某型发动机加力状态喷口收放异常故障分析及预防

针对某型发动机地面收放喷口检查时加力状态喷口收放异常故障,结合发动机喷口随动系统工作原理,分析了产生故障的原因,通过对故障件的检查,制定了修理预防措施.     

某型发动机加力状态自动退出故障分析与排除

针对某型发动机空中飞行时加力状态自动退出故障,结合发动机喷口随动系统工作原理,分析了产生故障的原因,并进行了排除,通过对故障件的检查,制定了修理预防措施,以防止类似故障再次发生。     

中介机匣典型故障排除及深度修理

航空发动机中介机匣组件因各种故障而需修理或导致报废的现象时有发生。针对发动机中介机匣分流环裂纹掉块、上部衬套磨损松动、弹性环磨损、同心度检测不合格等故障进行分析研究,提出解决措施,制定满足发动机使用要求的合理技术标准和修理方法。在修理技术方法中,采用挖补补焊方法解决分流环裂纹掉块故障;采用极坐标定位与专用模板衬套相结合的方法提高新品衬套加工精度以解决上部衬套更换新品后装配准确性难题;采用装配过盈销钉和扩口工艺以保证零件的堵孔质量等。结果表明:这些修理措施提高了中介机匣零部件的利用率,延长了其使用寿命,降低了发动机修理成本。     

某型发动机滑油消耗量大故障的排除

就某型涡桨发动机滑油消耗量大的故障,以故障树的形式列出了所有可能原因并逐一分析排除,在确定了故障的根本原因后,制定了修理措施并提出了对该故障进行检查及预防的方案,为该型发动机类似故障的修理和日常维护提供参考。     

某型发动机联合漏油收集器修理工艺研究

针对某型发动机联合漏油收集器管接头漏油故障,通过原理分析,找到了引起故障的根本原因,对故障进行了排除,并开展修理工艺研究,确定检查修理方法,为同类故障的排除提供参考。     

某型发动机前机匣下方回油管接头漏油故障原因分析

本文对发动机前机匣及其与回油管的联接结构进行了分析,指出产生前机匣下方漏油故障的三个因素,给出了故障的排除方法以及在发动机修理过程中应采取的六条措施.     

航空发动机环形结构件蜂窝磨损更换修复工艺研究

概述航空发动机蜂窝结构件磨损故障及其特点,针对环形结构的蜂窝更换修理工艺进行了研究,分析了常见蜂窝更换修理质量问题的形成原因,并在实际生产中得到了应用。     

基于单类支持向量机的航空发动机故障检测

通过监控航空发动机性能参数,准确判断发动机的工作状态,预知发动机的异常变化．为预防和排除故障提供充足的时间和决策依据。开发出利用QAR（quick access Feeorder．快速存取记录器）数据的发动机故障检测系统,该系统基于民航发动机的QAR数据,由于发动机正常运行数据容易获取．而故障样本难以获得．因而采用单类支持向量机（OCSVM）,仅依靠发动机的健康数据建立其分类器。利用OCSVM分类器．监控后续航班参数是否出现异常,通过分析检测结果,实现发动机故障检测。采用该系统监控航空发动机性能参数．及时发现发动机运行状态异常,证明了系统的可行性和有效性。     

某型发动机反推门角材断裂故障分析与对策

针对某型发动机反推门角材断裂故障频发问题,从角材断口分析、结构特性、制造工艺、修理方法等方面开展研究,找出故障产生的主要原因,制定了角材裂纹分类修理、更换焊丝材料、3D打印技术自制备件等措施,为该型发动机角材断裂问题提出了新的解决途径。     

浅谈V2500发动机薄壁螺套故障

针对V2500发动机的高压后外机匣采用的薄壁螺套在在翼孔探及进厂修理过程中,经常出现各种失效故障,严重影响发动机的正常使用这一问题,分析了故障原因及可能的故障后果,并针对性的提出了相应的改进方法,最终降低了薄壁螺套的故障率。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

ν-gap度量及其在飞行控制律评估中的应用

 传统控制律评估方法主要用于单输入单输出（SISO）系统，且对模型参数摄动考虑不够全面,针对这些不足，研究了ν-gap度量方法。在介绍系统广义稳定裕度相关概念的基础上，给出了ν-gap度量的定义、特点和性质以及近似摄动模型的计算，提出ν-gap度量评估控制律的步骤。实例结果表明，该方法不仅克服了上述传统评估方法的缺陷，而且还有根据所求的各摄动影响情况忽略影响小的元素，以减少计算量及可以找到最坏情况下的参数摄动组合等优点。     

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Integrated Entry Guidance for Reusable Launch Vehicle

A method for the implementation of integrated three-degree-of-freedom constrained entry guidance for reusable launch vehicle is presented. Given any feasible entry conditions, terminal area energy management interface conditions, and the reference trajectory generated onboard then, the method can generate a longitudinal guidance profile rapidly, featuring linear quadratic regular method and a proportional-integral-derivative tracking law with time-varying gains, which satisfies all the entry corridor constraints and meets the requirements with high precision. Afterwards, by utilizing special features of crossrange parameter, establishing bank-reversal corridor, and determining bank-reversals according to dynamically adjusted method, the algorithm enables the lateral entry guidance system to fly a wide range of missions and provides reliable and good performance in the presence of significant aerodynamic modeling uncertainty. Fast trajectory guidance profiles and simulations with a reusable launch vehicle model for various missions and aerodynamic uncertain-ties are presented to demonstrate the capacity and reliability of this method.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。