机载比幅式测向系统测试平台设计

通过对机载测向技术应用和比幅测向理论的阐述,分析主战机机载测向技术应用的测试需求,详细论述了主战机机载电子对抗中比幅测向系统的测试平台设计过程,为今后的工程实现提供详实依据。     

诱饵诱偏无人机截获系统的仿真分析

诱偏技术是电子对抗中自我保护的有效方法.在分析电扫恒差比幅测向原理的基础上,讨论了设置诱饵情况下无人机截获系统测向的误差;在射频仿真系统中,对诱饵、雷达与无人机的相对位置关系进行了研究,给出了算法,最后通过仿真对其进行了验证.这对电子对抗中武器系统诱偏技术的应用、射频仿真系统功能完善以及武器系统作战效能评估等研究都具有一定的参考价值.     

基于模式空间变换的圆阵无源测向算法研究

建立了均匀圆阵测向系统模型，在其基础上利用模式空间变换方法将均匀圆阵转化为虚拟均匀线阵，使得ESPRIT算法得以应用，从而实现二维无源测向。为验证算法的可行性及可靠性，搭建了七元均匀圆阵实测系统。实验结果表明，该算法所用时间较短，且测向结果较为稳定，可应用于均匀圆阵无源测向系统。     

侦察测向技术研究

无线测向系统在民用和军事领域均有大量的应用。从信号识别的方法出发,对侦察测向方法进行了比较。对目前应用广泛的干涉仪测向方法和对制约其指标实现的解模糊算法进行了分析,最终实现了一套侦察测向系统。     

GNSS复杂电磁环境综合监测测向与分析评估技术

复杂的电磁环境是电磁辐射源集合与电波传播环境相互作用的总和.针对目前GNSS易受复杂电磁环境影响的问题,研究了GNSS复杂电磁环境综合监测测向与分析评估技术,提出了专用信道化监测方法、比幅与比相联合测向方法、卫星导航信号和电磁干扰信号综合分析方法以及GNSS复杂电磁环境影响效应分析评估方法,解决了现有通用设备在弱信号监测测向、电磁干扰信号与导航信号联合监测以及在复杂电磁环境影响效应分析评估方面存在的不足.该技术能够指导GNSS复杂电磁环境综合监测测向与分析评估设备的研制,为GNSS复杂电磁环境监测保障的工程化提供了技术支持.     

利用频谱仪实现多信号测向

随着通信技术的发展,无线电信号之间的干扰越来越严重,无线电信号的测向技术在无线电监测系统中的地位也越来越重要。本文针对目前无线电测向系统的不足,对比较常用的需要硬件支持最少的测向方法———最大信号法进行了改进,设计了一套适用于便携式测向系统使用的测向方法,借助频谱仪实现了多信号的测向,使得测向的频谱范围、随机信号捕获和测向精度得以很大的改进。系统能够对30MHz~18GHz范围内的任意一段频谱进行测向,可以获取测试频段内任意15个典型信号的频点及其方位角和俯仰角信息,测向的最大误差为2°。     

无人机中继平台覆盖区域统计模型

针对中继信号覆盖区域确定性模型没有考虑信道随机衰落影响的问题,提出了一种基于中断概率的无人机（UAVs）中继平台信号覆盖半径统计模型。通过将中继链路建模为包含路径损耗、阴影衰落和多径衰落的复合分布模型,推导获得中继信号覆盖半径的概率分布,并给出一种利用中断概率数值求解覆盖半径的方法。仿真结果表明,信道衰落对覆盖半径影响非常大,当中断概率小于10%时,覆盖半径仅为无衰落信道时的一半。研究结果对移动自组织网络（MANETs）中的中继网络的无人机最优布置、飞行策略以及网络性能评估等具有重要的参考价值。     

无人机中继平台覆盖区域统计模型简

 针对中继信号覆盖区域确定性模型没有考虑信道随机衰落影响的问题,提出了一种基于中断概率的无人机（UAVs）中继平台信号覆盖半径统计模型。通过将中继链路建模为包含路径损耗、阴影衰落和多径衰落的复合分布模型,推导获得中继信号覆盖半径的概率分布,并给出一种利用中断概率数值求解覆盖半径的方法。仿真结果表明,信道衰落对覆盖半径影响非常大,当中断概率小于10%时,覆盖半径仅为无衰落信道时的一半。研究结果对移动自组织网络（MANETs）中的中继网络的无人机最优布置、飞行策略以及网络性能评估等具有重要的参考价值。     

基于Simulink?的复合衰落信道仿真与分析

基于Simulink平台建立了Rayleigh-Lognormal、Ricean-Lognormal、Nakagami-Lognormal复合衰落信道的仿真模型,这些模型可用于进行单频组网的DRM系统的设计和性能分析。给出了各种复合衰落的概率密度函数、累积分布函数、平均电平交叉率、平均衰落时间的统一表达式。仿真结果验证了理论分析结果的正确性。     

基于Simulink(R)的复合衰落信道仿真与分析

基于Simulink(R)平台建立了Rayleigh-Lognormal、Ricean-Lognormal、Nakagami-Lognormal复合衰落信道的仿真模型,这些模型可用于进行单频组网的DRM系统的设计和性能分析.给出了各种复合衰落的概率密度函数、累积分布函数、平均电平交叉率、平均衰落时间的统一表达式.仿真结果验证了理论分析结果的正确性.     

An experimental investigation of three eigen DF techniques

The comparative direction-finding (DF) performance of multiple signal classification (MUSIC), ROOT-MUSIC, and estimation of signal parameters via rotational invariance techniques (ESPRIT) is considered. Data were collected from two target transmitters operating simultaneously. The objective of the experiment was to evaluate multipath resolution capability using measurement precision equivalent to that found in modern radio direction-finding systems     

甚高频全向信标改造成数字通信测向综合化系统的几种新方案

受卫星导航的冲击，甚高频全向信标（VOR）在未来航行系统中将失去它的重要地位，最终可能关闭。为充分利用VOR的频段和设备资源，本文提出了四种VOR发射机改造方案：第一是间断发射的慢速时空调制系统；第二是连续发射的二进制四相时空调制系统；第三是码分有参考信号时空调制系统；第四是时分有参考信号时空调制系统。给出了四种系统信号调制、编码、接收机设计等解决方案。改造系统的主要优点是将数字通信和无线定向综合为一体。     

Modeling and performance of HF/OTH radar target classificationsystems

The effects of a class of multipath propagation channels on the performance of a over-the-horizon (OTH) radar target classification system are considered. A Rician frequency-selective fading channel model is employed to characterize the effects of the multipath propagation medium and evaluate the performance of radar target classification systems. The performance of classification algorithms that employ relative amplitude, relative phase, and absolute amplitude measurements as features is investigated. Performance estimates of the various classification algorithms for interesting sets of channel parameters are obtained by means of Monte-Carlo simulations     

双机协同无源定位的飞行试验方法研究

分析了基于测向交叉定位的双机协同无源定位原理,构建了误差模型,给出了影响定位误差的因素。并从双机定位基线、目标机进入距离和目标机进入方位三个因素进行了双机协同无源定位误差的仿真。通过基于定位精度要求的试飞剖面设计,给出了两种典型的双机协同无源定位试飞航线,并给出试飞结果评估的方法和流程。     

Multipath mitigation method based on Gaussian mixture model in RF relative measurement

Radio Frequency (RF) technology represents a high-precision relative navigation solution that has significant potential for application to earth-orbiting satellites. In precision applications, multipath errors dominate the total error because observables, which are used to estimate carrier-phase integer ambiguity, are not always subject to a Gaussian distribution when dual-frequency ambiguity estimation methods are used in the presence of multipath. As it has been shown that ranging observables obey a Gaussian mixture distribution, this study proposes improvements to the accuracy of estimation based on multipath mitigation founded on the Gaussian mixture model. To this end, such a model is created for integer ambiguity resolution in the presence of multipath, using which the theoretical error in dual-frequency ambiguity estimation is derived. Expectation Maximization (EM), which aids dual-frequency ambiguity estimation, is subsequently proposed to reduce the effect of multipath errors. Finally, two experimental scenarios are implemented to test the performance of the proposed method. The results show that EM-aided dual-frequency ambiguity estimation reduces the range error to approximately 20% in comparison with simple dual-frequency ambiguity estimation. Therefore the proposed technique is effective for multipath mitigation in RF relative measurement.     

A Method of Trigonometric Interpolation for Processing Radio Direction-Finding Signals

Radio direction-finding techniques that use amplitude-trigonometric interpolation between signals received at a circular antenna array are reexamined. The accuracy of this class of direction-finding system is limited by interpolation, gain mistracking, and additive-noise errors. The channel gain mistracking error is shown to be significantly lower than previously estimated. Typical calculations show that the trigonometric interpolation technique is an order of magnitude more accurate than previously supposed.     

Equalization of QPSK Data Transmission in Specular Multipath

This paper gives performance results for transversal-filter equalization of quadriphase phase-shift-keyed (QPSK) signals with two-component multipath and demodulator phase error. An analytical expression for optimum, minimum mean-square-error tap weights in terms of the multipath and signal parameters is given. Probability of error results for no equalization and equalization with adaptive decision-feedback tap-weight adjustment are compared. The results show that significant improvement can be obtained with relatively simple equalizer structures.     

Analysis of airborne GPS multipath effects using high-fidelity EM models

Airborne GPS systems are being upgraded to provide sufficient positioning accuracy to support automatic landing operations in low visibility conditions. This is made possible by differential GPS (DGPS), in which the errors common to the airborne receiver and ground station are removed by knowledge of the latter's precise location. However, errors specific to the airborne system remain, of which the dominant components are receiver noise and multipath. To support the assessment of the integrity of the signal in space, these residual errors are incorporated in a statistically based error model, designated as the "standard model." The standard model is defined as the standard deviation of a Gaussian distribution that overbounds the residual pseudo-range (PR) error. It relates the standard deviation of the overbounding distribution to the elevation angle of the satellite relative to the local level coordinate system. The international community is currently developing improved standards to enable DGPS systems to support landings in the worst visibility conditions (i.e., CAT III). As a part of this development, the standard model for multipath is being re-evaluated and an improved model is sought. In order to better characterize the residual multipath errors, tools for accurate calculation of the airframe scattering effects are needed. Development of such tools is the subject of this paper. A new method for accurately computing pseudo-range error, based on the use of high-fidelity EM models, is described. This approach provides new insight into the mechanisms causing multipath error.     

TMA from bearings and multipath time delays

A novel approach for target motion analysis (TMA), which uses conventional passive bearing together with multipath time-delay measurements is examined. This so-called "Multipath TMA" offers two tactical advantages over the classical bearings-only TMA: no requirement for any ownship maneuver, and a good performance in terms of estimation error achieved in a shorter time. Both known and unknown multipath cases are addressed. Finally, Monte-Carlo simulations and at-sea trials demonstrate the practical efficiency of such a multipath TMA.