Open systems architecture solutions for military avionics testing

Raytheon makes extensive use of open systems architecture methods in developing special test equipment (STE) for testing military avionics equipment. Such use has resulted in significant cost and schedule savings in the development of production test equipment for radar and infrared systems. With open systems architectures, a test system can be assembled using COTS products. This brings economies of scale to test equipment, which is normally built in very low quantities. Therefore, the potential cost savings due to COTS usage is proportionately greater in STE than in the higher volume avionics systems that are tested. A second major benefit of using COTS products is that test system development schedule cycle time is greatly reduced. This paper describes the application of Open Systems Architectures (OSA) to avionics testing. The following major architectures are surveyed: VME bus, VXI bus, IEEE GPIB, IEEE 1149.1 JTAG test bus, 1553 Military Bus, Fibre Channel, and COTS Test Applications Software. We describe how the benefits of OSA have been extended at Raytheon into achieving vertical test commonalities. The flexibility of OSA can be exploited to provide an overall optimum test solution, taking all levels of test into account. For example, test systems can be tailored with COTS products to provide integrated methods for avionics tests at the module, unit, and system levels. Test systems can be configured to maximize the reuse of COTS hardware over all test levels. Test software can also be programmed to optimize such reuse over levels of test. Additional test verticality synergies derived from such OSA usage are described, including: test false alarm avoidance; test cones of tolerance optimization; and efficient test of field returns     

Using open networking standards over MIL-STD-1553 networks

Over the past several decades, the MIL-STD-1553 networking technology has found use in a number of military and aerospace platforms, including applications on aircraft, ships, tanks, missiles, satellites, and even the International Space Station. In developing software applications for these platforms, the use of modern, open networking standards such as TCP/IP is often preferable. The Internet Protocol (IP) provides communications routing, and the Transmission Control Protocol (TCP) provides reliable delivery to the application level. Furthermore, higher-level protocols such as the HyperText Transfer Protocol (HTTP), the File Transfer Protocol (FTP), etc. can be utilized in a TCP/IP environment. Though these open communications standards are preferable for many situations, the MIL-STD-1553B standard does not immediately lend itself to TCP/IP communications. One of the reasons for this is the fundamental difference between the MIL-STD-1553B networking standard, which relies on a bus controller to control communications and other data link layer networking protocols such as IEEE 8023 (Ethernet) which are Carrier Sense Multiple Access (CSMA) networks, and are thus decentralized. Despite differences in MIL-STD-1553B networking and more traditional data link layer networking protocols, there is nothing fundamentally preventing IP communication over a 1553 network. We have implemented a method of encapsulating IP datagrams within MDL-STD-1553B data messages that allows for transparent use of Internet Protocol (IP) APIs at the application level. Our system allows traditional 1553 messages to also be transported over the network, and even allows traditional messages to take a higher transmission priority over IP traffic. We analyze the advantages of such a system and the performance level we achieved with our implementation of this concept.     

航空电子系统MIL-STD-1553通信网络接口验证测试

MIL-STD-1553数据总线为航空电子系统提供了一个系统支撑数据交换网络,它是航空电子系统集成的纽带,其通信完成的质量直接影响航空电子系统设计的成败。本文首先介绍了航空电子系统MIL-STD-1553基于OSI模型的通信终端的基本结构;然后给出了对网络接口执行测试的内容,包括MIL-STD-1553标准协议验证测试、应用网络通信协议验证测试和实时通信验证测试。这三种类型的测试将全面验证MIL-STD-1553通信终端的设计是否满足MIL-STD-1553标准通信协议及航空电子系统通信协议的要求。     

MIL-STD-1553B总线数据压缩研究

MIL-STD-1553B总线具有实时性、确定性和高可靠性,广泛应用于航空、航天、舰船、坦克等安全、任务关键平台,但其传输率已不能满足日益增长的高传输率需求。针对实际1553B总线系统中存在的大量零元素和数据传输前后变化比例较小的情况,提出了基于软件的数据压缩编码以有效提高实际的数据传输率。分析了零跟踪编码、众数跟踪编码、游程编码、改进型游程编码和差分编码的设计方法,并给出了在现有1553B总线上消息传输中的压缩编码应用。     

基于文件的MIL-STD-1553B总线传输研究

MIL-STD-1553B总线适用于小数据量的周期信号以及极少的非周期性信号的传输。为简化机载环境中任务数据传输的设计,提出了基于1553B总线的文件传输需求。简单介绍了1553B总线字格式和消息格式,提出了基于满帧和余帧的大块数据传输方法,构建了文件信息帧和文件数据帧,分析了文件传输的时序和发送及接收的流程。通过设计新的方式命令字实现BC→RT的文件传输,通过设计向量字实现由RT请求传输文件的异步通信。     

Open system concepts for modular avionics

Advanced communications, guidance and navigation systems play key roles in determining superiority of one combat aircraft over another. The use of advanced technology is essential to meeting the mission requirements of present as well as future aircraft. Modular avionics are being used in next generation aircraft, such as the Air Force F-22 fighter and the Army Comanche helicopter, as the means of achieving higher levels of performance, including reduced volume and improved adaptability, maintainability, and expandability. New system acquisitions such as Joint Strike Fighter will attempt to achieve these same performance levels but at dramatically reduced life cycle cost. Retrofit applications will also take on increasing roles in meeting this affordability need as the Department of Defense (DoD) struggles to maintain readiness in the face of the shrinking defense budget. The government is encouraging the use of open standards practices as a means of addressing the affordability issue. The Open Systems Joint Task Force (OS-JTF), formed in September 1994, is chartered to “sponsor and accelerate the adoption of open systems in weapons systems and subsystem electronics to reduce life-cycle costs and facilitate effective weapon system intra- and interoperability”. The purpose of this paper is to relate the concept of open systems to modular avionics. It discusses the key attributes of an open systems approach and identifies key technologies necessary for its success     

Spiral evolution applied to legacy avionics systems

The US Department of Defense (DoD), through the Office of the Secretary of Defense (OSD), has determined that evolutionary acquisition is their strategy of choice for future software-intensive systems, and that the spiral development model (SDM) is the preferred method/process for software-intensive development life cycles. Electronic Systems Command (ESC) at Hanscom AFB, Massachusetts, has written a draft handbook on the use of Spiral Development for all future Command and Control (C2) systems, including reference to the DoD 5000 series and Air Force Program Directive 63-1, Acquisition System, which deploys this OSD mandate for future C2 systems. Barry Boehm's continued work on SDM which he conceived in the 1980s, is heavily biased toward development of new systems that are software-intensive, as noted in a workshop he gave at the Software Engineering Institute (SEI) in 2000.     

基于1553B总线消息触发的数据采集机制

针对1553B总线数据采集的不同用途，简述了一般总线数据采集机制的应用特点及其不足之处。介绍了基于1553B总线事件触发的总线数据采集机制的特点、应用以及注意事项。     

COTS based open systems for military avionics

The DoD has many acquisition programs that are aggressively implementing open architecture principles in new avionics systems. Since “open” is an unclear attribute, projects eventually give in to a point solution that has no flexibility to cost effectively keep up with rapid changes in technology. The Open Systems Development Initiative (OSDI) project utilized COTS products to study the feasibility of building an open system that has plug-and-play capabilities. Lessons learned from the AV-8B Open Systems Core Avionics Requirements (OSCAR) and the F/A-18 Advanced Mission Computers and Displays (AMC&D) programs clearly indicated that understanding the underlying interfaces is crucial to keeping the system as open as possible to take advantage of the rapid changes in technology. A matrix of Key Open Standard Interfaces (KOSI), called the KOSI matrix, was developed and an applicable standard was identified for each interface. A list of non-conforming interfaces was also identified and the use of extensions or wrappers was investigated in an attempt to comply with standards. Standardization, rather than optimization of such interfaces, was considered more beneficial. It became evident that, with the exception of ruggedization, there is no difference in the use of COTS products for either commercial or military systems. Performing a KOSI analysis helped identify the key interfaces and standards, thus enabling the OSDI system to be scalable, portable and interoperable. A good KOSI matrix provides a vehicle for clear communication and helps systems integration and technology insertion to be less painful than what it is today. It helps reduce time-to-market and provides guidance to systems engineers and vendors to keep the system open     

Using LabVIEW to provide rapid prototyping environment for theteaching of avionics systems

This paper describes a simulation environment which has been used to teach the fundamental principles of Avionics Systems to students of Systems Engineering at Loughborough University of Technology. A versatile model of a Radar System is detailed as an example and its attributes from a teaching perspective are highlighted. The generic nature of the environment is also described, as is its position within the systems life cycle     

Design for testability for future digital avionics systems

The authors describe an integrated testing approach called the Maintenance and Diagnostic System (MADS), which was developed for digital avionics systems using VHSIC and semicustom devices. Mission/operational requirements dictate high availability with capability to detect 98% of all faults and isolate 90% of these faults to a line replacement module (LRM) or 95% of the faults to two LRMs. MADS achieves these goals by defining a module maintenance node (MMN) chip set for each LRM in the system and the design for testability concepts for hardware. The MMN aids parallel, high-speed testing of LRMs, isolating the fault(s) to a module/chip level while incurring less than 10% overhead. It uses the concepts of scan set design, pseudorandom test vector generation, output response compression, and separate scan set loops to test the SSI-MSI logic on the LRM. It also stores interim test results and run-time fault information to isolate the hard-to-reproduce failures and performs verification of interchip and intermodule wiring     

Designing to MIL-STD-2165: Testability

The V-22 avionic hardware is the first to be designed under MIL-STD-2165 testability program requirements. This paper presents an overview of the avionics design-for-testability approach and lessons learned to date relative to the application of MIL-STD-2165. The paper will discuss incorporation of testability requirements up front in the avionics design which will drive the supportability philosophy at both the Organizational and Depot levels of maintenance. The paper will compare previous avionics hardware testability requirements versus those applied to the V-22 avionics and highlight areas of improvement. A discussion of testability design impacts on reduced level of testing (i.e. WRA/SRA/System) will be included. In addition, the paper discusses an innovative approach to meeting the user requirements for a man-portable forward deployed maintenance capability that forms the basis for a two level support scenario (Organizational and Depot). The innovation comes from the fact that the on-board Central Integrated Checkout system will provide data as well as fault isolation and will use this data as a mechanism to reduce the size and complexity of the stimulus and measurement hardware at either the Organizational or Depot level depending on the deployment requirements.     

Hardware reconfiguration algorithm in multiprocessor systems of integrated modular avionics

Reconfiguration of multiprocessor systems makes it possible to improve their failure-resistance that is especially important for the integrated modular avionics systems. The algorithm considered in this paper allows minimizing the reservation and providing the better safety level and more effective flight completion or even its further execution in the case of failures of airborne equipment.     

Hybrid partition-and network-level scheduling design for distributed integrated modular avionics systems

Distributed Integrated Modular Avionics(DIMA) develops from Integrated Modular Avionics(IMA) and realizes distributed integration of multiple sub-function areas. Timetriggered network provides effective support for time synchronization and information coordination in DIMA systems. However, inconsistency between processing resources and communication network destroys the time determinism benefiting from partitions and time-triggered mechanism.To ensure such time determinism and achieve guaranteed real-time performance, system design should collectively provide a global communication scheme for messages in network domain and a corresponding execution scheme for partitions in processing domain. This paper firstly establishes a general DIMA model which coordinates partitioned processing and time-triggered communication, and then proposes a hybrid scheduling algorithm using Mixed Integer Programming to produce feasible system schemes. Furthermore, incrementally integrating new functions causes upgrades or reconfigurations of DIMA systems and will generate integration cost. To control such cost, this paper further develops an optimization algorithm based on Maximum Satisfiability Problem and guarantees that the scheduling design for upgraded DIMA systems inherit their original schemes as much as possible. Finally, two typical cases, including a simple fully connected DIMA system case and an industrial DIMA system case, are constructed to illustrate our DIMA model and validate the effectiveness of our hybrid scheduling algorithms.     

High-performance front-end converter for avionics applications [aircraft power systems]

The distributed power systems of future commercial aircraft will adopt variable frequency generation (360 to 800 Hz). Front-end converters in the system will be required to have a high efficiency and a low total harmonic distortion (THD) of the input current. This paper explains the design of a zero-voltage-switching (ZVS) active-clamped isolated low-harmonic SEPIC rectifier for such applications. Utilization of the transformer leakage inductance for ZVS and a single-layer transformer design contribute to a high efficiency. An accurate averaged switch model has been developed, which shows that the control-to-input-current transfer function of this converter does not exhibit resonances observed in the conventional SEPIC. As a result, for closed-loop operation using average current control, damping of the coupling capacitor is not required. Operating at a switching frequency of 200 kHz, an experimental 100 W, 28 V output rectifier achieves a THD of 3-4% and efficiency exceeding 90% over the entire line frequency range.     

Correspondence [Errata to "Military digital avionics fiber-optic network design for maintainability and supportability", Sep 06]

Readers provide commentary about previous articles from the IEEE Aerospace and Electronic Systems Magazine.