Pakistan's space programme

Space research in Pakistan is conducted by the Pakistan Space and Upper Atmosphere Research Commission (Suparco). Suparco's programmes consist of the launching of sounding rockets and satellite applications, especially remote sensing and communications. Its long-term goals are to develop communications and remote sensing satellites and to launch lightweight scientific satellites in near-Earth orbits. To train its scientific staff at postgraduate level, Suparco is establishing an Aerospace Institute. The Commission is very active in international forums such as the UN COPUOS, Cospar, IAF and IUCN.     

Insight-HXMT:China's First X-Ray Astronomical Satellite

The Hard X-ray Modulation Telescope(HXMT) satellite is the first X-ray astronomical satellite in China. Utilizing the "direct demodulation image reconstruction method", HXMT will perform broad band(1-250 keV) survey of large sky areas in scanning mode, which can result in source detection characterized with high sensitivity and spatial resolution. Point observation is another key working mode of HXMT, and is specified for observations of galactic bright sources like X-Ray Binary(XRB) and others. Additionally, HXMT also has a powerful capability developed for monitoring gamma-ray bursts, which is quite unique in the world due to its energy coverage of 200 keV-3 MeV and largest detection area. The HXMT satellite was launched by a Long March 4 B(LM-4 B) rocket from the Jiuquan Satellite Launch Center on June 15, 2017. The payloads onboard HXMT are a High Energy X-ray Telescope(HE), a Medium Energy X-ray Telescope(ME), a Low Energy X-ray Telescope(LE), and a Space Environment Monitor(SEM).This paper introduces the main technical aspects of the satellite, including scientific objectives, technical features, mission design, and system design.     

FPGA-based operational concept and payload data processing for the Flying Laptop satellite

Flying Laptop is the first small satellite developed by the Institute of Space Systems at the Universität Stuttgart. It is a test bed for an on-board computer with a reconfigurable, redundant and self-controlling high computational ability based on the field programmable gate arrays (FPGAs). This Technical Note presents the operational concept and the on-board payload data processing of the satellite. The designed operational concept of Flying Laptop enables the achievement of mission goals such as technical demonstration, scientific Earth observation, and the payload data processing methods. All these capabilities expand its scientific usage and enable new possibilities for real-time applications. Its hierarchical architecture of the operational modes of subsystems and modules are developed in a state-machine diagram and tested by means of MathWorks Simulink-/Stateflow Toolbox. Furthermore, the concept of the on-board payload data processing and its implementation and possible applications are described.     

FPGA-based operational concept and payload data processing for the Flying Laptop satellite

Flying Laptop is the first small satellite developed by the Institute of Space Systems at the Universität Stuttgart. It is a test bed for an on-board computer with a reconfigurable, redundant and self-controlling high computational ability based on the field programmable gate arrays (FPGAs). This Technical Note presents the operational concept and the on-board payload data processing of the satellite. The designed operational concept of Flying Laptop enables the achievement of mission goals such as technical demonstration, scientific Earth observation, and the payload data processing methods. All these capabilities expand its scientific usage and enable new possibilities for real-time applications. Its hierarchical architecture of the operational modes of subsystems and modules are developed in a state-machine diagram and tested by means of MathWorks Simulink-/Stateflow Toolbox. Furthermore, the concept of the on-board payload data processing and its implementation and possible applications are described.     

A systems engineering environment for integrated satellite development

Space mission implementation faces a very dynamic environment with fast-paced information technology advancement and shrinking space budgets. A more focused use of decreasing public investments in space requires a cost reduction over their entire life cycle, up to the end of the useful life of a spacecraft. The anticipation of cost, schedule, risk and performance requirements from all over the product life cycle to the early stages of product development is generally recognised as a necessary condition to reduce life cycle cost. In order to cope with the intrinsic functional complexity of space products, such requirements engineering activity must be performed in a structured way within a systems engineering approach. This paper aims to describe how Cradle, a commercial systems engineering environment software package, can be used for integrated satellite development, taking into consideration functional and life cycle process requirements. Cradle has requirements management, system modelling, performance modelling, configuration management and document generation capabilities integrated in the same environment. Also, the paper provides some examples of application and highlights how Cradle can enhance the satellite development related activities performed by the Brazilian Institute for Space Research (INPE).     

European small geostationary communications satellites

Hispasat Advanced Generation 1 (HAG1) is the first satellite using the SGEO platform, which is under the development in the ESA Artes-11 program. Since the last presentation in the IAC 2007, a European industrial consortium led by OHB has completed the mission and spacecraft design. The platform Preliminary Design Review has been carried out in May 2008. The customer for the first mission is a commercial operator—Hispasat. The contract was signed in December 2008 and the satellite will be launched in 2012. To give confidence to the customer, SGEO platform will use up to date flight proven technologies. HAG1 carries 20/24 Ku-band and 3/5 Ka-band transponders to provide commercial services. Some innovative payload technologies will also be flown on board of HAG1 to gain in-orbit heritage. SGEO has also been selected as the baseline platform for the ESA Data Relay Satellite (EDRS). Phase-A study has just kicked off in January 2009. The targeted launch date is 2013. Heinrich Hertz will also use the SGEO platform. Heinrich Hertz is funded by the German Space Agency (DLR) and provides flight opportunities for technologies and components developed by the German Space Industry. With the HAG1 contract in hand, and EDRS and Heinrich Hertz in the line, OHB with its partners has the confidence that it will be able to speed up the product development of the SGEO platform for potential customers in the commercial market. This paper will first present the updated platform design and the status of the product development will be followed with the introduction of innovative payload technologies on board the first mission—HAG1 and ended with the mission concepts of EDRS and Heinrich Hertz missions.     

LARES successfully launched in orbit: Satellite and mission description

On February 13th 2012, the LARES satellite of the Italian Space Agency (ASI) was launched into orbit with the qualification flight of the new VEGA launcher of the European Space Agency (ESA). The payload was released very accurately in the nominal orbit. The name LARES means LAser RElativity Satellite and summarises the objective of the mission and some characteristics of the satellite. It is, in fact, a mission designed to test Einstein's General Relativity Theory (specifically ‘frame-dragging' and Lense-Thirring effect). The satellite is passive and covered with optical retroreflectors that send back laser pulses to the emitting ground station. This allows accurate positioning of the satellite, which is important for measuring the very small deviations from Galilei–Newton's laws. In 2008, ASI selected the prime industrial contractor for the LARES system with a heavy involvement of the universities in all phases of the programme, from the design to the construction and testing of the satellite and separation system. The data exploitation phase started immediately after the launch under a new contract between ASI and those universities. Tracking of the satellite is provided by the International Laser Ranging Service. Due to its particular design, LARES is the orbiting object with the highest known mean density in the solar system. In this paper, it is shown that this peculiarity makes it the best proof particle ever manufactured. Design aspects, mission objectives and preliminary data analysis will be also presented.     

Structure and thermal control of panel extension satellite (PETSAT)

Panel ExTension SATellite (PETSAT) [S. Nakasuka, Y. Nakamura, Panel extension satellite (PETSAT)—a novel satellite concept consisting of modular, functional and plug-in panels, in: 24th International Symposium on Space Technology and Science, invited talk, 2004-o-2, 2004 [1]] is a satellite which is made of several “functional panels”. Each panel has a special dedicated function and various combinations of different kinds of functional panels enable PETSAT to deal with various mission requirement. Development of PETSAT requires four interface requirements. These are mechanical interface, thermal interface, electrical interface and information interface. In this paper, mechanical interface and thermal interface of PETSAT are especially focused on and introduced. In the development of PETSAT issues about mechanical interface corresponds to panel structure and deployment mechanism. The structure of PETSAT is designed so as to have light weigh, enough space for devices and high stiffness. And deployment system has simple mechanism to avoid vacuum metalizing and improve reliability. On the other hand, approaches for thermal interface [K. Higashi, S. Nakasuka, Y. Sugawara, H. Sahara, K. Koyama, C. Kobayashi, T. Okada, Thermal control of panel extension satellite (PETSAT), in: 25th International Symposium on Space Technology and Science, 2006-j-02, 2006 [2]] are homogenization of temperature within panel and between panels. Homogenization of temperature within panels can be realized by heat lane plate, and that between panels is realized by magnetic fluid loop with magnetic heat pump. These approaches for mechanical and thermal interface are demonstrated in SOHLA-2 [Y. Sugawara, S. Nakasuka, T. Eishima, H. Sahara, Y. Nakamura, K. Koyama, C. Kobayashi, T. Okada, Elemental technologies for realization of panel extension satellite (PETSAT), in: 25th International Symposium on Space Technology and Science, 2006-J-01, 2006 [3]] that is satellite of technology demonstration for PETSAT.     

Optimal reconfiguration maneuvers for spacecraft imaging arrays in multi-body regimes

Upcoming National Aeronautics and Space Administration (NASA) mission concepts include satellite arrays to facilitate imaging and identification of distant planets. These mission scenarios are diverse, including designs such as the terrestrial planet finder-occulter (TPF-O), where a monolithic telescope is aided by a single occulter spacecraft, and the micro-arcsecond X-ray imaging mission (MAXIM), where as many as 16 spacecraft move together to form a space interferometer. Each design, however, requires precise reconfiguration and star tracking in potentially complex dynamic regimes. This paper explores control methods for satellite imaging array reconfiguration in multi-body systems. Specifically, optimal nonlinear control and geometric control methods are derived and compared to the more traditional linear quadratic regulators, as well as input state feedback linearization. These control strategies are implemented and evaluated for the TPF-O mission concept.     

Optimal reconfiguration maneuvers for spacecraft imaging arrays in multi-body regimes

Upcoming National Aeronautics and Space Administration (NASA) mission concepts include satellite arrays to facilitate imaging and identification of distant planets. These mission scenarios are diverse, including designs such as the terrestrial planet finder-occulter (TPF-O), where a monolithic telescope is aided by a single occulter spacecraft, and the micro-arcsecond X-ray imaging mission (MAXIM), where as many as 16 spacecraft move together to form a space interferometer. Each design, however, requires precise reconfiguration and star tracking in potentially complex dynamic regimes. This paper explores control methods for satellite imaging array reconfiguration in multi-body systems. Specifically, optimal nonlinear control and geometric control methods are derived and compared to the more traditional linear quadratic regulators, as well as input state feedback linearization. These control strategies are implemented and evaluated for the TPF-O mission concept.     

Taiwan's second remote sensing satellite

FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.     

A DLR small satellite mission for the investigation of hot spots, vegetation and clouds

Starting from their FIRES proposal [1]the DLR makes a new approach in the design of a small satellite mission dedicated to hot spot detection and evaluation: the BIRD mission. The new approach is characterized by a strict design-to-cost philosophy. A two-channel infrared sensor system in combination with a Wide-Angle Optoelectronic Stereo Scanner (WAOSS) shall be the payload of a small satellite (80kg) considered for piggyback launch. So the launch is not a main cost driver as for other small satellite missions with dedicated launchers. The paper describes the mission objectives, the scientific payload, the spacecraft bus, and the mission architecture of a small satellite mission dedicated to the investigation of hot spots (forest fires, volcanic activities, burning oil wells or coal seams), of vegetation condition and changes and of clouds. The paper represents some results of a phase A study and of the progressing phase B.     

Taiwan's second remote sensing satellite

FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.     

Flight demonstration of formation flying capabilities for future missions (NEAT pathfinder)

PRISMA is a demonstration mission for formation-flying and on-orbit-servicing critical technologies that involves two spacecraft launched in low Earth orbit in June 2010 and still in operation. Funded by the Swedish National Space Board, PRISMA mission has been developed by OHB-Sweden (formerly Swedish Space Corporation) with important contributions from the German Aerospace Centre (DLR/GSOC), the French Space Agency (CNES), and the Technical University of Denmark (DTU). The paper focuses on the last CNES experiment achieved in September 2012 that was devoted to the preparation of future astrometry missions illustrated by the NEAT and µ-NEAT mission concepts. The experiment consisted of performing the type of formation maneuvers required to point the two-satellite axis to a celestial target and maintain it fixed during the observation period. Achieving inertial pointing for a LEO formation represented a new challenge given the numerous constraints from propellant usage to star tracker blinding. The paper presents the experiment objectives in relation with the NEAT/µ-NEAT mission concept, describes its main design features along with the guidance and control algorithms evolutions and discusses the results in terms of performances achieved during the two rehearsals.     

大气环境监测卫星紫外高光谱大气成分探测仪技术发展及应用

大气环境监测卫星是我国民用空间基础设施中长期发展规划中的科研卫星。本文介绍了搭载于该卫星的新一代紫外高光谱大气成分探测仪，通过发展紫外高光谱大幅宽高分辨超光谱成像技术，使紫外谱段高光谱大气观测空间分辨率提升一倍，大幅提升气态污染物监测能力，取得良好的应用效果。     

ST-5微小卫星与星座及其空间飞行验证——为未来微小卫星的空间应用展现广阔前景

美国NASA于2006年3月22日成功发射三颗ST-5微小卫星,并组成星座,用于空间地磁观测。经过90天飞行演示,于6月20日顺利结束。演示验证很成功。卫星重25kg,功率24W具有通常卫星全部功能。卫星多项先进技术在演示中得到肯定,空间观测获得史无前例的数据。为此,文章介绍了ST-5微小卫星的先进技术和设计经验。ST-5将为今后微小卫星空间应用展现广阔前景。     

Human spaceflight and an asteroid redirect mission: Why?

The planning of human spaceflight programmes is an exercise in careful rationing of a scarce and expensive resource. Current NASA plans are to develop the new capability for human-rated launch into space to replace the Space Transportation System (STS), more commonly known as the Space Shuttle, combined with a heavy lift capability, and followed by an eventual Mars mission. As an intermediate step towards Mars, NASA proposes to venture beyond Low Earth Orbit to cis-lunar space to visit a small asteroid which will be captured and moved to lunar orbit by a separate robotic mission. The rationale for this and how to garner support from the scientific community for such an asteroid mission are discussed. Key points that emerge are that a programme usually has greater legitimacy when it emerges from public debate, mostly via a Presidential Commission, a report by the National Research Council or a Decadal Review of science goals etc. Also, human spaceflight missions need to have support from a wide range of interested communities. Accordingly, an outline scientific case for a human visit to an asteroid is made. Further, it is argued here that the scientific interest in an asteroid mission needs to be included early in the planning stages, so that the appropriate capabilities (here the need for drilling cores and carrying equipment to, and returning samples from, the asteroid) can be included.     

EDEN: a payload dedicated to neurovestibular research for Neurolab

The European Space Agency contributes to the Neurolab mission through the delivery of the ESA Developed Elements for Neurolab (EDEN). Those elements include one set supporting the Autonomic Nervous System experiment and one set supporting the Neurovestibular (so-called ATLAS) experiment. This second set is called the Visual and Vestibular Investigation System (VVIS). This paper describes the main characteristics of the VVIS and its various subsystems. The scientific objectives and operational constraints of the ATLAS experiment to be carried out with this equipment during Neurolab are presented to underline the correspondence between the VVIS design and the scientific requirements. Further scientific and technical perspectives for the VVIS, particularly within the scope of the International Space station, are also proposed.