基于OSGi的短信平台设计

智能家庭网络是信息时代的高科技产物,它采用现有的计算机网络技术,将家庭内各种家电设备连网,通过网络为人们提供各种丰富、多样化、个性化、方便、舒适、安全和高效的服务.随着人们对智能家庭的兴趣逐渐升温,智能化信息家电产品已经开始步入社会和家庭.在此背景下,提出了一种实现智能家庭网络的解决方案.将OSGi规范应用于智能家庭网关,无线通讯设备连入家庭网络,实现基于GSM无线通讯的远程监控系统.     

基于LONWORKS技术的智能小区网络系统研究

智能化住宅已经成为随着信息技术发展而新兴起的一个产业。在智能化小区建设过程中。Lonworks技术因其良好的开放性、可靠性、扩充性等特点，可以很容易地实现智能化住宅小区的部分主要功能。因而被广泛应用。本文首先讲述了当前智能小区国内外发展情况，讲述现场总线的发展和几种比较有影响的总线技术。并提出了一种新颖的基于Lonworks技术的智能化住宅小区设计方案。     

嵌入式网关技术在门禁控制系统中的应用

随着计算机网络技术的发展和普及，目前出现了以单片机技术和以太网技术为核心的嵌入式网关技术，采用嵌入网关技术，可在局域网环境下采用TCP/IP协议实现门禁控制控制器同后台服务器的数据交换。其优点是技术先进、数据传输速度高、工程成本低、可靠性和安全性高。在论述了嵌入式网关工作原理的基础上，重点讨论了嵌入式网关中的门禁控制器的应用问题。     

基于对等网络的PSTN网关的研究与实现

P2P(Peer to Peer)技术以及VoIP(Voice over IP)技术是目前互联网上正在研究的两个热点,将VoIP与P2P两项技术相结合,发挥各自的优势,对于电信业和互联网的发展都有极大的促进作用.从介绍P2P的拓扑结构入手,讨论了基于P2P的VOIP架构,并在此基础上实现了基于P2P的与PSTN通信的语音网关.     

板级互连网关的时间触发消息转发调度方法

针对航天电子综合化系统时间触发通信中跨越骨干网互连和板级芯片间互连的网关转发调度,以保证TT消息间顺序关系和减少网关中等待时间为目标,进行转发调度方法及其网关中等待时间算法的研究.首先分别以减少网关内等待时间和保序为目标给出了不保序和完全保序的TT消息转发调度方法,并重点给出了其网关内等待时间算法;然后提出了考虑应用规...     

基于CORBA的分布式网络管理的研究

详细地介绍了将CORBA这种面向对象地分布式中间件用于网络管理的方法,着重探讨在实现基于CORBA的分布式网络管理中的关键的技术-CORBA/SNMP网关,通过CORBA/SNMP网关实现CORBA域与SNMP域的透明通信。     

国内外智能制造的发展及对我国商用航空发动机发展的启示

多个国家在全球范围内部署了智能制造发展战略,建设航空发动机智能工厂是《中国制造2025》重点支持的方向。通过介绍国外商用航空发动机公司智能制造发展现状,探讨我国建设商用航空发动机智能工厂的关键问题,明确发展行业智能制造标准化工具,促进产品智能化改造,实现生产组织数字化、网络化、智能化是实现商用航空发动机智能制造的关键技术手段。     

信息家电无线网关系统总体设计与实现

信息家电无线网关系统实现Internet无线路由和网关功能,总体目标是实现家电产品的网络化、信息化。信息家电控制器由传统的家电控制器嵌入无线网络通信接口模块所构成,信息家电无线网关和信息家电之间通过无线通信链路连接,用户可以通过任何一台接入Internet的计算机对接入网络的信息家电进行控制、监视和操作,信息家电也能依据用户设置自动地向Internet上的指定网站或E-mail信箱发布消息。     

智能火灾探测报警系统的两大构成要素

本文叙述了智能火灾探测报警系统的两大构成要素-火灾探测智能和总线通讯智能。并结合我们在研制“复合式感烟感温火灾探测报警系统”中所取得的成果和经验，着重论述了火灾探测智能和总线通讯智能的实现方法及其各自在系统中所起的关键作用。通过两者的互补来实现火灾探测报警系统智能化。     

CNS/ATM网关集群网络管理系统的设计与实现

针对新航行系统(CNS/ATM)网关集群的网络管理问题,提出了一种基于SNMP的网络管理系统的实现方案,采用一种分布集中式的网络管理体系结构,描述了网管协议的设计,阐发了具体方案的实施.该系统大大提高了网络的运营效益.     

国航货运计算机系统的网络设计

介绍了国航货运计算机系统的网络拓朴结构、网络需求和网络设计思想.如何使SITA网络和本地局域网连接,解决SNA/LAN的互联方案.     

机载信息系统的应用研究及发展趋势初探

介绍了机载信息系统的技术现状,在民机上的不同应用架构及各种架构所具有的特点。从市场定位、新老机型应用、技术融合程度、人机工效等方面对机载信息系统的应用进行了研究,并根据机载系统产品发展的一般规律,对未来机载信息系统的发展趋势进行了初步预测。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.