特征结构配置法及其在飞行控制系统设计中的应用

 本文研究了状态反馈系统的特征结构配置（Eigenstructure Assignment）问题。文中提出了配置具有多重特征值及复共轭特征值的特征结构的算法。并以某飞行控制系统的设计为例说明了算法的应用;最后还给出了设计方案的数字～模拟计算机仿真实验结果。     

直接力控制的特征结构配置法

以现代控制理论和飞行力学原理为基础，针对直接力控制器设计中存在的模态耦合问题，提出一种应用状态反特征结构配置进行解耦的方法，并出相应的公式。分析表明，用此方法对系统的极点和特征向量可以进行希望的配置。并能达到设计要求，同时仿真结果说明，用状态反馈特征结构配置法设计的控制系统比用线性二次型调节器（LQR）方法设计的控制系统解耦性能好，响应速度快，并且解决了输出反馈特征结构配置不能确保闭环系统稳定的问题。     

Eigenstructure Assignment for Linear Systems

The use of feedback (full state, output, and constrained output) is considered as a means of shaping the transient response of linear time invariant systems. The underlying importance of the eigenstructure (eigenvalues/eigenvectors) is highlighted. Also, the important results and techniques are presented along with a brief literature review. An extensive flight control example is presented which should give direction to the application of eigenstructure assignment in diverse areas.     

无人机着陆控制的特征结构配置方法实现

针对无人机纵向着陆系统的控制需求,采用特征结构配置方法的设计方案。阐述了全状态反馈理论基础上的特征结构配置的原理以及根据设计指标确定特征结构配置的方法,并对某型无人机纵向飞控系统动态响应进行分析,给出仿真实例。仿真结果表明,应用特征结构配置方法设计出的控制器,能够使飞机准确地跟踪期望轨迹,满足系统动态性能要求。在工程中具有一定的实用价值     

侧向自动着舰引导控制L1自适应设计

针对具有不确定性及外部干扰的着舰轨迹精确跟踪控制问题,提出了一种对侧向自动着舰引导控制内外回路进行综合化设计的方法.使用特征结构配置实现侧向模态解耦跟踪控制,同时设计L1自适应控制器以补偿系统由于不确定性、舵面故障、舰尾流干扰带来的不利影响,将其应用到侧向自动着舰控制系统.仿真结果表明,对内外回路进行综合设计的着舰引导控制律具有抑制不确定性及干扰的能力,能够实现对侧向自动着舰轨迹的精确跟踪控制.     

Design of a modern pitch pointing control system

The development of a pitch pointing control system for an advanced high performance fighter aircraft using eigenstructure assignment and command generator tracking schemes is presented. A desired eigenstructure is first chosen to achieve a desired decoupling (i.e., pitch attitude and flight path angle), and to obtain a desired damping and rise time. The command generator tracker is next used to ensure zero steady-state error-to-step commands. The stability robustness to the parameter variations of the closed-loop system is evaluated in the sense of the conditioning of the achieved eigenstructure by using singular value analysis technique. The analysis and synthesis techniques for the pitch pointing control system are illustrated by applying the techniques to F-15 aircraft as a part of the NASA/USAF program named ACTIVE (Advanced Controls for integrated Vehicles)     

Multimodel eigenstructure assignment in flight-control design

This paper presents a control design approach based on eigenstructure assignment by dynamic feedback. The proposed method permits the designer to handle simultaneously robustness against real parameter variations (from a multimodel point of view) and the use of structured gain including, as a special case, scheduled gains. Furthermore, given a feedback gain, it is possible to re-design it by eigenstructure assignment by re-assigning its leading eigenstructure. This technique has two advantages. First, it can be viewed as an efficient controller order reduction, second, the design methodology can be initialized, for example, by H_∞- or μ-synthesis which makes it possible to combine the advantages of techniques of different natures. The proposed method alternates multimodel design and μ-analysis but apart from these natural iterations, only algebraic computation is involved.     

基于输出反馈的飞控系数重构控制

针对一类线性控制系统,运用基于输出反馈的特征结构配置方法,提出了一种稳定而有效的控制系统重构方法,根据输出反馈特征值配置原理,给出了原不系统牲结构的确定方法和故障后系统的重构方法与步骤,通过对某飞机纵向飞行控制系统的仿真表明所提出的方法既能保证重构后闭环系统的稳定性,又性使系统性能得到最大可能的恢复。     

多模型切换控制及其在BTT导弹设计中的应用

研究了一类可以抑制切换时刻输出跳跃的多模型切换控制器的设计问题。基于参数化特征结构配置结果及模型跟踪方法,设计了满足输出跟踪性能并使多模型系统中各闭环子系统渐近稳定的多模型切换控制律集合。充分利用参数化特征结构配置方法提供的全部自由度,协调选取各子系统控制律中的参数来抑制切换时刻的输出跳跃。将本文提出的方法应用到某型倾斜转弯导弹自动驾驶仪设计中,仿真结果表明导弹的输出过载迅速准确跟踪制导指令,并且切换抖动得到有效抑制。     

BTT导弹的抖动抑制多模型切换控制

 基于线性系统特征结构配置和模型跟踪方法,以及优化工具,提出了可以有效抑制抖动的多模型切换控制策略,并用该策略设计了 BTT导弹俯仰 /偏航通道的自动驾驶仪。在导弹的整个飞行轨道上选取了若干点,分别建立起描述 BTT导弹俯仰 /偏航运动的线性时不变数学模型。对各个线性时不变模型,分别用特征结构配置方法设计反馈控制器对系统进行镇定。为了使导弹过载跟踪制导指令,又基于模型跟踪方法设计了前馈控制器。当导弹跨越不同特征点区域时,控制器要进行切换。为了减小切换时的抖动,针对切换后的特征结构配置反馈控制器,利用优化工具合理选取其自由度。仿真结果表明,所提出的方法令导弹的输出过载准确跟踪制导指令,而且切换抖动得到有效抑制。     

飞机对大气扰动的变结构控制

随机紊流、离散突风和风切变等,提出了具有鲁棒特性的变结构控制律,实例计算说明了该控制方法的有效性及可行性。     

基于LMI的多目标特征结构配置方法及应用

提出了将线性矩阵不等式（LMI）技术用于多目标特征结构配置的控制器设计方法。由于利用状态反馈或输出反馈进行特征结构配置时存在一些设计裕度,这些裕度可以用来满足附加的性能指标要求。本文利用LMI技术实现了降低系统参数对摄动的灵敏度同时改善系统的鲁棒稳定性的特征结构配置，为特征结构配置方法的实现提供了一条新的途径。设计实例的仿真结果表明了该方法的有效性。     

抗垂风干扰直接升力控制系统设计

一、引言 在垂风干扰作用下,常规飞机往往不能保持航迹角不变,从而使得航迹变化越来越大,这在很多情况下是不符合飞机飞行要求的。而直接升力控制系统,由于实现了对应状态的解耦,在垂风干扰作用下,则可以基本保持航迹角不变。如果采用抗干扰调节器设计方法设计直接升力控制系统,则可以始终保持航迹角为0,从而保证航迹不变。本文以某型飞机为背景讨论了上述问题。采用离散域直接设计。     

抗垂风干扰直接升力控制系统设计

 一、引言 在垂风干扰作用下,常规飞机往往不能保持航迹角不变,从而使得航迹变化越来越大,这在很多情况下是不符合飞机飞行要求的。而直接升力控制系统,由于实现了对应状态的解耦,在垂风干扰作用下,则可以基本保持航迹角不变。如果采用抗干扰调节器设计方法设计直接升力控制系统,则可以始终保持航迹角为0,从而保证航迹不变。本文以某型飞机为背景讨论了上述问题。采用离散域直接设计。     

基于A320飞机横航向控制律架构的LQ设计

空客A320飞机横航向控制律采用特征结构配置方法计算闭环增益,实现了期望特征值的配置及横航向关键参数之间的解耦。基于A320横航向控制律架构,提出使用线性二次型(Linear Quadratic,简称LQ)方法,对闭环增益进行重新设计。首先根据期望的特征值引入关键参数的频域整形环节,而后通过调整二次型性能指标加权矩阵实现期望特征值的逼近及关键参数之间的解耦,并求得闭环反馈增益,最后在特征结构、稳定裕度和横航向解耦效果方面与空客设计结果作了对比分析。仿真结果表明,LQ设计可获得与特征结构配置设计相近的结果,即得到接近期望值的特征值,并实现关键变量的解耦,同时保证了闭环稳定裕度。     

飞机直接力模态控制律设计

 本文应用特征结构配置理论提出了一种飞机直接力模态控制系统设计方法,即适当选取闭环特征向量使得飞机相应状态动态解耦,从而实现飞机直接力模态控制要求。本文为某型飞机设计了直接力两种模态——机身俯仰和垂直平移的控制器。     

Analysis and tuning of a ‘Total Energy Control System’ control law using eigenstructure assignment

The Total Energy Control System (TECS) is a complete airplane longitudinal dynamics flight control concept for autopilot operational control modes and Fly-By-Wire command augmentation for civil airplanes. Unlike conventional strategies, it facilitates fully integrated control of the airplane elevator and engines. This system, which is based on simple proportional and integral control of the energy states of the airplane, is much easier to design and understand than most conventional airplane controllers.This paper describes why the high visibility of the two input, two output command augmentation structure of TECS is an improvement over current flight control system architectures. Deriving a control law for TECS is currently a heuristic process. However, there is potential for tuning to be done more systematically, and this is examined by using eigenstructure analysis and assignment. To illustrate the concepts, a linear model of the longitudinal dynamics of the Aerospace Technologies Demonstrator (ATD) airplane is used. A heuristically designed TECS controller for this model is first described. The controlled airplane is then analysed using eigenstructure analysis and the results are utilised to produce an improved TECS controller for the ATD model using eigenstructure assignment.     

Simple adaptive control for aircraft control surface failures

This work extends the so-called simple adaptive control approach to direct model reference adaptive control of multi-input multi-output systems to include loss of control effectiveness failures. It is proven that all signals are bounded for loss of control effectiveness failures during a bounded input disturbance. A state space approach is introduced for computing the feedforward compensator that is required by the stability result. The adaptive algorithm is applied to a three input model of the linearized lateral dynamics of the F/A-18 aircraft. Simulation results are obtained with single, double, and triple control effectiveness failures of 88% during the occurrence of a lateral gust. These results show that the adaptive controller exhibits improved model following as compared with a fixed gain eigenstructure assignment controller.     

An output feedback controller for a synchronous generator

A novel approach using eigenstructure assignment is developed for the design of excitation controllers for synchronous generators. The computation procedure for the method is easy to apply, and an exact solution can be obtained without iteration. Controllers designed by the proposed approach can be easily implemented by means of proportional-integral (PI) controllers. Practical considerations in reaching an optimum selection of closed-loop eigenvalues are addressed. Time-domain simulation results are presented to verify the effectiveness of the design method     

Integrated active fault-tolerant control using IMM approach

An integrated fault detection, diagnosis, and reconfigurable control scheme based on interacting multiple model (IMM) approach is proposed. Fault detection and diagnosis (FDD) is carried out using an IMM estimator. An eigenstructure assignment (EA) technique is used for reconfigurable feedback control law design. To achieve steady-state tracking, reconfigurable feedforward controllers are also synthesized using input weighting approach. The developed scheme can deal with not only actuator and sensor faults, but also failures in, system components. To achieve fast and reliable fault detection, diagnosis, and controller reconfiguration, new fault diagnosis and controller reconfiguration mechanisms have been developed by a suitable combination of the information provided by the mode probabilities from the IMM algorithm and an index related to the closed-loop system performance. The proposed approach is evaluated using an aircraft example, and excellent results have been obtained