结合迁移学习基于全卷积神经网络的ISAR自聚焦算法

逆合成孔径雷达（ISAR）成像目标多为非合作目标，在目标相对运动状态未知情况下的运动补偿是ISAR成像的关键。基于全卷积网络（FCN）具有强大的数据抽象特征挖掘和拟合能力，将FCN用于ISAR自聚焦，提出一种结合迁移学习基于FCN的ISAR自聚焦算法。通过构造大量不同相位误差的仿真数据集并进行训练，使FCN具有相位补偿能力，对不同姿态下仿真以及实测数据进行迁移训练，进一步提升平动相位补偿的能力。实测数据处理结果表明，结合迁移学习基于FCN的自聚焦成像效果优于传统类自聚集算法，验证了所提算法的有效性，相比传统方法更具优越性。     

双基地角时变下的ISAR稀疏孔径自聚焦成像

针对双基地角时变下的逆合成孔径雷达（ISAR）成像分辨率低以及稀疏孔径存在相位误差引起图像散焦等问题,提出了一种基于贝叶斯压缩感知（BCS）的双基地ISAR稀疏孔径自聚焦高分辨成像算法。在平动补偿后回波数据的基础上,首先构造补偿相位将由双基地角时变引起的多普勒偏移补偿掉,然后构造随双基地角变化的稀疏基矩阵,建立基于压缩感知的双基地ISAR稀疏孔径观测模型,并将相位误差作为ISAR成像的模型误差,接着假设目标图像各像元服从Laplace先验、噪声统计特性服从Gaussian分布,利用贝叶斯推理进行"分布式"迭代求解,在高分辨成像的同时实现了相位自聚焦,仿真结果验证了算法的有效性和优越性。     

表面粗糙的复杂目标全极化ISAR图像快速仿真

为了获取基于模板图像的车辆、飞机等复杂目标识别所需的海量高质量逆合成孔径雷达(ISAR)图像,提出了表面粗糙的复杂目标全极化ISAR图像快速仿真方法。该方法预先对车辆和飞机等复杂目标表面粗糙程度进行分级定量描述,并以改进的射线弹跳法和等效边缘流法快速预估来自目标粗糙表面的镜面反射和多次反射贡献以及细分边缘的绕射贡献,经相干叠加获得目标的精确电磁散射数据,最后进行成像处理得到高质量全极化ISAR图像。标准体、飞机和车辆目标的仿真实验结果验证了该方法的准确性和有效性。     

一种弹道导弹多目标时频分析ISAR成像算法及仿真

在研究多目标ISAR成像回波信号的基础上,提出了一种基于谱图重排的时频分析ISAR成像算法,针对同一距离单元内不同径向速度和不同微动状态两种情况的弹道导弹多目标ISAR成像问题进行了新算法的仿真研究。仿真结果表明,这种成像方法具有优良的时频聚焦性能,证明了该方法的有效性。     

基于拖曳式干扰机的ISAR微动散射波干扰方法

通过对微多普勒效应的研究,提出了一种新的逆合成孔径雷达（ISAR）散射波干扰方法。将拖曳式干扰机和ISAR接收机分别等效为双基ISAR的发射站和接收站,干扰机对截获的ISAR信号进行微动信息调制并转发至目标,由其散射至ISAR接收机产生散射波干扰效果。干扰信号经ISAR接收机处理后可在真实目标回波成像结果附近产生假目标,且在方位向形成干扰条带。实验结果表明：通过控制干扰机转发参数及微动调制参数可分别实现不同的压制干扰效果。由于拖曳式干扰机与目标距离较近,干扰信号可获得较大功率,且与真实目标回波相参,可获得ISAR二维脉冲压缩处理增益,与传统射频噪声压制干扰方法相比成本较小。     

稀疏孔径ISAR机动目标成像与相位补偿方法

现代逆合成孔径雷达(ISAR)可实现多模式下对多目标的交替测量工作,但波束切换使得任一目标的方位孔径具有稀疏性,同时目标的机动性也使得目标的方位维信号具有高次调制特性,这均导致以连续采样信号模型为基础的传统ISAR运动补偿和成像方法难以直接应用。本文提出一种新的稀疏孔径(SA)ISAR机动目标相位补偿和成像方法。该方法首先建立了稀疏孔径ISAR机动目标的信号模型,然后通过求解2范数最大化的优化函数,实现对相位误差的精确估计,并且通过迭代处理提高了相位误差的估计精度。相位误差补偿后,根据压缩感知理论,构造了机动目标情况下的Chirp-Fourier字典,通过对稀疏优化问题的求解,能够较精确地从稀疏孔径信号中重构出机动目标的全孔径(FA)信号。仿真和实测数据处理结果证明了本文方法的有效性。     

一次相消技术在雷达成像中的应用

一次相消技术是一种经典的固定点目标对消方法。本文讨论了在ISAR成像处理过程中利用一次相消技术来剔除地杂波,分析了在成像处理中的杂波相消方法,并在最后的计算机仿真中,验证了该方法的有效性,分别比较了两种成像方式、两种地杂波分布的成像结果。     

步进频率单脉冲二维像成像仿真及用于识别的研究

探讨了单脉冲雷达三维成像的原理以及方法.通过计算机仿真,基于实验室实测的目标二维重点散射源图,获取了任意目标的二维像,并和ISAR三维成像作了比较.就二维图形数据的特征提取进行了有意义的探索,提出了一种数据合成的方法,在此基础上经过仿真实验,得到了较为理想的目标识别结果.     

线性调频步进雷达ISAR信号特性及成像

文章在建立了线性调频步进ISAR回波信号模型的基础上,对线性调频步进雷达ISAR信号特性进行了详细的分析,指出了由径向速度和转动速度所引起的耦合项、一次项和二次项对距离合成高分辨和方位聚焦的影响;给出了线性调频步进雷达ISAR成像的详细步骤,并用仿真论证了文章分析的可靠性。     

双基地角时变下的ISAR等效旋转中心估计

双基地逆合成孔径雷达（ISAR）距离-多普勒算法成像时，容易引起越分辨单元徙动问题，影响成像质量，为了抑制越分辨单元徙动，需要估计目标的等效旋转中心。本文针对双基地角时变下的ISAR等效旋转中心估计问题，提出了一种等效旋转中心估计算法。该算法首先将运动补偿后的一维距离像序列分为两组并分别成像，得到两幅图像；其次，假定某个距离单元为等效旋转中心位置，对两幅图像进行畸变校正，使得两幅图像只存在一个视角差，按视角差旋转其中的一幅图像，并与另一幅图像作相关，得到相关系数；然后，假定下一个距离单元为等效旋转中心位置，重复上述步骤，直至遍历结束，相关系数最大值对应的假定位置就是估计的等效旋转中心。最后进行了仿真对比实验，表明本文算法能够有效估计双基地角时变下的ISAR等效旋转中心位置。     

An efficient 3-D near-field ISAR algorithm

This paper presents a new three-dimensional (3-D) near-field inverse synthetic aperture radar (ISAR) imaging technique. A 3-D ISAR image can be obtained by processing coherently the backscattered fields as a function of the frequency and two rotation angles about axes which are mutually orthogonal. Most of the existing ISAR algorithms are based on the Fourier transform and as such can tolerate only small amounts of wavefront curvature. Wavefront curvature must be taken into account when imaging an object in the near-field. Near-field ISAR imaging of large objects using a direct Fourier inversion may result in images which are increasingly unfocused at points which are more distant from the center of rotation. An algorithm based on an azimuth convolution between a near-field focusing function and the frequency domain backscattered fields is discussed. This convolution is efficiently implemented by using fast Fourier transform (FFT) techniques. Furthermore, in order to further alleviate the computational load of the algorithm, the discrete Fourier transform (DFT) of the focusing function is evaluated by means of the stationary phase method. Experimental results show that this technique is precise and virtually impulse invariant     

基于脉冲交错的数字阵列雷达任务优化调度算法

针对数字阵列雷达搜索、跟踪和成像任务的资源调度问题,提出一种数字阵列雷达(DAR)任务的优化调度算法。该算法以脉冲交错技术为基础,在对目标搜索与跟踪的同时,利用基于压缩感知的稀疏孔径认知逆合成孔径雷达(ISAR)成像方法对部分精密跟踪目标成像,并采用观测时间动态调整策略以提高雷达系统的自适应能力。仿真结果表明,与传统雷达资源调度算法相比,该算法可以将成像任务考虑到优化调度模型中并合理分配资源,实现雷达多任务并行的调度,获得更高的资源利用率与期望的成像质量。     

Quantitative SNR analysis for ISAR imaging using jointtime-frequency analysis-Short time Fourier transform

V.C. Chen recently presented an inverse synthetic aperture radar (ISAR) imaging technique using the joint time-frequency analysis (JTFA), which has been shown having a better performance for maneuvering targets over the conventional Fourier transform method. The main reason is because the frequencies of the radar returns of the maneuvering targets are time varying and a JTFA is a technique that is suitable for such signals, in particular a JTFA may concentrate a wideband signal, such as a chirp, while it spreads noise. We quantitatively study the signal-to-noise ratio (SNR) in the ISAR imaging using one of the typical JTFA techniques, namely the short time Fourier transform (STFT). We show that the SNR increases in the joint time-frequency (TF) domain over the one in the time or the frequency domain alone both theoretically and numerically. This quantitatively shows the advantage of the JTFA technique for the ISAR imaging     

Time-frequency approaches to ISAR imaging of maneuvering targetsand their limitations

Inverse synthetic aperture radar (ISAR) imaging of the noncooperative maneuvering target is a challenging task because of its time variant orientation and rotation velocity which cannot be measured accurately. This correspondence investigates the principles of ISAR imaging of maneuvering targets, and proposes an algorithm for application in situations where the maneuverability is not too severe and the Doppler variation of subechoes from scatterers can be approximated as a first-order polynomial. The imaging results obtained by using real data show the effectiveness of the new method     

机动目标的逆合成孔径雷达成像

 逆合成孔径雷达(ISAR)和合成孔径雷达 (SAR)都是利用目标 (场景)与雷达的相对运动,提高横向分辨率,实现对目标 (场景 )的成像。SAR的运动方是雷达平台,可控制作平稳飞行,且用仪器测校其偏离误差;ISAR的运动方通常是非合作目标,运动不受控制,且难以精确测量。当目标作机动飞行时,以目标作固定基准,雷达等效地在空间形成流形复杂的逆合成孔径 (阵列 ),对这种情况下成像的问题进行了系统的研究。     

Imaging of target with complicated motion using ISAR system based on IPHAF-TVA

The technique of imaging a target with a complicated motion using an Inverse Synthetic Aperture Radar (ISAR) system is an effective tool in the field of radar signal processing. After the translational compensation, the received signal reflected from the target can take the form of a multi-component Polynomial Phase Signal (m-PPS), and the high quality ISAR image can be provided via the combination between the estimated parameters of the m-PPS and the Range Instantaneous-Doppler technique (RID). For a target with a high maneuvrability, the occurrence of scatterers Migration Through Resolution Cell (MTRC), caused by the rotational movement could be appearing. That is why the variation in the amplitude of the echo during the time of observation cannot be neglected. The purpose of this study is the parameters estimation of the m-PPS signal with order three in the case of the Time Varying Amplitude (TVA). The Improved-version of the Product High-order Ambiguity Function (IPHAF) with TVA is proposed to improve the quality of the ISAR image compared with traditional techniques based on a constant amplitude; the experimental outcomes confirm that the new IPHAF-TVA method presented in this study is an effective technique to make the ISAR image very clear.