Extrasolar space exploration by a solar sail accelerated via thermal desorption of coating

For extrasolar space exploration it might be very convenient to take advantage of space environmental effects such as solar radiation heating to accelerate a solar sail coated by materials that undergo thermal desorption at a particular temperature. Thermal desorption can provide additional thrust as heating liberates atoms, embedded on the surface of the solar sail. We are considering orbital dynamics of a solar sail coated with materials that undergo thermal desorption at a specific temperature, as a result of heating by solar radiation at a particular heliocentric distance, and focus on two scenarios that only differ in the way the sail approaches the Sun. For each scenario once the perihelion is reached, the sail coat undergoes thermal desorption. When the desorption process ends, the sail then escapes the Solar System having the conventional acceleration due to solar radiation pressure. We study the dependence of a cruise speed of a solar sail on perihelion of the orbit where the solar sail is deployed. The following scenarios are considered and analyzed: (1) Hohmann transfer plus thermal desorption. In this scenario the sail would be carried as a payload to the perihelion with a conventional propulsion system by a Hohmann transfer from Earth’s orbit to an orbit very close to the Sun and then be deployed. Our calculations show that the cruise speed of the solar sail varies from 173?km/s to 325?km/s that corresponds to perihelion 0.3?AU and 0.1 AU, respectively. (2) Elliptical transfer plus Slingshot plus thermal desorption. In this scenario the transfer occurs from Earth’s orbit to Jupiter’s orbit; then a Jupiter’s fly-by leads to the orbit close to the Sun, where the sail is deployed and thermal desorption comes active. In this case the cruise speed of the solar sail varies from 187?km/s to 331?km/s depending on the perihelion of the orbit. Our study analyses and compares the different scenarios in which thermal desorption comes beside traditional propulsion systems for extrasolar space exploration.     

Spinning solar sail orbit steering via spin rate control

The orbit of a solar sail can be controlled by changing the attitude of the spacecraft. In this study, we consider the spinning solar power sail IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun), which is managed by Japan Aerospace Exploration Agency (JAXA). The IKAROS attitude, i.e., the direction of its spin-axis, is nominally controlled by the rhumb-line control method. By utilizing the solar radiation torque, however, we are able to change the direction of the spin-axis by only controlling its spin rate. With this spin rate control, we can also control indirectly the solar sail’s trajectory. The main objective of this study is to construct the orbit control strategy of the solar sail via the spin-rate control method. We evaluate this strategy in terms of its propellant consumption compared to the rhumb-line control method. Finally, we present the actual flight attitude data of IKAROS and the change of its trajectory.     

太阳帆航天器编队维持和重构的方法研究

针对高面质比航天器可以利用太阳光压进行轨道控制的特点,本文提出一种太阳帆航天器编队构型维持和重构的方法.该方法通过控制主从航天器太阳帆姿态角和反射系数,调整主从航天器之间的光压差,产生抵消编队成员间相对运动受到摄动差或进行轨道机动时所需的连续小推力,从而实现编队构型的维持和重构.仿真结果表明,在主航天器太阳帆的姿态角和反射系数相对固定的条件下,对于太阳同步轨道上的高面质比太阳帆航天器编队,使用滑模控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生推力抵消摄动力影响,达到长期维持太阳帆航天器编队构型的目的;通过开环控制方法,能够调整编队中从航天器太阳帆的姿态角和反射系数产生连续小推力,在较长时间周期内实现编队重构.     

Controlled solar sail transfers into the near-sun orbits

We present results of numerical simulations of trajectories of a space probe with a flat solar sail which moves from a circular Earth orbit to near-Sun regions. We consider the upper limit of the sail temperature as the basic restriction. We also examine the planar (ecliptic) solar sail transfer with gravity-assist flybys around planets.     

Solar orbiter, a high-resolution mission to the sun and inner heliosphere

The scientific rationale of the Solar Orbiter is to provide, at high spatial (35 km pixel size) and temporal resolution, observations of the solar atmosphere and unexplored inner heliosphere. Novel observations will be made in the almost heliosynchronous segments of the orbits at heliocentric distances near 45 R and out of the ecliptic plane at the highest heliographic latitudes of 30° – 38°. The Solar Orbiter will achieve its wide-ranging aims with a suite of sophisticated instruments through an innovative design of the orbit. The first near-Sun interplanetary measurements together with concurrent remote observations of the Sun will permit us to determine and understand, through correlative studies, the characteristics of the solar wind and energetic particles in close linkage with the plasma and radiation conditions in their source regions on the Sun. Over extended periods the Solar Orbiter will deliver the first images of the polar regions and the side of the Sun invisible from the Earth.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

姿态角幅值约束下的太阳帆Lissajous轨道保持控制

太阳帆航天器以两姿态角作为轨道控制输入时, 其轨道动力学方程具有非仿射非线性特性. 通过人工平动点处线性化获得的线性系统可完成太阳帆航天器轨道保持控制器的分析与设计. 由于线性近似模型为有误差模型, 存在近似有效范围约束, 表现为轨道高度约束和姿态角幅值约束. 本文研究了姿态角幅值约束对线性近似模型有效性的影响, 通过计算给出满足近似误差要求的姿态角幅值约束. 当控制输入存在幅值约束时, 控制器轨道修正能力受到束缚. 通过研究姿态角幅值约束下的最大允许入轨误差, 设计了最大允许入轨误差下线性二次型调节器(LQR)用于轨道保持控制, 并将控制器应用于太阳帆日地三体系统非线性模型中, 实现了日地人工L₁点Lissajous轨道最大允许入轨误差的控制收敛和良好精度下的轨道保持控制.      

Optimal steering law of refractive sail

The interaction between electromagnetic waves and matter is the working principle of a photon-propelled spacecraft, which extracts momentum from the solar radiation to obtain a propulsive acceleration. An example is offered by solar sails, which use a thin membrane to reflect the impinging photons. The solar radiation momentum may actually be transferred to matter by means of various optical phenomena, such as absorption, emission, or refraction. This paper deals with the novel concept of a refractive sail, through which the Sun’s light is refracted by crossing a film made of polymeric micro-prisms. The main feature of a refractive sail is to give a large transverse component of thrust even when the sail nominal plane is orthogonal to the Sun-spacecraft line. Starting from the recent literature results, this paper proposes a semi-analytical thrust model that estimates the characteristics of the propulsive acceleration vector as a function of the sail attitude angles. Such a mathematical model is then used to analyze a simplified Earth-Mars and Earth-Venus interplanetary transfer within an optimal framework.     

Accurate approximation of in-ecliptic trajectories for E-sail with constant pitch angle

Propellantless continuous-thrust propulsion systems, such as electric solar wind sails, may be successfully used for new space missions, especially those requiring high-energy orbit transfers. When the mass-to-thrust ratio is sufficiently large, the spacecraft trajectory is characterized by long flight times with a number of revolutions around the Sun. The corresponding mission analysis, especially when addressed within an optimal context, requires a significant amount of simulation effort. Analytical trajectories are therefore useful aids in a preliminary phase of mission design, even though exact solution are very difficult to obtain. The aim of this paper is to present an accurate, analytical, approximation of the spacecraft trajectory generated by an electric solar wind sail with a constant pitch angle, using the latest mathematical model of the thrust vector. Assuming a heliocentric circular parking orbit and a two-dimensional scenario, the simulation results show that the proposed equations are able to accurately describe the actual spacecraft trajectory for a long time interval when the propulsive acceleration magnitude is sufficiently small.     

太阳帆航天器的关键技术

将太阳帆航天器所涉及的关键技术划分为4个方面：总体设计、轨道和姿态动力学与控制、太阳帆材料及其性能、太阳帆折叠与展开。针对每项关键技术,基于对国外长期研究结果进行分析并阐述主要技术特征,梳理国内相关研究进展,包括笔者与合作者的研究成果,分析存在的主要问题。根据上述分析,指出我国发展太阳帆航天器应该重视的若干问题。     

December 2006 solar extreme events and their influence on the near-Earth space environment: “Universitetskiy-Tatiana” satellite observations

The Russian microsatellite “Universitetskiy-Tatiana” was launched on Jan. 20, 2005 and was both a scientific and educational mission. Its two main aims were declared as: (1) monitoring of the energetic particles dynamics in the near-Earth space environment after solar events and during quiet times, (2) educational activities based on experimental data obtained from the spacecraft. In this paper observations acquired during Dec. 5–16, 2006, known as “Solar Extreme Events 2006”, were analyzed. The “Universitetskiy-Tatiana” microsatellite orbit permits one to measure both solar energetic particle dynamics, variations of the boundary of solar particle penetration, as well as relativistic and sub-relativistic electrons of the Earth’s outer radiation belt during and after magnetic storms. Both relativistic electrons of the Earth’s outer radiation and solar energetic particles are an important source of radiation damage in near-Earth space. Therefore, the presented experimental results demonstrate the successful application of a small educational spacecraft both for scientific and educational programs.     

A torus-shaped solar sail accelerated via thermal desorption of coating

A torus-shaped sail consists of a reflective membrane attached to an inflatable torus-shaped rim. The sail’s deployment from its stowed configuration is initiated by introducing inflation pressure into the toroidal rim with an attached circular flat membrane coated by heat-sensitive materials that undergo thermal desorption (TD) from a solid to a gas phase. Our study of the deployment and acceleration of the sail is split into three steps: at a particular heliocentric distance a torus-shaped sail is deployed by a gas inflated into the toroidal rim and the membrane is kept flat by the pressure of the gas; under heating by solar radiation, the membrane coat undergoes TD and the sail is accelerated via TD of coating and solar radiation pressure (SRP); when TD ends, the sail utilizes thrust only from SRP. We study the stability of the torus-shaped sail and deflection and vibration of the flat membrane due to the acceleration by TD and SRP.     

太阳帆航天器行星际轨道转移优化算法

研究基于遗传算法的太阳帆行星际转移轨道的全局优化问题.通过极小值原理推导了太阳帆全局优化控制律,并以太阳帆飞行时间最短为优化目标函数,运用遗传算法对发射时间、到达时间和协态变量初值进行参数优化设计.为了解决轨道转移这一多约束优化问题,在遗传算法中加入动态罚函数.在此理论基础上作了从地球同步轨道出发到火星同步轨道转移和从地球出发与火星交会两个算例,仿真结果表明了该方法在太阳帆转移轨道全局优化中的有效性.     

Systems design of a hybrid sail pole-sitter

This paper presents the preliminary systems design of a pole-sitter. This is a spacecraft that hovers over an Earth pole, creating a platform for full hemispheric observation of the polar regions, as well as direct-link telecommunications. To provide the necessary thrust, a hybrid propulsion system combines a solar sail with a more mature solar electric propulsion (SEP) thruster. Previous work by the authors showed that the combination of the two allows lower propellant mass fractions, at the cost of increased system complexity. This paper compares the pure SEP spacecraft with the hybrid spacecraft in terms of the launch mass necessary to deliver a certain payload for a given mission duration. A mass budget is proposed, and the conditions investigated under which the hybrid sail saves on the initial spacecraft initial mass. It is found that the hybrid spacecraft with near- to mid-term sail technology has a lower initial mass than the SEP case if the mission duration is 7 years or more, with greater benefits for longer duration missions. The hybrid spacecraft with far-term sail technology outperforms the pure SEP case even for short missions.     

Time-optimal trajectories to circumsolar space using solar electric propulsion

The aim of this paper is to explore the capabilities of a solar electric propelled spacecraft on a mission towards circumsolar space. Using an indirect approach, the paper investigates minimum time of transfer (direct) trajectories from an initial heliocentric parking orbit to a desired final heliocentric target orbit, with a low perihelion radius and a high orbital inclination. The simulation results are then collected into graphs and tables for a trade-off analysis of the main mission parameters. Finally, a comparison of the performance between a solar electric and a (photonic) solar sail based spacecraft is discussed.     

On-orbit verification of fuel-free attitude control system for spinning solar sail utilizing solar radiation pressure

This paper introduces a new attitude control system for a solar sail, which leverages solar radiation pressure. This novel system achieves completely fuel-free and oscillation-free attitude control of a flexible spinning solar sail. This system consists of thin-film-type devices that electrically control their optical parameters such as reflectivity to generate an imbalance in the solar radiation pressure applied to the edge of the sail. By using these devices, minute and continuous control torque can be applied to the sail to realize very stable and fuel-free attitude control of the large and flexible membrane. The control system was implemented as an optional attitude control system for small solar power sail demonstrator named IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun). In-orbit attitude control experiments were conducted, and the performance of the controller was successfully verified in comparison with the ground-based analytical performance estimation.     

Effects of optical parameter measurement uncertainties and solar irradiance fluctuations on solar sailing

The heliocentric orbital dynamics of a spacecraft propelled by a solar sail is affected by some uncertainty sources, including possible inaccuracies in the measurement of the sail film optical properties. Moreover, the solar radiation pressure, which is responsible for the solar sail propulsive acceleration generation, is not time-constant and is subject to fluctuations that are basically unpredictable and superimposed to the well-known 11-year solar activity cycle. In this context, this work aims at investigating the effects of such uncertainties on the actual heliocentric trajectory of a solar sail by means of stochastic simulations performed with a generalized polynomial chaos procedure. The numerical results give an estimation of their impact on the actual heliocentric trajectory and identify whether some of the uncertainty sources are more relevant than others. This is a fundamental information for directing more accurate theoretical and experimental efforts toward the most important parameters, in order to obtain an accurate knowledge of the solar sail thrust vector characteristics and, eventually, of the spacecraft heliocentric position.     

一种基于太阳震荡时间延迟量测的自主天文导航方法

太阳震荡可以在短时间内引起太阳光强度和光谱线心波长的剧烈变化,通过探测太阳光强度和光谱线心波长并记录时间,可以获得直接接收的太阳光到达时间和经天体反射的太阳光到达时间之间的时间延迟,可以利用时间延迟作为量测量提供航天器的位置信息。提出了一种基于太阳震荡时间延迟量测的自主天文导航方法;建立了基于时间延迟的隐式量测模型,并应用了IUKF方法。仿真结果表明：本文所提出的导航方法,应用在转移轨道上的位置误差和速度误差分别约为3.55 km和0.077 m/s,环绕轨道分别为1.76 km和1.57 m/s。同时也研究了3种因素对导航性能的影响。     

The interstellar heliopause probe technology reference study

The interstellar heliopause probe (IHP) is one of ESA’s technology reference studies (TRS). The TRS aim to focus the development of strategically important technologies of relevance to future science missions by studying technologically demanding and scientifically interesting missions that are currently not part of the science mission programme.

Equipped with a highly integrated payload suite (HIPS), the IHP will perform in situ exploration of the heliopause and the heliospheric interface. The HIPS, which is a standard element in all TRSs, miniaturize payloads through resource reduction by using miniaturized components and sensors, and by sharing common structures and payload functionality.

To achieve the scientific requirements of the mission, the spacecraft is to leave the heliosphere as close to the heliosphere nose as possible and reach a distance of 200 AU from the Sun within 25 years. This is possible by using a trajectory with two solar flybys and a solar sail with characteristic acceleration of 1.1 mm/s², which corresponds to a 245 × 245 m² solar sail and a sail thickness of 1–2 μm. The trajectory facilitates a modest sail design that could potentially be developed in a reasonable timeframe.

In this paper, an update to the results of studies being performed on this mission will be given and the current mission baseline and spacecraft design will be described. Furthermore, alternative solar sail systems and enabling technologies will be discussed.     

Solar sailing in realistic mode,based on a locally-optimal control laws

Ballistic design of solar sailing missions in the solar system is composed of defining the design parameters, the control programs, and the trajectories that provide performance goals of a flight. The use of a solar sail spacecraft imposes specific restrictions on mission parameters that include the degradation limit on the flight duration, the maximum temperature of solar sail's surface, the minimum distance from the Sun, the maximum angular velocity of the spacecraft's rotation and others.Many authors considered the impact of these restrictions on the design of the mission separately, but they used a sophisticated method of finding the exact optimal motion control or applied the most straightforward laws of motion control. This paper uses local-optimal control laws at the complete mathematical models of motion and functioning of solar sail spacecraft to describe a technique of designing interplanetary missions. The described method avoids the need to obtain an accurate optimal solution to the control problem and does not cause significant computational difficulties.