共查询到20条相似文献,搜索用时 78 毫秒
1.
本文介绍了在冲压发动机燃烧室试验中出现的喷嘴环挂火现象,指出了挂火的特点;分析了火对临界推力的影响;对产生挂火的主要原因进行了剖析,提出了尾迹分离流是造成火焰前传的原因;最后列举了解决挂火问题的方法. 相似文献
2.
结合齿轮的实际工作状况,建立了齿轮结构的弹性体动力学模型,进行了弹性动力学分析,得出了齿轮的弹性固有特性; 考虑了弹性支撑轴对齿轮体振动的影响,将其处理为弹性支撑,推导了弹性支撑弹簧刚度的表达式,并在弹性边界条件下,考虑了弹性圆盘对啮合齿响应的影响,建立了齿轮支撑系统的动力模型和轮齿响应计算模型,研究了齿轮支撑系统的固有特性,并与实验结果进行了对比验证; 求解了啮合齿的动力学响应,并进行了模拟仿真。研究表明采用弹性支撑条件进行齿轮支撑系统分析是真实、精确的,为齿轮弹性体的动载荷计算、动态设计和齿轮传动系统的精确动力学研究提供了一种分析方法。 相似文献
3.
4.
5.
以航天器电缆网传统研制模式的局限性为出发点,提出了电缆网全息模型的概念及其通用模型体系,实现了包含全要素设计信息的完整产品数字化定义;基于先"修路"后布线的设计理念,系统地提出了导航式电缆网快速协同设计方法及其相关算法,建立了航天器整器级统一的电缆网络通道"地图",有效增强了电缆网的顶层设计,减少了每束电缆并行设计时路径统筹规划不够和走向不优化的问题;构建了电缆网机电一体化协同模式和面向研制全周期的一体化业务流程,建立了跨型号跨专业的通用模型库、参数库、算法与规则库,完善了电缆网系统级设计和底层数据模型,实现了不同专业间的并行协同;开发了导航式电缆网快速协同设计系统,实现了基于参数驱动的复杂电缆网快速三维布线,提升了设计效率效益,并在以空间站为代表的载人航天型号中开展了应用,为复杂电缆网的研制提供了一种有效方法和手段。 相似文献
6.
7.
利用流体动力润滑理论阐述了挤压膜悬浮平台的可能性,在润滑工况假设方面提出了周期化的思想,在解决非定常雷诺方程时利用了周期化的初始条件,大大减少了非定常雷诺方程的运算量,并提高了收敛速度。最后给出了利用简单的实验装置给予挤压膜悬浮初步验证的方法。 相似文献
8.
9.
10.
含间隙球轴承-转子系统的主共振研究 总被引:1,自引:0,他引:1
为了深刻揭示球轴承-转子系统的共振机理,考虑了重力、装配等因素引起的非对称轴承间隙以及滚珠与滚道之间的Hertz接触,建立了球轴承-转子系统的运动方程,首次应用平均法求得了系统在主共振情况下的解析解,并讨论了系统参数对主共振的影响。根据奇异性理论方法计算得到了系统参数平面上的转迁集,研究了不同参数域内共振解的分岔模式,最后通过数值仿真验证了理论分析的正确性,从而为球轴承-转子系统的振动控制提供了理论依据。 相似文献
11.
有翼高超声速再入飞行器气动设计难点问题 总被引:2,自引:1,他引:2
有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。 相似文献
12.
13.
NING Guo-dong ZHANG Shu-guang FANG Zhen-ping 《中国航空学报》2007,20(1):1-8
A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method. 相似文献
14.
LUO Cheng LIU Hua YANG Jia-ling LIU Kai-xin 《中国航空学报》2007,20(3):230-235
Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks. 相似文献
15.
基于飞机油箱模型形状特征油量测量切片步长选择方法研究 总被引:1,自引:0,他引:1
在分析飞机数字式油量测量过程中目前广泛使用的切片法油量测量原理的基础上,针对现有的定步长切片法无法得到准确、可靠的燃油质量特性数据库的缺陷,结合对飞机油箱模型形状特征的分析,提出了基于飞机油箱模型形状特征的油量测量切片步长选择方法。此方法包括切片步长整体和局部选择两个过程,整体选择以实现相邻两切片平面所夹油箱模型体积近似相等为目的来确定切片步长,以体现油箱模型截面整体变化规律;局部选择以设计切片平面与截面突变平面重合或尽可能接近的方式,突出油箱截面的局部变化特征。实验结果表明:该切片步长选择方法较定步长方法能够建立更为合理、可靠的燃油质量特性数据库,从而提高了油量测量精度。 相似文献
16.
波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面:电子化(e-Enabled)运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境(GCE)。 相似文献
17.
The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow 总被引:1,自引:0,他引:1
This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation. 相似文献
18.
临近空间飞行器测控与信息传输系统频段选择 总被引:7,自引:0,他引:7
临近空间飞行器是高性能信息化武器平台,测控(TT&;C)与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联(ITU)国际标准、高速数传、接收信噪比(SNR)、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。 相似文献
19.
基于弯曲激波压缩系统的高超声速进气道反设计研究进展 总被引:3,自引:0,他引:3
总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。 相似文献