge craters. High machining accuracy is maintained when high-voltage pulses are replaced by low-voltage pulses to enhance electrochemical dissolution. The results indicate that the proposed hybrid electrochemical discharge process using variable-amplitude pulses can yield high-quality surfaces with high machining accuracy. 相似文献
19.
近年来微小孔结构在航空航天零部件上的应用越来越广泛,对微小孔的特种加工方法的进展情况进行了综述,总结了每种加工方法的主要特点,并对当前微小孔特种加工技术存在的问题及未来发展趋势进行了总结和展望. 相似文献
20.
《中国航空学报》2021,34(2):28-53
Because of several advantages, such as no tool wear, independence on the mechanical properties of the material, and high machining efficiency, electrochemical machining (ECM) has become a viable method for machining components in numerous industrial applications, particularly in the manufacture of typical aero-engine components with complex structures fabricated from materials that are difficult to cut. This paper highlights the current developments, new trends, and technological advances of key factors of ECM, such as electrochemical dissolution characteristics of novel difficult to cut materials which are often used in aero-engine, numerical simulation of electrochemical process, design for the complex profile and structure of cathode tool, flow field simulation and design for uniform electrolyte flow, and innovation of electrochemical machining or hybrid methods which reflect the state of the art in academic and industrial research on electrochemical machining in aero-engine manufacturing. 相似文献