Global avionics in the future

The following topics are discussed: new batteries for old airplanes; new charge controls for lengthening battery life; fast methods for batteries charging; AC conductance measurement based battery testing; pulse power; bipolar lead-acid batteries vs supercapacitors; Ni electrode cells for spacecraft; worn-out battery disposal; recycling technology; vehicle batteries cost; high energy content batteries; and energy storage for electric utilities     

Perspective on ultracapacitors for electric vehicles

Recent advances in performance of chemical double layer capacitors (DLC) with aqueous and non-aqueous electrolytes have made it possible to seriously consider them for commercialization. Non-aqueous (organic) carbon based laboratory monopolar devices have recently met key U.S. Department of Energy (DoE) mid-term specifications (> 5 WNkg, >500 W/kg and >100,000 life cycles) for load-leveling electric vehicles batteries. All DLC technologies currently under development by DoE are discussed. Each technology has distinct advantages and none are clear winners at this time. A study has been completed by the General Electric Company on the interface electronics needed to best utilize the energy of capacitors for load-leveling batteries. System costs are presented based on this study, several battery technologies, and capacitor projections     

Industrial battery technologies and markets

Industrial battery market segments generally fall into two major categories--traction batteries, also called motive power batteries; and stationary batteries, also referred to as standby power batteries. The major industrial battery subcategories are discussed. Industrial trucks and rail and mine vehicles represent two major subcategories of motive power batteries. Industrial trucks include forklifts, automated guided vehicles (AGVs), various types of towing vehicles, floor cleaning equipment and so forth. Battery-powered rail and mine vehicles are used in mines where gas is present that could be ignited by spark ignition engines. Locomotive starting batteries and railcar emergency power batteries are also included in the second subcategory. The distinction is beginning to blur between valve-regulated industrial batteries and golf cart or marine batteries. Both industrial and SLI(starting/lighting/ignition)-derivative batteries are competing for markets in the future. The future trends in industrial battery production in Japan, USA and Europe are discussed     

Hubble Space Telescope at twelve years of age

The Hubble Space Telescope was deployed from the Space Shuttle Discovery into a 380-mile high Earth orbit on April 25, 1990. It subsequently made outstanding astronomical discoveries with its 8-foot (2.4-meter) telescope and other scientific instruments. Critical to the successful observations was continuous availability of power from its solar arrays during sunlit periods, and from nickel-hydrogen batteries when the satellite was in the Earth's shadow. The adopted nickel-hydrogen batteries were carefully selected and tested to confirm their depth-of-discharge and operating temperature that delivered the longest life in charge/discharge cycling service. These batteries had a design life of 7 years. At 12 years after launch the Hubble batteries have delivered more charge/discharge cycles than any other batteries in low-Earth orbit. However, the Hubble batteries have been subjected to many unexpected stresses, and peculiar reductions in battery capacity have been observed. Battery replacement requires a costly trip to the Hubble Space Telescope by astronauts, so the remaining useful life of the batteries must be predicted. Already in four servicing missions, astronauts have replaced or modified optics, solar arrays, a power control unit, and various science packages. A fifth servicing mission is scheduled in 2004. This paper discusses battery charging hardware and software controls, history of battery events in Hubble, cell performance model and spare battery tests, and capacity walkdown.     

Life cycle testing of a sealed 24-V, 42-Ah nickel-cadmium aircraftbattery

Extensive research has been conducted in the design and manufacture of very long life sealed maintenance free nickel-cadmium aircraft batteries. This study presents data on a 100% depth of discharge (DOD) life test performed on a nominal capacity 42-Ah battery. The purpose of this study is to validate design concepts, determine the life characteristics of the newly designed sealed Ni-Cd batteries, and develop baseline information on failure rates and mechanisms. The data from this experiment can be used to compare depth of discharge versus battery life with similar tests such as the lower DOD experiments performed on spacecraft batteries. This information is important in the ongoing development of long life batteries and in developing failure models for life prediction     

Bipolar nickel-metal hydride batteries for aerospace applications

Electro Energy Inc. (EEI) is developing high power, long life, bipolar nickel-metal hydride batteries for aerospace applications. Bipolar nickel-metal hydride designs allow for high energy and high power designs with a 25 percent reduction in both weight and volume as compared to prismatic and/or cylindrical Ni-MH designs. Utilizing a sealed wafer cell design EEI has demonstrated a 1.2 kW/kg power capability. Prototype designs have achieved 70 Wh/kg. Designs studies show 80 Wh/kg are achievable with EEI's state-of-the-art technology. The sealed wafer cell is the building block for EEI's high power and high voltage bipolar batteries making the assembly easy and significantly lower in cost. Satellite and aircraft batteries are being developed which provide high power and long life. Sealed cells now show excellent rate capability and life. Cells tested in a low earth orbit (LEO) cycle have reached 9000 cycles and continue on test. High power, bipolar battery designs are ideal in applications where using conventional aerospace battery technology would require excessive capacity; weight and volume, thereby reducing usable payload on the vehicle     

锌银电池组延寿试验

为了延长一次性使用的锌银电池组寿命，经多年研究，找出了影响电池组性能的原因并采取了改善措施。本文重点论述了电池组延寿的几种方法。     

The passenger aircraft cargo hold environment: the implications of a fire on lithium-ion battery shipments

Although very rare events, fires in aircraft cargo holds are a concern for regulators, aircraft operators, and passengers. Lithium-ion cells and batteries are often shipped as cargo aboard passenger aircraft. This paper provides an overview of cargo hold configurations and fire suppression systems in passenger aircraft. Next, ways in which a cargo hold fire might affect a shipment of lithium-ion cells or batteries, and the degree to which the cells or batteries might interact with a fire are discussed. Finally, the results of FAA simulated cargo hold fire testing are presented and discussed in the context of lithium-ion cell or battery shipments.     

Battery configurations for multi-megawatt pulse power

The capability of lead-acid batteries for supplying very high power for a short time is explored. The application of such a battery for accelerating a hypersonic plane is used to illustrate the requirements. A technique for analyzing batteries and controlling voltage for pulse loads is described. Evaluation of lead-acid batteries in production and voltage regulation by switching batteries in and out are covered. Alternatives to batteries, including superconducting magnetic energy storage, are discussed     

U.S. Army battery needs-present and future

The purpose of this paper is to describe the needs of the U.S. Army for silent portable power sources, both in the near and longer term future. As a means of doing this, the programs of the Power Sources Division of the Army Research Laboratory are discussed. In carrying out these programs, the personnel of the Power Sources Division work closely with the Battery Management Office of the Army Materiel Command, which is located in the Logistics and Readiness Directorate of the Communication-Electronics Command (CECOM). We are also closely integrated with the Army Research Office, and the fuel cell personnel of the CECOM Research Development and Engineering Center (RDEC), and the battery personnel of the RDECs for the Tank and Automotive Command and the Missile Command. The six program areas discussed in which the Power Sources Division is engaged are: primary batteries, rechargeable batteries, reserve/fuze batteries, pulse batteries and capacitors, fuel cells, and thermophotovoltaic power generation     

某系列飞机蓄电池组新型自动加温装置的技术研究

航空蓄电池组是我军航空兵部队某系列飞机的地面起动、机载备份应急化学电源。本文分析了我军现役某系列飞机的航空蓄电池组使用状况和温度性能后,揭示了研制稳定高效的蓄电池组自动加温装置的必要性并给出了初步的设计方案。     

Making batteries last longer [for electric vehicles]

The early 1900's era of electric cars ended because the batteries didn't last long enough, and a new gasoline-engine-powered car cost less than a replacement battery. Long-life batteries are the key to achieving a low life-cycle cost for the electric vehicles that will help solve the air-pollution problem in our cities. New ways of making batteries last longer are discussed     

Self-discharge losses in lithium-ion cells

The self-discharge losses in several lithium-ion cell designs have been measured by three different methods. The losses are separated into time-dependent and state-of-charge dependent contributions. For most cycling conditions, the time-dependent self-discharge losses are dominant; however, after several months of stand on open circuit or float charge, the state-of-charge dependent losses become significant. The self-discharge rate has been found to not increase monotonically with state-of-charge, but to drop somewhat at intermediate states of charge. The implications of these measurements for maintaining balanced cell capacities in batteries and establishing optimum storage voltage levels for batteries are discussed.     

Electric vehicles (EVs): `a look behind the scenes'

The author addresses and summarizes some of the broader issues relating to electric vehicles including legislation, regulation, funding, infrastructure, niche markets, safety, and the near-term need for lead-acid batteries. The impact of low emission requirements is examined. The principle hazards associated with lead-acid batteries and the attendant liability issues are identified. Federal safety requirements are discussed in some detail     

Electric-vehicle batteries

Electric vehicles that can't reach trolley wires need batteries. In the early 1900's electric cars disappeared when owners found that replacing the car's worn-out lead-acid battery costs more than a new gasoline-powered car. Most of today's electric cars are still propelled by lead-acid batteries. General Motors in their prototype Impact, for example, used starting-lighting-ignition batteries, which deliver lots of power for demonstrations, but have a life of less than 100 deep discharges. Now promising alternative technology has challenged the world-wide lead miners, refiners, and battery makers into forming a consortium that sponsors research into making better lead-acid batteries. Horizon's new bipolar battery delivered 50 watt-hours per kg (Wh/kg), compared with 20 for ordinary transport-vehicle batteries. The alternatives are delivering from 80 Wh/kg (nickel-metal hydride) up to 200 Wh/kg (zinc-bromine). A Fiat Panda traveled 260 km on a single charge of its zinc-bromine battery. A German 3.5-ton postal truck traveled 300 km with a single charge in its 650-kg (146 Wh/kg) zinc-air battery. Its top speed was 110 km per hour     

Hubble performance on-orbit

A summary of the Hubble Space Telescope (HST) nickel-hydrogen (NiH/sub 2/) battery performance from launch to the present. Over the life of HST vehicle configuration, charge system degradation and failures, together with thermal design limitations, have had a significant effect on the capacity of HST batteries. Changes made to the charge system configuration to protect against power system failures and to maintain battery thermal stability resulted in undercharging of the batteries. This undercharging resulted in decreased usable battery capacity as well as battery cell voltage/capacity divergence. This cell divergence was made evident during on-orbit battery capacity measurements by a relatively shallow slope of the discharge curve following the discharge knee. Early efforts to improve battery performance have been successful. On-orbit capacity measurement data indicates increases in the usable battery capacity of all six batteries as well as improvements in the battery cell voltage/capacity divergence. Additional measures have been implemented to improve battery performance, however, failures within the HST Power Control Unit (PCU) have prevented verification of battery status.     

A nickel/hydrogen battery for PV systems

The nickel-hydrogen battery, developed in the early nineteen-seventies as an energy-storage subsystem for commercial communication satellites, is discussed. The advantages offered by nickel-hydrogen batteries, including long life, low maintenance and high reliability, make it very attractive for terrestrial applications such as stand-alone photovoltaic systems. The major drawback to the wider use of the nickel-hydrogen battery is its high initial cost. A 7-kWh battery has been on test since January 1988 using a flat-plate photovoltaic array for charging. The cell, battery design and test methods are briefly described, and the results of cycling and solar tests are presented. It is concluded that the battery is well suited for remote solar applications     

Performance characteristics of lithium-ion cells for NASA's Mars2001 Lander application

NASA requires lightweight rechargeable batteries for future missions to Mars and the outer planets that are capable of operating over a wide range of temperatures, with high specific energy and energy densities. Due to the attractive performance characteristics, lithium-ion batteries have been identified as the battery chemistry of choice for a number of future applications, including Mars rovers and landers. The Mars 2001 Lander (Mars Surveyor Program MSP 01) will be one of the first missions which will utilize lithium-ion technology. This application will require two lithium-ion batteries, each being 28 V (eight cells), 25 Ah and 8 kg. In addition to the requirement of being able to supply at least 200 cycles and 90 days of operation on the surface of Mars, the battery must be capable of operation (both charge and discharge) at temperatures as low as -20°C. To assess the viability of lithium-ion cells for these applications, a number of performance characterization tests have been performed, including: assessing the room temperature cycle life, low temperature cycle life (-20°C), rate capability as a function of temperature, pulse capability, self-discharge and storage characteristics, as well as mission profile capability. This paper describes the Mars 2001 Lander mission battery requirements and contains results of the cell testing conducted to-date in support of the mission,     

Segmented battery charger for high energy 28 V lithium ion battery

Since they were first introduced in the early 1990s, lithium ion batteries have enjoyed unprecedented growth and success in the consumer marketplace. Combining excellent performance with affordability, they have become the product of choice for portable computers and cellular phones. Building on the same energy and life cycle attributes, which marked their consumer market success, but adding new high power storage capability, lithium ion technology is now poised to play a similar role in the transportation, military, and space sectors. With major program in various aspects of electric and hybrid electric vehicles, Saft has developed a family of battery products that address the power and energy storage where lightweight, long life, and excellent energy or power storage capabilities are needed. Significant progress in the packaging and control of high power, yet compact, batteries has been accomplished for a variety of vehicle applications. This paper discusses the charger and balancing strategies of one of this family of products