Measurement of Distributed Targets with the Random Signal Radar

A model of a distributed target as a collection of independent, Poisson distributed point scatterers or scattering centers in a range-velocity target space is introduced and is characterized by a deterministic function called the ?scatterer density function.? This function is the density of the point scatterers in the range-velocity space and can be estimated in a relatively straightforward manner by any radar having adequate resolution in both range and velocity and no ambiguities in the region occupied by the distributed target. The use of the random signal radar with a correlator receiver is considered here and the statistical properties of the correlator output, when the return signal is from a distributed target, are derived. It is shown that the spectral density is simply related to the scatterer density function. The technique is illustrated by an example in which the target is a tornado modeled as a cylinder with constant angular velocity. The example suggests that is a possible to remotely estimate the radar cross section per unit volume as a function of distance from the center of the tornado.     

雷击建筑物时防雷系统中雷电流的分布研究

主要讨论雷直击建筑物时雷电流在防雷系统中的分布特性，介绍利用计算机进行数值计算的方法。通过典型算例、传统的电磁暂态计算程序——EMTP的计算结果和利用清华大学高压实验室的冲击大电流发生装置，对此结构模型进行模拟试验，将3种结果进行比较，从而验证了本研究所编制的计算机程序的正确性。为进一步研究室内电磁场的暂态分析做好基础。     

60 GHz FM-CWR Using NRD guide for distance estimation

An FM-CW radar front-end was fabricated in an integrated manner at 60 GHz by using the NRD guide. The main emphasis was placed on compactness in size and high-precise operation in performance. The fabricated radar consists of an FM Gunn oscillator, a balanced mixer, and a planar antenna fed by a leaky NRD guide with a mechanically beam-scanning performance. All circuit components and the antenna were contained in a compact housing of 170 x 140 mm in area and 25 mm in thickness, and thus, a thin type of millimeter-wave radar front-end was successfully developed. Moreover, an error of distance estimation was measured to be less than a distance of 0.7 m.     

直升机燃油系统地面模拟试验中试验台转角与油面角的关系

为了在直升机燃油系统地面模拟试验中准确地模拟油面角，本文介绍了试验台转角与油面角的关系，并给出了转换结果，同时，提出了一种用油箱内增压来模拟过载的设想，使在模拟试验时，油泵供油更趋真实，通过简化计算，给出了确定气压力的方法和判断依据。     

Determination of a suitable set of loss models for centrifugal compressor performance prediction

Performance prediction in preliminary design stages of several turbomachinery components is a critical task in order to bring the design processes of these devices to a successful conclusion.In this paper,a review and analysis of the major loss mechanisms and loss models,used to determine the efficiency of a single stage centrifugal compressor,and a subsequent examination to determine an appropriate loss correlation set for estimating the isentropic efficiency in preliminary design stages of centrifugal compressors,were developed.Several semi-empirical correlations,commonly used to predict the efficiency of centrifugal compressors,were implemented in FORTRAN code and then were compared with experimental results in order to establish a loss correlation set to determine,with good approximation,the isentropic efficiency of single stage compressor.The aim of this study is to provide a suitable loss correlation set for determining the isentropic efficiency of a single stage centrifugal compressor,because,with a large amount of loss mechanisms and correlations available in the literature,it is difficult to ascertain how many and which correlations to employ for the correct prediction of the efficiency in the preliminary stage design of a centrifugal compressor.As a result of this study,a set of correlations composed by nine loss mechanisms for single stage centrifugal compressors,conformed by a rotor and a diffuser,are specified.     

最小成本加快法中的优化组合方案定理及其计算机程序

本文提出了最小成本加快法中寻找多关键路线情况下的组合压缩方案的方法,并用图论中有关割集的理论进行了论证,得到了优化组合方案定理。该定理指出:在由网络计划图中的关键路线构成的子图中,如果每项作业都允许压缩或放宽作业时间,则其最小费用率完全割集中的每个正向割弧(作业)压缩单位时间,每个反向割弧(作业)放宽单位时间,则总工期以最低成本压缩单位时间。文中详细介绍了这种算法。     

Global communication using a constellation of low Earth meridianorbits

The concept of meridian orbits is briefly reviewed. It is shown that, if a satellite in the meridian orbit makes an odd number (>1) of revolutions per day, then the satellite passes over the same set of meridians twice a day. Satellites in such orbits pass over the same portion of the sky twice a day and every day. This enables a user to adopt a programmed mode of tracking, thereby avoiding a computational facility for orbit prediction, look angle generation, and auto tracking. A constellation of 38 or more satellites placed in a 1200-km altitude circular orbit is favorable for global communications due to various factors. It is shown that appropriate phasing in right ascension of the ascending node and mean anomaly results in a constellation wherein each satellite appears over the user's horizon one satellite after another. Visibility and coverage plots are provided to verify the continuous coverage     

涡轮级轮缘封严内非定常流场的准三维LDV测量

研究涡轮级封严内流动和主流的相互作用、相互影响,进一步认识盘腔内燃气入侵等非定常现象,急需流场实验数据验证。针对轮缘封严内空间狭窄、光路安排困难等问题,本文发展了一种用于测量涡轮级轮缘封严内非定常流场的准三维LDV技术,即测量分两步,首先在机匣上安置二维测速系统用符合方式测出径向、切向速度及湍流度,再在轮毂内安置一维探头重复测量,从两次测量数据中计算出轴向速度;该技术借助锁相采样等技术能测出不同动静叶相对位置情况下封严及盘腔内的周期性非定常流场细节,本文给出了部分典型的动态流场测量结果。      

液体射流喷入横向气流混合特性研究进展简

 随着低污染燃烧技术的发展,液体射流在横向亚声气流中的液雾混合特性越来越受到关注。因此对液体射流在横向亚声气流中的研究进展进行了综述,综述内容主要包括3个方面：液体射流在横向气流中雾化破碎;液体射流的穿透深度;液雾在横向气流中的散布和输运。大部分研究工作是针对单个直射式液体射流喷入均匀横向气流中的,也有研究考察了燃油脉动、气流不均匀或者旋转气流条件下射流在横向气流中的混合特性,然而对多喷射点或气动雾化直射式喷嘴形成的液雾在横向气流中的混合特性的研究工作开展的相对较少。最后对液体射流在横向气流中的国内外试验研究工作进行了简要的概括。通过对国内外相关研究进展的概括,并且以先进航空发动机低排放燃烧室中的雾化方式为背景,提出了液体横向射流混合特性研究应进一步完善的工作内容。     

Distance estimation at 60 GHz

An FM-CW radar front-end was fabricated in an integrated manner at 60 GHz by using the NRD guide. Main emphasis was placed on compactness in size and high-precise operation in performance. The fabricated radar consists of an FM Gunn oscillator, a balanced mixer, and a planar antenna fed by leaky NRD guide with a mechanically beam-scanning performance. All circuit components and the antenna were contained in a compact housing of 170 /spl times/ 140 mm in area and 25 mm in thickness, and thus, a thin type of millimeter-wave radar front-end was successfully developed. Moreover, an error of distance estimation was measured to be less than a distance of 0.7 m.     

An automated approach to calculating the maximum diameters of multiple cutters and their paths for sectional milling of centrifugal impellers on a 4?-axis CNC machine

Power generators and chemical engineering compressors include heavy and large centrifugal impellers. To produce these impellers in high-speed machining, a 4?-axis milling machine(or a 4-axis machine plus an indexing table) is often used in the industry, which is more rigid than a5-axis milling machine. Since impeller blades are designed with complex B-spline surfaces and impeller channels spaces vary significantly, it is more efficient to use multiple cutters as large as possible to cut a channel in sections and a blade surface in patches, instead of only using a small cutter to machine a whole blade and a channel. Unfortunately, no approach has been established to automatically calculate the largest diameters of cutters and their paths, which include the indexing table angles. To address this problem, an automated and optimization approach is proposed. Based on the structure of a 4?-axis machine, a geometric model for a cutter gouging/interfering the impeller is formulated, and an optimization model of the cutter diameter in terms of the indexing table angle is established at a cutter contact(CC) point on a blade surface. Then, the diameters of the tools,their orientations, and the indexing table angles are optimized, and each tool's paths are generated for machining its corresponding impeller section. As a test, an impeller is efficiently machined with these tools section by section; thus, this approach is valid. It can be directly used in the industry to improve efficiency of machining centrifugal impellers.     

大弯度可控扩散叶型叶栅槽道中气体流动的试验研究

本文对一种大弯度可控扩散叶型叶栅槽道和栅后流场进行了测量 ,并对端壁和叶片表面进行了流动显示。通过研究 ,对叶栅槽道特别是端部气体流动 ,旋涡结构以及二次流影响有深入的了解。本文的工作对于改进压气机端部流动条件 ,发展第二代可控扩散叶型有重要的实际意义。     

旋涡运动与湍流模型

本文力图将熟知的湍流大涡运动现象与湍流模型理论联系起来以减少模型理论中的经验关系。 在剪切流中以球的流体动力系数,分析确定了涡球的运动,并以此确定剪切流中的湍流剪应力。由此得到了一个二方程模型,方程中仅包含球的流体动力系数。 平板湍流边界层的实例计算表明,计算的速度剖面在整个边界层中都能很好地与实验符合。     

Protostellar Disk Formation and Early Evolution

This contribution describes the formation of circumstellar disks and their earliest evolutionary phases when self-gravity in the disk plays a crucial role in eliciting the transport of mass and angular momentum. We first discuss the formation of protostellar disks within the context of analytic infall-collapse solutions. We then discuss our efforts to understand the behavior of the newly formed disks. Our specific approach consists of performing a detailed analysis of a simplified model disk which is susceptible to the growth of a spiral instability. Using a combination of numerical simulation and semi-analytic analysis, we show how the dramatic early phase of mass and angular momentum transport in the disk can be explained by a second-order nonlinear process involving self-interaction of a dominant two-armed spiral mode. This revised version was published online in June 2006 with corrections to the Cover Date.     

半虚拟现实座舱中基于最大后验概率框架的手姿态估计

手姿态估计是半虚拟现实(SVR)座舱环境中进行人机交互(HCI)的基础工作,为此提出一种基于最大后验概率(MAP)框架的手姿态估计方法.针对手部自遮挡问题,建立多视点手势特征树,通过树节点搜索实现手姿态参数的快速估计,并利用时序信息提高估计精度.在树节点搜索过程中,采用改进的局部敏感哈希(LSH)索引算法提高搜索效率....     

含胶层复合材料梁构件性能分析

复合材料剪切模量通常比弹性模量低1个数量级,这就导致复合材料梁结构剪切效应比普通梁结构显著得多,尤其是梁截面高度较大的情况。作为夹胶玻璃等结构的复合材料支撑框架,复合材料方管梁翼缘通常存在较弱的胶层,此时复合材料梁横截面包含不同剪切模量的材料层,这就导致梁横截面在剪切作用下发生复杂的翘曲。剪切翘曲效应对梁结构的性能有着极大的影响,本文在分段线性位移场假设基础上,推导了对称面内变形的方管梁结构静力以及自振周期计算模型,并同经典梁理论计算结果进行对比,分析了梁几何参数、胶层力学参数等因素对两个模型计算误差的影响。计算结果表明,当胶层较弱时,弱层带来的层间剪切效应对梁的性能有着决定性的影响,此时经典梁理论不再适用。     

无隙锥形旋流器燃烧室中流场分叉现象成因的探讨

本文以实验为依据, 结合分析和推理, 对在无隙锥形旋流器燃烧室中发生的流场分叉现象的成因进行了初步探讨。      

Implications of day temperature variation for an aero-engine's HP turbine-blade's creep life-consumption

Some in-service deterioration in any mechanical device, such as an aero-engine, is inevitable. Also in a country like Pakistan, there is a significant variation of day temperature over the year. As a result of experiencing deterioration (of the engine as a whole or any of its components individually) and/or any alteration in the conditions (such as day temperature) of incoming air stream, an engine will seek a different steady operating point thereby resulting in a variation of the spool speeds and/or turbine-entry temperatures in order to provide the same thrust. Rises in the turbine entry-temperatures and spool speeds result in greater rates of creep and fatigue damage being incurred by the hot-end components and thereby higher engine's life cycle costs.Possessing a better knowledge of the impacts of day temperature variation upon the creep life-consumption of aero-engine's hot-end components, helps the users to take wiser management-decisions. For a military aircraft's mission-profile, using a bespoke computer simulation, the implications of day temperature variation for a turbofan aero-engine's high pressure turbine-blade's creep life-consumption have been predicted.     

ATC计算机系统的地线系统及机房防火措施

在计算机系统的接地系统中,一些问题至今尚无定论,本文结合几个计算机系统安装调试的经验,及现有的ATC雷达模拟系统实体,就机房屏蔽地线、防雷击地线、交流地线、系统地线给予介绍和简单的论述,并给出一些经验值,还说明了直流地悬空的危害和地桩的埋设方法。另外,简要介绍了机房的防火设施,以便有关单位参考。     

简约--当代设计缘起缘落处

在诸设计领域中，现代设计语言越来越显著地趋向于简约。而简约风格。源于上世纪60年代当代美国一个艺术流派兴起的一种非写实绘两雕塑。其主张利用有限的资讯传达耐人寻味的意味，可以于纷乱之中保持清晰的脉络。更能在观者的记忆里提供精炼的索引信号，给人留下深刻整体印象。故此，如今它成为了一种时尚潮流。一种文化倾向，一种艺术家理想主义的探索，一种美学定义的哲学教育，乃至一个绿色设计的终极体现。它是一种被设计师在过去、现在、乃至将来的若干年中不断提及的现象。它被应用在当代设计中，成为一种时尚的思想方法和设计方法。