Radar Partial Coherence Theory: An Introduction

The nature of physical phenomena is such that scattering from portions of an object, a number of objects, or clutter, is not completely unrelated; the underlying environment causes some degree of order in the phenomenon. Radar partial coherence theory describes a structure for the general target, or clutter, and its relationship to radar cross section, waveform coding, and the radar output signal. The clutter ambiguity function is introduced for extended bodies and embraces the (Woodward) ambiguity function for a point target. Due to nonlinear effects caused by partial coherence within the general target, radar signals and targets are formulated in terms of mutual coherence functions. The basic quantities describing the radar output are 1) the radar mutual coherence function (formulated in terms of the radar waveform) and 2) the target mutual coherence function which depends upon target properties, physical environment, and viewing aspect. Random noise (independent point scatterers) and partially coherent portions of reflecting bodies are made accountable in the theory. Partial coherence effects are treated as patches of reflected energy: self-coherent energy patches plus mutually coherent energy among the patches.     

Radar Signal Propagation and Detection Through Ice

In this paper we describe the existing and planned radar measurements of the planetary bodies. The dielectric properties of water ice and other potential surface and subsurface materials are discussed, as well as their dependency on temperature and structure. We then evaluate the performance of subsurface sounding radars using these parameters. Finally we describe some laboratory technique to help interpret the radar data, presenting some results obtained using dielectric spectroscopy methods.     

Sensitivity of MIMO STAP Radar with Waveform Diversity

Space-time adaptive processing (STAP) is an effective method adopted in airborne radar to suppress ground clutter. Multiple-input multiple-output (MIMO) radar is a new radar concept and has superiority over conventional radars. Recent proposals have been applying STAP in MIMO configuration to the improvement of the performance of conventional radars. As waveforms transmitted by MIMO radar can be correlated or uncorrelated with each other, this article develops a unified signal model incorporating waveforms for STAP in MIMO radar with waveform diversity. Through this framework, STAP performances are expressed as functions of the waveform covariance matrix (WCM). Then, effects of waveforms can be investigated. The sensitivity, i.e., the maximum range detectable, is shown to be proportional to the maximum eigenvalue of WCM. Both theoretical studies and numerical simulation examples illustrate the waveform effects on the sensitivity of MIMO STAP radar, based on which we can make better trade-off between waveforms to achieve optimal system performance.     

电阻渐变型结构吸波材料的研究与发展

结构吸波材料的发展建立在先进复合材料发展基础之上,融受力与吸波为一体,将新的吸波机制(如电阻片、电路模拟、手征媒质等)引入到结构吸波材料的研制中,可制备全新的结构吸波材料.电阻渐变型结构吸波材料具有优良的电结构可设计性,通过控制材料的类型(电介质或磁)、厚度、损耗系数及阻抗等,能够使雷达吸波材料具有宽频吸收效果,并可根据不同部位选择不同的结构形式,具有广阔的应用前景.     

针对雷达LPI波形验证的目标RCS估算

根据某型雷达低截获概率波形设计的需要,分析了雷达探测目标的高频散射机理,并运用物理光学法、等效电磁流法计算了约定目标在不同姿态下和不同电磁波频率照射下的RCS值,从而为验证雷达波形在能探测到目标情况下的LPI性能提供了支撑。实验结果表明,基于电磁场理论的目标RCS估算方法是研究雷达LPI波形的一种有效工具,方法也适合于其他领域RCS估算的需要。     

噪声调制连续波雷达信号波形射频隐身特性

雷达信号波形的射频(RF)隐身性能是雷达系统能否适应现代战场环境的重要因素,雷达射频隐身信号波形设计是现代雷达系统设计中的重要课题.首先,在介绍随机噪声信号雷达原理的基础上,基于Schleher截获因子阐述了噪声调制连续波雷达信号波形的射频隐身特性.然后,分析了高斯噪声相位和频率调制连续波雷达输出自相关函数和高斯噪声相...     

Analog clutter cancellation algorithms for dynamic range reduction

A technique that effectively reduces the dynamic range of the input signal in a radar receiver prior to digitization is presented. The dynamic range reduction is accomplished through a process that predicts the next radar return signal from the previous return signals, generates a replica waveform, and subtracts this replica waveform from the radar return signal prior to digitization. This process allows the radar return signal to be digitized without distortion by an analog-to-digital converter (ADC) having a limited dynamic range. The full dynamic range of the radar return signal is then restored by adding the replica waveform to the ADC output. Test and evaluation results using both synthetic and recorded radar data demonstrate in excess of a 30-dB reduction in the dynamic range of the signal at the ADC input when strong clutter is present     

微扰法配合网络分析仪测试材料的电磁参数

利用网络分析仪连接矩形谐振腔组成材料电磁参数的微扰法测试系统。并根据谐振腔微扰理论,得到小样品装载在样品托中进行电磁参数测试的复介电常数和复磁导率计算公式。对聚四氟乙烯的电磁参数进行了测试,所得结果较为精确,可重复性好,证明此测试系统测试结果稳定可靠。对本测试装置的误差进行了简要分析,指出该测试装置能够满足一般电介质材料,尤其是吸波材料电磁参数的测试需求。     

Ultra-wideband technology and random signal radar: an ideal combination

Ultra-wideband radar and random signal radar are two types of newly-developed radar systems. This paper introduces the special advantages of the combination of ultra-wideband technology and random signal radar to the international radar community. It shows that these two radar systems have a very close relationship in nature and can gain significant benefits from each other. It can be anticipated that the random signal modulated waveform will open many potential possibilities for the applications of ultra-wideband radar systems to civilian operating environments.     

Impulse radar evaluation of asphalt-covered bridge decks

The use of impulse radar to distinguish between areas of good bridge deck and areas which suffer from one or more different forms of deterioration, including delamination, scaling, and debonding, is reported. The radar signal is also used to measure the thickness of asphalt and concrete cover over reinforcement. These quantities are important in determining the amount of material to be removed when resurfacing a bridge deck. The calibration procedure and interpretation of radar waveforms are discussed in detail     

基于滤波器结构的压缩感知雷达感知矩阵优化

 压缩感知雷达的目标场景恢复性能要求不同目标的反射回波在压缩空间上的互相关性尽可能小。基于该思想,提出了压缩感知雷达感知矩阵优化模型,根据系统参数和任务信息,以降低感知矩阵互相关性为目标,自适应地构造发射波形和测量矩阵,提升系统性能。分别给出了基于滤波器结构的压缩感知雷达发射波形优化、测量矩阵优化以及波形-测量矩阵联合优化算法。仿真结果表明:本文提出的压缩感知雷达感知矩阵优化模型和算法能够有效地提高场景恢复精度。     

Radar Waveform Selection-A Simplified Approach

Radar measurement and resolution performance, as well as target detection in clutter, depend largely on the transmitted waveform. This explains the sizable effort that has gone into studies of radar waveforms, including attempts at the synthesis of optimum waveforms. This paper shows that, despite the unlimited variety of radar signals, waveform selection is a straightforward process. There are only four classes of waveforms, each with distinct resolution properties. When the target environment is analyzed for a particular application, it is rather evident which of these classes will fit the situation best. Choice of the specific waveform within the selected class then is merely a matter of practical implementation. Although the facts used in developing the unified theory of this paper are not new, it is demonstrated that these facts can be combined into an extremely simple theory of waveform design. Much of today's work is guided by past approaches to a particular problem, and when a design is completed there may be a question as to how close to the optimum it is. The theory presented here permits a systematic approach to waveform selection, with the important benefit that the designer knows exactly where and how much he may have deviated from the best design, and why this was done.     

Experimental study on pulse radar target probing in RFS based on interrupted transmitting and receiving

Radar target probing and measurement are challenging tasks for Radio Frequency Simulation (RFS) with pulse radar signal. Due to the long-time duration of pulse radar signal and the limited space of anechoic chamber, the reflected signal returns before pulse radar signal is fully transmitted in RFS. As a consequence, the transmitted and reflected signals are coupled at the receiver. To handle this problem, the Interrupted Transmitting and Receiving (ITR) experiment system is constructed in this paper by dividing the pulse radar signal into sub-pulses. The target echo can be obtained by transmitting and receiving the sub-pulses intermittently. Furthermore, the principles of ITR are discussed and the target probing experiments are performed with the ITR system. It is demonstrated that the ITR system can overcome the coupling between the reflected and transmitted signals. Based on the target probing results, the performance of pulse radar target probing and measurement can be verified in RFS with the ITR system.     

Multipath and ground clutter analysis for a UWB noise radar

An ultrawideband (UWB) random-noise radar operating in the 1-2 GHz frequency band has been developed and field-tested up to a 200 m range at the Environmental Remote Sensing Laboratory (ERSL) of the University of Nebraska. A unique heterodyne correlation technique based on a delayed transmitted waveform using a photonic delay line has been used to inject coherence within this system. The performance of this radar in the presence of ground reflections is investigated analytically and experimentally, and the mitigating effects of UWB waveform on multipath-induced interference are analyzed. In addition, the ground clutter statistics, in a look-down mode, are theoretically established and experimentally verified. The performance of this radar in detecting clutter embedded targets with small radar cross section (RCS) is also experimentally examined.     

基于OTR和SHT的射频隐身雷达信号设计

为了提高雷达的射频(RF)隐身性能,结合最优匹配照射-接收机(OTR)理论与序贯假设检验(SHT)方法,提出了一种新的射频隐身雷达信号设计方法。通过发射信号了解外界环境信息,然后反馈这些信息给雷达系统,系统根据这些信息自适应设计雷达发射信号,形成一个闭环系统。以雷达目标识别为具体应用,实验仿真表明,设计的雷达信号自适应变化,减小了信号间的相关性,并且减少了照射次数,降低了辐射功率,从而实现了雷达系统的射频隐身性能。     

频率步进雷达数字信号处理

综述了频率步进雷达系统设计与信息处理中的主要问题,包括系统参数设计、目标抽取算法、与Chirp子脉冲的兼容性、与圆锥扫描体制的兼容性等等,并论述了不同情况下多普勒效应的影响及其解决方法,提出了相应的数字信号处理方案。     

Multifrequency Imaging of Radar Turntable Data

In recent years synthetic-aperture radars (SAR) have proven to be very useful two-dimensional imaging tools in various fields. Based on the synthetic-aperture concepts, different imaging modes are possibe with various operating characteristics. We describe a special case where circular-projection radar data are coherently processed to yield both azimuth and range resoultion. Experiments are performed using data obtained from the radar target scatter site (RAT SCAT) radar cross-section facility. Fairly good results are obtained which illustrate the versatility of coherent syntheticaperture processing of pulse-to-pulse high-range-resolution radar returns. A discrete multifrequency stepped and pulsed waveform is the basic transmitted signal from which range-Doppler images are generated. The RAT SCAT turntable facility allows interesting model targets to be illuminated from which radar images can then be computed. One such application of the processing is described.     

Group-Complementary Array Coding for Radar Clutter Rejection

A radar waveform design technique which utilizes Lagrange's method of multipliers to control temporal sidelobes and to reduce Doppler sidelobes is described. This classical method of constrained optimization is applied to the problem of synthesizing a radar wave-form where mismatch loss is the objective function to be minimized. The associated constraints are taken from expressions for the composite temporal sidelobes of the cross-correlation response and the peak correlation response where sets of code words are used to modulate a series of radar pulses. The resulting code sets and receiver reference sets are called group-complementary and produce a trench parallel to or on the range axis of the cross-ambiguity surface.     

多目标规划方法在隐身涂层设计中的应用

根据多层吸波层材料电磁波反射系数的传输线理论，通过建立涂层材料的介电及磁性参数数据库、采用多目标规划法，进行各层材料的选择及层厚的优化设计，为多层隐身涂层材料的研制提供强有力的设计工具。该研究开发的软件具有吸波材料参数数据库、全面搜索优化、部分选定优化、特定结构反射系数计算等功能。最大可分5个波段设定不同的设计指标，最大设计层数为6层。     

蜂窝结构吸波材料等效电磁参数的计算

用介质波导理论导出了蜂窝结构吸波材料的特征方程;数值计算了蜂窝结构中电磁波传播常数及其等效介电常数与等效磁导率。其主模的传播常数是介于芯与壁单质平面波的传播常数之间,等效电磁参数具有色散特性。