共查询到16条相似文献,搜索用时 133 毫秒
1.
2.
深空探测领域对实时性要求较高,在较短时间内找到规划解是深空探测自主任务规划中的一个要求,运用启发式规划算法是达到该要求的方法之一。而深空探测自主任务规划的另外一个特点是需要处理持续动作和数值信息。针对深空探测任务特点,采用规划领域定义语言PDDL,建立深空探测领域中知识模型,描述操作中遇到的时间与资源约束;随后应用以条件数为代价的启发式搜索方法对深空探测规划问题进行求解,并将其与TFD规划器中以动作时间为代价的上下文增强累加启发式搜索方法得到的结果进行对比,得出以条件数为代价的启发式搜索方法在搜索速度方面效果更佳,满足深空探测自主规划任务实时性要求。 相似文献
3.
4.
针对从月球停泊轨道出发直接再入大气的月地转移轨道设计问题,提出了一种数值求解算法。该算法由初值设计和精确解求解两部分组成。首先,根据轨道设计的相应约束,采用伪状态理论,通过简单迭代求解高精度的初值。然后,考虑精确的动力学模型,通过数值积分计算真实轨道和状态转移矩阵,并利用微分修正方法搜索精确解。该算法通过设计高精度的初值,降低了月地转移轨道的设计难度。数值仿真表明:该算法求解效率高,具有良好的鲁棒性。 相似文献
5.
车辆定位与导航系统中的快速路径规划算法 总被引:16,自引:0,他引:16
针对车辆定位与导航系统中的最优路径规划问题,研究了最短路径搜索算法的快速实现技术,并提出了一种启发式快速最优路径规划算法.在分析经典迪杰斯特拉最短路径搜索算法的最优实现的基础上,引入基数堆结构缩减了算法的时间复杂度,再利用启发式搜索和地图分级搜索技术减小搜索空间,从而获得最短路径规划算法的高效率实现.仿真试验的结果证明了该算法的优异性能. 相似文献
6.
7.
8.
针对小天体探测存在显著通讯延迟、任务执行效率低等问题,梳理了小天体探测智能规划需求,面向自主绕飞任务开展了智能规划研究。首先将该问题分解为平台任务智能规划和载荷任务智能规划两部分。针对平台任务智能规划问题,基于PDDL语言设计了探测器自主管理知识模型,提出了基于状态时间线扩展的求解算法;针对任务智能规划问题,建立了基于CSP问题的智能规划数学模型,提出了基于遗传策略的求解算法。最后开发了仿真系统进行算法验证。仿真结果表明:该方法可综合平台与载荷需求,在存储、能源、通信等多种约束条件下,对绕飞探测任务进行统一的任务规划,并得到指令序列和动作序列,能够提高任务管控的智能化程度,降低任务操作的复杂性。 相似文献
9.
针对海洋一号卫星观测任务规划需求,提出并实现了基于遗传策略的任务规划框架,解决了卫星实际使用中成像任务受卫星其他业务影响的多类型约束成像规划问题。基于海洋一号卫星实际规划业务要求,对任务规划约束和优化目标建立数学模型,提出了由预处理、窗口约束处理和组合约束处理与优化组成的三阶段规划框架。设计了多约束任务规划优化目标函数,并利用交叉、变异和种群选择等遗传机制对优化问题进行了求解。基于海洋一号卫星实际观测需求数据,对提出的算法进行了有效性和性能验证,结果表明本算法能够给出满足多类型约束的观测规划方案,并在观测时间、观测覆盖率等方面较其他策略有显著提升。研究结果表明通过优化目标函数的设计遗传算法能够实现复杂约束条件的成像规划求解,算法框架可为与海洋卫星具有相似业务特点的对地观测规划系统设计提供借鉴。 相似文献
10.
基于图像骨架和贪婪算法的无人机航路规划 总被引:2,自引:2,他引:0
针对无人机在执行低空突防任务时最大生存概率以及自身飞行约束的要求,对传统的人工势场法进行改进,提出基于图像骨架和贪婪算法的航路规划方法.对可飞区域提取图像骨架生成赋权图,采用Dijkstra方法搜索最小代价路径实现航路初规划;提出了曲率可控的贪婪算法对初规划结果进行优化,使最终的路径同时满足最小转弯半径和最短航程的要求.仿真结果表明该方法是一种有效的航路规划方法. 相似文献
11.
Yaen Xie Xiande Wu Takaya Inamori Zhen Shi Xinzhu Sun Hongtao Cui 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2019,63(3):1147-1160
This paper presents a trajectory planning algorithm for a space robot with dual-manipulators. Here one manipulator of the space robot captures a target, and another manipulator is free. In this case, this study uses one manipulator as the mission manipulator to capture the target, and another as the balance manipulator aiming at the compensation of the pose disturbance. For this method, a novel trajectory planning algorithm applied to the balance manipulator is presented. The trajectory planning problem is transformed into series of problems of the optimal state solution, and then the iterative algorithms for the trajectory planning are designed. In the iterative algorithms, the bias force on the spacecraft base caused by the balance manipulator is used as the compensation force. Then, to calculate the expected compensation force and torque, a pose control law for the spacecraft base is introduced. The expected compensation force and torque provide equality constraints for optimization problems, which implies that the trajectory planning algorithm compensates for not only the disturbance generated by the manipulator’s motion, but also environmental disturbances. This is because the expected compensation force and torque depend on the pose change of the spacecraft base rather than the type of the disturbance. Numerical simulation was carried out to analyze the proposed trajectory planning method. It was observed that the method greatly reduces the disturbance of Manipulator A on the spacecraft base. These results validated the effectiveness of the proposed method for the trajectory planning to make the spacecraft base disturbance up to minimum. 相似文献
12.
13.
《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2020,65(10):2424-2434
This paper investigates a novel reliable feedback motion planning algorithm for steering a spacecraft to the desired position while satisfying dynamics and environmental constraints, such as actuator constraints, unexpected state constraints, bounded disturbances, etc. The proposed algorithm, termed safeRRT1, applies positively invariant (PI) set transitions to an online sampling approach based on the asymptotically optimal rapidly-exploring random tree (RRT1). A time-varying safe corridor is generated which consists of a sequence of PI sets under the instantaneous constraints. A spacecraft is guaranteed to remain within the corridor when the feedback controllers corresponding to the PI set transitions are executed. Simulations of the spacecraft avoiding obstacles validate the feasibility and effectiveness of the proposed safeRRT1 algorithm. 相似文献
14.
针对机械臂规划方法无法满足CE-3巡视器成像及探测光照约束、避碰及机械臂位形切换次数等约束的不足,提出一种基于SA*的月面巡视器机械臂就位探测任务规划算法。该算法在机械臂的工作空间进行搜索,根据星历计算太阳光照以解决光照约束,通过层次包围盒高效准确地进行机械臂碰撞检测以满足机械臂与环境不存在干涉的约束条件,通过相邻运动行为的代价削减保证规划后机械臂位形切换次数最少。最终通过月面巡视器在轨任务结果验证该算法的可行性。 相似文献
15.