Optimal and adaptive reduced-rank STAP

This paper is concerned with issues and techniques associated with the development of both optimal and adaptive (data dependent) reduced-rank signal processing architectures. Adaptive algorithms for 1D beamforming, 2D space-time adaptive processing (STAP), and 3D STAP for joint hot and cold clutter mitigation are surveyed. The following concepts are then introduced for the first time (other than workshop and conference records) and evaluated in a signal-dependent versus signal independent context: (1) the adaptive processing “region-of-convergence” as a function of sample support and rank, (2) a new variant of the cross-spectral metric (CSM) that retains dominant mode estimation in the direct-form processor (DFP) structure, and (3) the robustness of the proposed methods to the subspace “leakage” problem arising in many real-world applications. A comprehensive performance comparison is conducted both analytically and via Monte Carlo simulation which clearly demonstrates the superior theoretical compression performance of signal-dependent rank-reduction, its broader region-of-convergence, and its inherent robustness to subspace leakage     

基于3DT的空时自适应单脉冲参数估计算法

空时自适应处理(STAP)是机载预警雷达抑制杂波和干扰的一项关键技术,而多普勒三通道联合自适应处理(3DT)是适合工程实现的降维(RD)STAP方法。STAP目标检测后还需进一步估计目标的角度参数,因此将自适应单脉冲(AM)技术引入3DT,提出了一种高精度联合估计目标速度与方位空间角的空时自适应单脉冲算法。理论分析与仿真实验结果表明,当目标多普勒频率偏离检测多普勒单元中心频率时,该算法能同时减少目标多普勒跨越损失和空时导引矢量失配损失,进而提高输出信杂噪比(SCNR),改善目标测角精度。     

Reduced-rank STAP for high PRF radar

Due to the range ambiguity of high pulse-repetition frequency (HPRF) radars, echoes from far-range fold over near-range returns. This effect may cause low Doppler targets to compete with near-range strong clutter. Another consequence of the range ambiguity is that the sample support for estimating the array covariance matrix is reduced, leading to degraded performance. It is shown that space-time adaptive processing (STAP) techniques are required to reject the clutter in HPRF radar. Four STAP methods are studied in the context of the HPRF radar problem: low rank approximation sample matrix inversion (SMI), diagonally loaded SMI, eigencanceler, and element-space post-Doppler. These three methods are evaluated in typical HPRF radar scenarios and for various training conditions, including when the target is present in the training data     

Stap using knowledge-aided covariance estimation and the fracta algorithm

In the airborne space-time adaptive processing (STAP) setting, a priori information via knowledge-aided covariance estimation (KACE) is employed in order to reduce the required sample support for application to heterogeneous clutter scenarios. The enhanced FRACTA (FRACTA.E) algorithm with KACE as well as Doppler-sensitive adaptive coherence estimation (DS-ACE) is applied to the KASSPER I & II data sets where it is shown via simulation that near-clairvoyant detection performance is maintained with as little as 1/3 of the normally required number of training data samples. The KASSPER I & II data sets are simulated high-fidelity heterogeneous clutter scenarios which possess several groups of dense targets. KACE provides a priori information about the clutter covariance matrix by exploiting approximately known operating parameters about the radar platform such as pulse repetition frequency (PRF), crab angle, and platform velocity. In addition, the DS-ACE detector is presented which provides greater robustness for low sample support by mitigating false alarms from undernulled clutter near the clutter ridge while maintaining sufficient sensitivity away from the clutter ridge to enable effective target detection performance     

Space-time adaptive radar performance in heterogeneous clutter

Traditional analysis of space-time adaptive radar generally assumes the ideal condition of statistically independent and identically distributed (IID) secondary data. To the contrary, measured data suggests realistic clutter environments appear heterogeneous and so the secondary data is no longer IID. Heterogeneity leads to mismatch between actual and estimated covariance matrices, thereby magnifying the loss between the adaptive implementation and optimum condition. Concerns regarding the impact of clutter heterogeneity on space-time adaptive processing (STAP) warrant further study. To this end, we propose space-time models of amplitude and spectral clutter heterogeneity, with operational airborne radar in mind, and then characterize expected STAP performance loss under such heterogeneous scenarios. Simulation results reveal loss in signal-to-interference plus noise ratio (SINR) ranging between a few tenths of a decibel to greater than 16 dB for specific cases     

基于杂波子空间估计的MIMO雷达降维STAP研究

 多输入多输出(MIMO)雷达是近年来出现的一种新体制雷达,针对MIMO体制的机载雷达开展空时自适应处理（STAP）技术研究是值得进一步努力的方向。本文研究了机载MIMO雷达STAP技术的降维算法,通过对STAP技术杂波抑制原理进行分析,推导并得到一种基于杂波子空间的降维算法。结合扁长椭球波函数（PSWF）的特点,提出了一种基于杂波子空间估计的降维算法,并与若干降维算法的杂波抑制性能进行比较。结果表明,当存在阵元幅相误差时,该算法在保持杂波抑制性能的同时能够有效地降低STAP算法的运算量。     

Partially Adaptive STAP using the FRACTA Algorithm

A partially adaptive space-time adaptive processor (STAP) utilizing the recently developed FRACTA algorithm is presented which significantly reduces the high computational complexity and large sample support requirements of fully adaptive STAP. Multi-window post-Doppler dimensionality reduction techniques are employed to transform the data prior to application of the FRACTA algorithm. The FRACTA algorithm is a reiterative censoring (RC) and detection algorithm which has been shown to provide excellent detection performance in nonhomogeneous interference environments. Two multi-window post-Doppler dimensionality reduction techniques are considered: PRI-staggered and adjacent-bin. The partially adaptive FRACTA algorithm is applied to the KASSPER I (Knowledge-Aided Sensor Signal Processing & Expert Reasoning) challenge datacube. The pulse repetition interval (PRI)-staggered approach with D=6 filters per Doppler bin is found to provide the best detection performance, outperforming the fully adaptive case while simultaneously reducing the runtime by a factor of ten. Using this implementation, partially adaptive FRACTA detects 197 out of 268 targets with one false alarm. The clairvoyant processor (the covariance matrix for each range cell is known) detects 198 targets with one false alarm. In addition, the partially adaptive FRACTA algorithm is shown to be resilient to jamming, and performs well for reduced sample support situations. When compared with partially adaptive STAP using traditional sliding window processing (SWP), the runtime of partially adaptive FRACTA is 14 times faster, and the detection performance is significantly increased (SWP detects 46 out of 268 targets with one false alarm).     

Spectral-domain covariance estimation with a priori knowledge

A knowledge-aided spectral-domain approach to estimating the interference covariance matrix used in space-time adaptive processing (STAP) is proposed. Prior knowledge of the range-Doppler clutter scene is used to identify geographic regions with homogeneous scattering statistics. Then, minimum-variance spectral estimation is used to arrive at a spectral-domain clutter estimate. Finally, space-time steering vectors are used to transform the spectral-domain estimate into a data-domain estimate of the clutter covariance matrix. The proposed technique is compared with ideal performance and to the fast maximum likelihood technique using simulated results. An investigation of the performance degradation that can occur due to various inaccurate knowledge assumptions is also presented     

机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

Comparison between monostatic and bistatic antenna configurationsfor STAP

The unique characteristics of bistatic radar operation on the performance of airborne/spaceborne moving target indicator (MTI) radars that use space-time adaptive processing (STAP) are discussed. It has been shown that monostatic STAP radar has the following properties. 1) For a horizontal flight path and a planar Earth the curves of constant clutter Doppler (isodops) are hyperbolas. 2) For a sidelooking antenna geometry the clutter Doppler is range independent. 3) Clutter trajectories in the cosφ-F plane (F=normalized Doppler) are in general ellipses (or straight lines for a sidelooking array). We demonstrate that these well-known properties are distorted by the displacement between transmitter and receiver in a bistatic configuration. It is shown that even for the sidelooking array geometry the clutter Doppler is range-dependent which requires adaptation of the STAP processor for each individual range gate. Conclusions for the design of STAP processors are drawn     

Median cascaded canceller for robust adaptive array processing

A median cascaded canceller (MCC) is introduced as a robust multichannel adaptive array processor. Compared with sample matrix inversion (SMI) methods, it is shown to significantly reduce the deleterious effects of impulsive noise spikes (outliers) on convergence performance of metrics; such as (normalized) output residue power and signal to interference-plus-noise ratio (SINR). For the case of no outliers, the MCC convergence performance remains commensurate with SMI methods for several practical interference scenarios. It is shown that the MCC offers natural protection against desired signal (target) cancellation when weight training data contains strong target components. In addition, results are shown for a high-fidelity, simulated, barrage jamming and nonhomogenous clutter environment. Here the MCC is used in a space-time adaptive processing (STAP) configuration for airborne radar interference mitigation. Results indicate the MCC produces a marked SINR performance improvement over SMI methods.     

Adaptive cancellation method for geometry-induced nonstationary bistatic clutter environments

This paper describes and characterizes a new bistatic space-time adaptive processing (STAP) clutter mitigation method. The approach involves estimating and compensating aspects of the spatially varying bistatic clutter response in both angle and Doppler prior to adaptive clutter suppression. An important feature of the proposed method is its ability to extract requisite implementation information from the data itself, rather than rely on ancillary - and possibly erroneous or missing - system measurements. We justify the essence of the proposed method by showing its ability to align the dominant clutter subspaces of each range realization relative to a suitably chosen reference point as a means of homogenizing the space-time data set. Moreover, we numerically characterize performance using synthetic bistatic clutter data. For the examples considered herein, the proposed bistatic STAP method leads to maximum performance improvements between 17.25 dB and 20.75 dB relative to traditional STAP application, with average improvements of 6 dB to 10 dB.     

Efficient robust AMF using the FRACTA algorithm

The FRACTA algorithm has been shown to be an effective space-time adaptive processing (STAP) methodology for the airborne radar configuration in which there exists nonhomogeneous clutter, jamming, and dense target clusters. Further developments of the FRACTA algorithm are presented here in which the focus is on the robust, efficient implementation of the FRACTA algorithm. Enhancements to the FRACTA algorithm include a censoring stopping mechanism, an alternative data blocking approach for adaptive power residue (APR) censoring, and a fast reiterative censoring (RC) procedure. Furthermore, a coherent processing interval (CPI) segmentation scheme for computing the adaptive weights is presented as an alternative approach to computing the adaptive matched filter (AMF) weight vector that allows for lower sample support and reduced computational complexity. The enhanced FRACTA algorithm, denoted as FRACTA.E, is applied to the KASSPER I challenge datacube which possesses dense ground target clusters that are known to have a significant deleterious effect on standard adaptive matched filtering (AMF) processors. It is shown that the FRACTA.E algorithm outperforms and is considerably more computationally efficient than both the original FRACTA algorithm and the standard sliding window processing (SWP) approach. Furthermore, using the KASSPER I datacube, the FRACTA.E algorithm is shown to have the same detection performance as the clairvoyant algorithm where the exact range-dependent clutter covariance matrices are known.     

Vector subspace detection in compound-Gaussian clutter. Part II: performance analysis

For pt. I see ibid., vol. 38, no. 4, p. 1295 (2002). In this second part we deal with the problem of detecting subspace random signals against correlated non-Gaussian clutter modeled by the compound-Gaussian distribution. In the first part of the paper, we derived the optimum Neyman-Pearson (NP) detector, the generalized likelihood ratio test (GLRT), and a constant false-alarm rate (CFAR) detector; we also provided some interesting interpretations of them. In this second part, these detectors are tested against both simulated data and measured high resolution sea clutter data to investigate the dependence of their performance on the various clutter and signal parameters. Numerical examples concern a space-time adaptive processing (STAP) scenario and a ground-based surveillance radar system scenario.     

NEW METHOD FOR REDUCED RANK STAP—NON CLUTTER CHANNEL METHOD

Space- time adaptive processing(STAP) is aleading technology candidate for improving detec-tion performance of advanced airborne early warn-ing radar.In practical radar systems,the optimumfully adaptive space- time processing[1] cannot al-ways be implemented because of the computationalcomplexity,so the design of suboptimum proces-sors has been one of the key topics in STAP.Sev-eral reduced- rank STAP methods have been pro-posed in recent years.For example,based on thegeneralized sidelobe…     

Angle/Doppler estimation in heavy-tailed clutter backgrounds

This work describes new methods on the modeling of the amplitude statistics of airborne radar clutter by means of alpha-stable distributions. We develop joint target angle and Doppler, maximum likelihood-based estimation techniques from radar measurements retrieved in the presence of impulsive uncorrelated noise modeled as an alpha-stable random process. We derive the Cramer-Rao bounds (CRBs) for the additive Cauchy interference scenario to assess the best case estimation accuracy which can be achieved. In addition, we introduce a new joint spatial- and Doppler-frequency high-resolution estimation technique based on the fractional lower order statistics of the measurements of a radar array. Simulation results demonstrate that the proposed methods can be of interest in the study of space-time adaptive processing (STAP) for airborne pulse Doppler radar arrays operating in impulsive interference environments     

一种基于角度-多普勒补偿的均匀圆形

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度-多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

Implementing digital terrain data in knowledge-aided space-time adaptive processing

Many practical problems arise when implementing digital terrain data in airborne knowledge-aided (KA) space-time adaptive processing (STAP). This paper addresses these issues and presents solutions with numerical implementations. In particular, using digital land classification data and digital elevation data, techniques are developed for registering these data with radar return signals, correcting for Doppler and spatial misalignments, adjusting for antenna gain, characterizing clutter patches for secondary data selection, and ensuring independent secondary data samples. These techniques are applied to select secondary data for a single-bin post-Doppler STAP algorithm using multi-channel airborne radar measurement (MCARM) program data. Results with the KA approach are compared with those obtained using the standard sliding window method for choosing secondary data. These results illustrate the benefits of using terrain information, a priori data about the radar, and the importance of statistical independence when selecting secondary data for improving STAP performance     

Multistage partially adaptive STAP CFAR detection algorithm

A new method of partially adaptive constant false-alarm rate (CFAR) detection is introduced. The processor implements a novel sequence of orthogonal subspace projections to decompose the Wiener solution in terms of the cross-correlation observed at each stage. The performance is evaluated using the general framework of space-time adaptive processing (STAP) for the cases of both known and unknown covariance. It is demonstrated that this new approach to partially adaptive STAP outperforms the more complex eigen-analysis approaches using both simulated DARPA Mountain Top data and true pulse-Doppler radar data collected by the MCARM radar