美陆军制导武器试验半实物仿真技术综述

主要综述美国陆军制导武器试验的仿真技术和设施，同时介绍仿真试验中使用的几种典型的目标景象投影技术，并说明了它们的应用范围和优缺点。最后介绍了当前制导武器试验仿真技术的发展趋势。     

Microwave Radiometric Sensing for Air Navigation

This paper discusses the results of an analytic study of the feasibility of using microwave radiometry as a technique for navigation data sensing in Army aircraft. The study included a review of Army aircraft characteristics and navigation requirements. Various means of sensing passively aircraft velocity, altitude, and velocity-altitude ratio were considered. While there appears to be no practical method for direct measurement of either velocity or altitude separately, it does appear possible to measure velocity-altitude ratio by comparing radiometric signals received from the terrain along the aircraft ground track. When combined with a radar altimeter, such a sensor could yield navigation data compatible with Army aircraft requirements. Microwave radiometry may also be the basis for direction sensing (to known landmarks) in high-flying aircraft or satellites.     

The Aircraft Warning Service, Hawaii and the Signal Company,Aircraft Warning, Hawaii

The development of radar by the US Army Signal Corps is traced as a prelude to presenting an account of the first use of radar in a US military action. This was the use of a newly developed Signal Corps radar set to detect the wave of Japanese aircraft as they approached the island of Oahu on the morning of Sunday, December 7, 1941     

非视域成像系统的研究现状和发展趋势

非视域成像是一种新型针对视线外目标的计算成像技术,它以时间飞行探测技术为基础,通过探测被隐藏在视域之外的物体反射回来的光子利用重建算法来重建隐藏物体的像,在自动驾驶、灾难救援、医学成像和军事反恐等方面有着广阔的应用前景。首先介绍了近年来发展起来的主动和被动非视域成像系统的研究现状,从非视域成像系统的成像装置、分辨率和重建算法等几个方面分析各自的特点和发展趋势。最后,还讨论了非视域成像技术在实际场景应用中所需要解决的一些关键问题,并展望了非视域成像技术的未来发展方向。     

Definitions of Effectiveness Terms: A Report on the Purpose and Contents of MIL-STD-721B

The impact of the Systems Effectiveness concept upon U.S. military terminology required for acquisition of modern weapon systems necessitated a thorough revision of MIL-STD-721A and consolidation with MIL-STD-778 and MIL-STD447. Inclusion of a number of new terms and their definitions, as well as addition of standard definitions for terms on human factors and safety, was found to be necessary. The resulting military standard has been approved by the U.S. Department of Defense for use by all of its departments and agencies. Its contents should be of great interest to management and engineers in private industry who are concerned with the development and production of weapon systems for the Army, Navy, and Air Force. This standard is now in print and will be available for distribution early in 1967; this paper is written by one of the participants in the revision and compilation of this military standard and is published here for the purpose of information on its scope and contents.     

Effectiveness of MMW aerosols in defeating a battlefieldsurveillance radar: field demonstration preliminary results

The US Army ERDEC is developing advanced aerosol systems to combat threat surveillance, fire control, and seeker systems operating in the visible, infrared, and millimeter wave portions of the electromagnetic spectrum. One such system is the M56 multispectral smoke generator, which presently operates in the visible and infrared portions of the spectrum; a millimeter wave (MMW) Module is in development to extend the M56 spectral range. This paper documents preliminary results of a field demonstration test of the M56 MMW Module. An MMW instrumentation radar was modified to simulate the scan pattern and radar parameters of a tactical battlefield surveillance radar system. A test grid was populated with both stationary and moving tactical targets, and the radar scanned the grid to simulate a surveillance radar in operation. Once a realistic tactical engagement scenario was developed, MMW aerosols were deployed to demonstrate the impact such aerosols could have on radar detection and classification performance     

美国陆军PNT能力发展趋势分析

针对当前全球定位系统(GPS)易受干扰和攻击的影响,定位、导航与授时(PNT)系统需灵活应对多种复杂战场环境。分析了美国陆军未来发展先进PNT技术的背景,重点分析了美国陆军PNT能力的发展趋势,其中主要包括了伪卫星系统、车辆导航系统、惯性导航、定位、导航系统辅助传感器、导航传感器融合、导航仿生技术、授时、PNT建模与仿真、导航战技术应用、自主与人工智能在PNT中的应用等11个方面的发展趋势。最后给出了简要总结,认为美陆军将注重改进单兵和车辆态势感知能力,以提高未来支持战场指挥官的任务指挥和决策能力,同时重点关注了开放式系统架构、SWaP-C优化、自主技术和人工智能技术,以提升PNT的整体能力。     

应用级信息安全解决方案的研究与设计

计算机网络的发展向信息安全提出了新的挑战,在电子商务给人们带来巨大便利的同时,也产生了很多的安全隐患。信息安全是一个不容忽视的问题,而且也越来越得到人们的重视。本文结合开发远程教材管理信息系统的实例,对应用级信息安全需求进行研究分析,根据应用系统的实际业务流程,构建其信息安全解决方案并加以实现。信息安全方案的实施保障了系统的安全性、远程数据传输的完整性和保密性。     

Electronic technologies that enables aerospace

This section highlights early electronics milestones that have made significant contributions to aerospace and defense. Today everyone thinks digital, whereas more than 50% of electronic advances since society founding 50 years ago were in the analog or continuous domain. It is too easy to forget that before the 1970s and 1980s analog systems had been the norm. Digital electronics emerged late in WWII, when the US Army contracted with the University of Pennsylvania to compute extensive artillery firing tables. The Cold War substantially accelerated advances in solid state electronics which led to the microelectronics that are so ubiquitous today. Defense and then aerospace programs were symbiotic with electronics in the development and mass production of transistors, integrated circuits, microelectronics, microprocessors, magnetic and then solid state memory. Small, reliable, low power and high performance electronics were the key to aerospace progress. The government backed virtually all these developments out of necessity. The power of computers has increased by over a million since 1972 and is still climbing. The initial enabling technology for advances in military electronics was the almost forgotten vacuum tube. The existence of electrons was first recognized as the “Edison Effect” in 1883. The seminal event in electronics was the audion invented by Lee De Forrest in 1906. The audion appeared just three years after the first Wright brother's flight and four years before the Army purchased their first Wright airplane. Up until the World War I (WWI) radio amateurs were the electronics pioneers, but the war created new demand for radio communications. Electronics expanded from communications into radar, navigation and control systems in World War II (WWII). Both wars brought about dramatic improvements in electronics, which resulted in a surplus of equipment and trained personnel to fuel postwar advances     

Radio observations of Venus and the interpretations

The radio observations of Venus are reviewed and compared with theoretical microwave spectra computed for a variety of models of the Venusian environment. The models considered are (a) a CO₂-N₂ atmosphere, (b) an atmosphere of dust (the aeolosphere model), and (c) a cloud model with various loss mechanisms in the cloud. The effect of polarization on the surface emissivity has been included in all the computations. It is shown how the radio observations place limits upon the acceptable models, for example, the density and size of dust particles required in the aeolosphere model. It is shown how some models place severe restrictions on radar observations at short centimeter wavelengths, thereby emphasizing the importance of such experiments. These same models show that the Mariner II observations can not be interpreted in terms of surface phenomena and provide a new interpretation for the microwave phase effect.This work was supported in part by the U.S. Army, Navy and Air Force under Contract DA36-039-AMC-03200(E); and in part by the National Aeronautics and Space Administration (Grants NsG-250-62 and NsG-419).     

Advances in Zener Diode Vehicular and Aircraft Transient Suppressors

The prime purpose of this paper is to describe the advances in Zener diode transient suppressors for ground vehicle and aircraft application. The evolution of the transient suppressor development for the U.S. Army is presented with emphasis on space, weight, and cost considerations. Improvements including an electronic thermal switch and a "battle override" switch are also described. A futuristic transient suppressor of modular design developed for use as an integral part of the equipment being protected is functionally described.     

激光选区熔化技术在航空航天领域的发展现状及典型应用

增材制造技术(AM)是一种基于离散-堆积原理,以计算机模型数据来加工组件的新型制造技术。激光选区熔化(SLM)作为增材制造领域的一项重要技术,以其一体化制造特点和在复杂结构零部件制造领域的显著优势,成为航空航天制造领域的重点发展技术和前沿方向。本文综述了SLM技术的材料体系和应用领域,主要对SLM技术的最新工艺研究和航空航天领域的典型应用进行细致分析。重点阐述SLM铁基合金、镍基合金、钛合金和铝合金等材料体系的研究进展及成果。SLM技术在各领域广泛应用的同时,也存在成形材料内部缺陷多、高性能材料的裂纹及变形、标准体系的欠缺和粉末材料兼容性低等诸多问题和不足之处,使其发展受到一定制约,需要在这些方面做更深入的工作。     

Terrain intervisibility-believe it or not?

Computer generated digital maps with terrain intervisibility displays are becoming a common addition to aircraft cockpits. Also known as masking plots, these displays show dangerous regions exposed to threats, highlight terrain visible from the current (or future) aircraft location, and keep track of regions hidden from view during searches with various types of sensors. High resolution displays of semi-transparent intervisibility overlaid on sharp clear digital maps are very convincing but can they be believed? Not completely. Intervisibility displays serve a valuable function. But to build and use these systems wisely, it is good to understand the errors and limitations involved. At LMFS, we have integrated digital maps from other companies into avionics systems such as Army Special Operations Aircraft and MH-53J, and have analyzed the errors associated with the use of level 1 and level 2 terrain elevation data from the National Imagery and Mapping Agency (NIMA). We have also developed a number of real-time intervisibility and probabilistic intervisibility functions using a hybrid of multiresolution techniques and algorithms to obtain the best results possible for a given set of computer resources. This paper explores some of the problems, solutions, and human/machine interface considerations associated with the generation and use of intervisibility     

翼身融合民机总体气动技术研究进展与展望

翼身融合（BWB）布局作为下一代亚声速民机主流方案已得到共识,研究步伐正在加快,进入工程应用指日可待。在回顾国内外BWB民机发展历程的基础上,简要阐述了飞翼布局（FW）和BWB布局的差异,明确了BWB概念特征及应用范围。聚焦BWB飞机总体气动设计中的技术挑战和对策,重点论述分析了BWB布局技术瓶颈及设计思想演化,新型结构与重量估算、适航符合性等总体设计问题,气动布局设计原则、高-低速性能协调等气动布局设计问题,飞-发干扰与一体化设计、新型发动机技术应用等飞机-发动机综合集成设计问题,降噪技术及其衍生的设计冲突、考虑噪声指标的总体设计策略等问题。并从技术进展和工程可实现性角度,展望了BWB民机的发展趋势。     

基于MDA的快速软件开发框架的研究

通过研究基于MDA的软件开发理念,分析和探讨了软件开发效率、系统移植、互操作性以及软件维护等突出问题。提出了一种软件开发框架,采用XML建立平台无关模型（PIM）,建立模型驱动运行时环境（MDR）,对PIM模型进行解析和执行,最终生成HTML页面。框架能够极大地提高开发效率,方便系统扩展和后期维护,有利于开发人员进行Web应用程序的二次开发。     

陕西省县域经济发展浅探

党的十六大提出"壮大县域经济"以来,县域经济作为社会经济一种新的发展模式已受到社会各界越来越多的关注.发展壮大县域经济,增强县城经济活力和竞争力,也是陕西省目前经济发展的重要任务之一.通过对陕西省县域经济现状的阐述,指出了存在的问题,提出了强化特色意识、环境意识、开放意识和推进"三化"进程等发展壮大陕西省县域经济的建议和措施.     

河南省金融产业竞争力评价与对策

以河南省为研究重点，选取了31个省份作为对照样本，这用主成分和因子分析法对各个区域的金融产业竞争力进行计量分析和排序，结果认为，东部地区金融产业竞争力仍然保持着绝对优势地位，中部六省中，河南省的金融产业竞争力发挥着龙头作用，被划入我国区域金融产业发展的前三个梯度内，表现出良好的发展态势。在对金融产业竞争力的模糊曲线分析后认为，影响金融产业竞争力提高的八个分力，依其重要程度依次为经济力、科技力、文化力、开放力、设施力、劳动力、聚集力和环境力，均对其产生正向贡献。因此，提高河南省金融产业竞争力，主要应从以下方面入手：（1）促进河南省经济的继续增长，努力提高人均可支配收入水平。（2）做好对内对外开放，尤其是针对不同区域有针对性地扩大对外开放与区际开放。（3）完善对外金融交往基础设施，加强政府的监管效率。（4）拓展河南金融业的发展空间，充分发挥其就业效应。（5）进一步加大科技成果的转化。（6）加强区域向心吸引力，促进产业集聚。（7）加强文化建设，完善金融生态环境。     

空域网格化方法及其在空管中的应用研究

传统的空域理论方法面临交通密度快速增长、空域管制对象复杂多类异构等一系列问题,研究空域数字化建模,发展出新的空中交通四维时空框架,在此基础上开展全新的空域与空中交通流量协同管理是当前的迫切需要。本文聚焦包括平面格网模型以及空域空间格网模型的空域网格化方法的总结,并对空域网格化方法的空管应用研究进行综述,在此基础上,对空域网格化及数字化研究重点及发展趋势进行综合分析。本文研究能够为空域网格化及数字化理论与应用的可持续发展提供科学指引。