Flexible spacestructure control via moving-bank multiple modelalgorithms

The development and performance of moving-bank multiple model adaptive control (MMAC) algorithms for quelling vibrations induced in the SPICE 2 space structure are presented. The structure consists of a large platform and a smaller platform connected by three legs in a tripod fashion. Deviations of the line-of-sight (LOS) vector from the center of the large platform to the center of the smaller platform are used for LQG controller performance evaluation. The parameter estimator implements the maximum entropy with identity covariance (ME/I) algorithm; the moving-bank logic employs parameter position monitoring; the controller uses the modified MMAC method. Whereas parameter variations of two percent caused instabilities in the single filter/controller design, the MMAC algorithm provides an excellent method to estimate a wide range of parameter variations and to quell oscillations in the structure     

基于FPGA的自适应陷波器研究和设计

对基于FPGA的自适应滤波器进行了研究.首先,分析了最小均方根(LMS)算法原理,并介绍了陷波器的稳定性问题.然后,提出了一种基于FPGA的自适应滤波器的实现方法,并进行了仿真验证.最后搭建了试验平台验证了陷波器的功能.仿真和试验结果表明,该自适应陷波器有良好的滤波功能.     

星载平面可展天线支撑桁架的结构效率优化

针对折展结构性能存在多指标且这些指标之间又相互制约的特点,把结构效率引入到可展结构的优化设计中,应用多因素正交试验法对一种空间可展开平板天线支撑桁架的优化问题进行了研究。对其关键几何设计参数进行了分析,建立了桁架结构的优化数学模型,以结构效率最大化作为优化目标,对可展桁架进行了结构优化,得到了支撑桁架各杆件的设计参数。结果表明:结构效率综合考虑了质量和刚度的影响,使结构质量和刚度同时得到优化;长宽比(l/w)是影响可展桁架结构性能的主要因素,对不同优化目标产生影响的次要因素有所不同;截面积对结构效率影响不显著(置信度p=90%),在相同杆长参数配置下,等截面可展桁架的结构效率仅次于变截面方案,但工程经济性最佳。该研究方法有助于在概念设计阶段从系统设计的角度进行空间桁架结构的快速设计与优化。     

Configuration synthesis of planar folded and common overconstrained spatial rectangular pyramid deployable truss units

Compared with non-overconstrained deployable units, overconstrained deployable units are widely used in space missions for their higher stiffness characteristics. Besides the performance of a three-step topological structural analysis and design of the rectangular pyramid deployable truss unit(PDTU), conducting a structural synthesis of an overconstrained deployable unit requires the determination of the relative position and direction of each kinematic axis. The structural synthesis of an overconstrained deployable unit is investigated based on screw theory and its topological structure. The possible overconstrained cases of the rectangular PDTUs are analyzed, and corresponding screw expressions are obtained. Thus, the rectangular PDTUs, which can be folded into a plane, are synthesized systemically, and a series of overconstrained rectangular PDTUs is obtained. Furthermore, the feasibility of the folded and deployed motions under one degree of freedom for those deployable units is verified in dynamical simulation by using ADAMS 2010.     

广义预测自适应控制器在导弹控制系统设计中应用

将一种新的广义预测自适应控制算法应用于快速时变的导弹控制系统设计中。讨论了设计参数对控制系统性能的影响;针对自适应控制信号过大,提出了改进方案,增强了系统的鲁棒性和抗干扰能力。大量的数字仿真结果表明:运用该方案设计的导弹控制系统具有很好的跟踪性能和强的抗干扰能力;对系统阶次、参数、时延和采样周期的变化具有很强的鲁棒性;自适应算法中,对验前知识要求少,实现起来也比较简单。     

高超声速飞行器气动伺服弹性的自适应抑制

针对弹性高超声速飞行器的气动伺服弹性问题，提出一种结合线性自抗扰和自适应陷波器的综合控制方案。针对强耦合和强不确定性问题，采用线性自抗扰控制对总扰动进行快速估计和补偿。为了在最小化对刚体控制性能影响的同时实现对频率未知且时变的弹性模态的抑制，采用能够在线估计弹性频率的自适应陷波器。根据气动伺服弹性抑制问题的特点提炼出对自适应陷波器的性能需求。针对这些需求设计了两种基于递推最大似然法的多频率直接辨识方案——参数单独自适应和同时自适应方案。为了提高辨识算法在各种随机扰动下的鲁棒性，在此基础上提出一种在线有效性监督机制，并通过大量的数字仿真对两种方案进行了性能对比。最后，在弹性高超声速飞行器模型上进行仿真，仿真结果验证了所提控制方案的有效性。     

电液力伺服系统的神经网络并行自适应预测 PI 控制

考虑电液伺服系统的复杂非线性和不确定性特性,提出一类基于神经网络的并行自适应预测PI控制结构,该结构使控制参数的调整和系统的实时控制操作可并行进行,不仅做到了神经模型和控制器的在线辨识和设计,而且避免了神经网络方法通常存在的实时控制的困难,使复杂系统的在线学习控制成为可能。仿真结果表明该控制器具有良好的适应性和鲁棒性。      

基于apFFT的罗兰-C窄带干扰频域抑制方法

针对现有罗兰-C接收机普遍采用固定陷波电路抑制窄带干扰的情况,提出了基于全相位谱分析(apFFT)的频域精确自适应陷波罗兰-C窄带干扰抑制方法,设计了基于双相移组合全相位法的FIR频域陷波器。在对窄带干扰进行精确谱分析的基础上,设计相应频点的陷波器对多个窄带干扰进行抑制。基于MATLAB的仿真结果表明:该方法能够根据罗兰-C窄带干扰频率的变化,实现频点任意控制的频域自适应陷波,有效恢复出罗兰-C信号,为增强型罗兰-C接收机的设计提供了一种简单有效的窄带干扰抑制方法。     

基于自适应模糊系统的空天飞行器非线性预测控制

 针对一类多输入多输出非线性不确定系统,提出了基于自适应模糊系统的非线性预测控制方法。控制器由基于模糊系统的非线性预测控制器和鲁棒自适应控制器两个部分组成。根据系统的跟踪误差在线调整模糊系统的权值,使得模糊系统一致逼近被控对象中的非线性函数,通过泰勒展开设计出基于模糊系统的非线性预测控制律,避免了预测控制在线优化带来的繁重的计算负担。鲁棒自适应控制器则用于减少不确定和模糊逼近误差对系统的影响。所设计的控制器保证了闭环系统的最终一致有界稳定。基于Lyapunov稳定原理,给出了理论证明和分析。最后利用提出的控制方案设计了空天飞行器高超声速飞行姿态的控制系统,仿真结果表明了控制方案的有效性。     

PID Controller Optimization by GA and Its Performances on the Electro-hydraulic Servo Control System

A proportional integral derivative （PID） controller is designed and attached to electro-hydraulic servo actuator system （EHSAS） to control the angular position of the rotary actuator which control the movable surface of space vehicles. The PID gain parameters are optimized by the genetic algorithm （GA）. The controller is verified on the new state-space model of servo-valves attached to the physical rotary actuator by SIMULINK program. The controller and the state-space model are verified experimentally. Simulation and experimental results verify the effectiveness of the PID controller adaptive by GA to control the angular position of the rotary actuator as compared with the classical PID controller and the compensator controller.     

Adaptive control and stabilization of elastic spacecraft

This work treats the question of large angle rotational maneuver and stabilization of an elastic spacecraft (spacecraft-beam-tip body configuration). It is assumed that the parameters of the system are completely unknown. An adaptive control law is derived for the rotational maneuver of the spacecraft. Using the adaptive controller, asymptotically decoupled control of the pitch angle of the space vehicle is accomplished, however this maneuver causes elastic deformation of the beam connecting the orbiter and tip body. For the stabilization of the zero dynamics (flexible dynamics), a stabilizer is designed using elastic mode velocity feedback. In the closed-loop system including the adaptive controller and the stabilizer, reference pitch angle trajectory tracking and vibration suppression are accomplished. Simulation results are presented to show the maneuver capability of the control system     

Adaptive feedback control of stability in an axial compressor with circumferential inlet distortion

The adaptive feedback control of stability with circumferential inlet distortion has been experimentally investigated in a low-speed, axial compressor. The flat-baffles with different span heights are used to simulate different distorted inflow cases. Compared with auto-correlation and root-mean-square analysis, cross-correlation analysis used to predict early stall warning does not depend on the distortion position. Hence, the cross-correlation coefficient was used to monitor the stable status of the compressor and provide the feedback signal in the active control strategy when suffering from different distortions. Based on the stall margin improvement of tip air injection obtained under different distorted inflow cases and the sensitivity analysis of cross-correlation coefficients to injected momentum ratios, tip air injection was adopted as the actuator for adaptive feedback control. The digital signal processing controller was designed and applied to achieve adaptive feedback control in distorted inflow conditions. The results show that the adaptive feedback control of air injection nearly achieves the same stall margin improvement as steady air injection under different distortion intensities with a reduced injection mass flow. Thus, the proposed adaptive feedback control method is ideal for the engine operation with circumferential distorted inflow, which frequently occurs in flight.     

主被动复合驱动空间探测柔性伸杆机构的参数匹配

基于主被动复合驱动的思想提出一种大伸展/收拢比、高载荷/自重比的新型伸缩式伸杆机构,以满足微纳探测器的实际应用需求,用于支撑各类探测载荷远离航天器本体,避免本体剩磁对空间待测信号的干扰,保证探测数据的准确性。首先,探索描述被动驱动源（弹簧铰链）的力矩驱动特性;然后,分析柔性伸杆的弯曲、扭转、压平和卷曲等力学性能。在此基础上,结合建立的柔性伸杆伸展速度、负载动能、弹簧铰链势能及主动驱动（电动机）力矩等参数的能量流约束方程,进行主、被动驱动和柔性伸杆的参数匹配研究;最后,利用有限元软件仿真和样机平台实验验证了参数匹配的合理性。仿真与实验结果表明,针对主被动复合驱动的空间探测柔性伸杆机构,通过合理的参数匹配,可实现柔性伸杆无褶皱地平稳伸展和收拢,为后续的机构设计和控制方案奠定了基础。     

主被动复合驱动空间探测柔性伸杆机构的参数匹配简

 基于主被动复合驱动的思想提出一种大伸展/收拢比、高载荷/自重比的新型伸缩式伸杆机构,以满足微纳探测器的实际应用需求,用于支撑各类探测载荷远离航天器本体,避免本体剩磁对空间待测信号的干扰,保证探测数据的准确性。首先,探索描述被动驱动源（弹簧铰链）的力矩驱动特性;然后,分析柔性伸杆的弯曲、扭转、压平和卷曲等力学性能。在此基础上,结合建立的柔性伸杆伸展速度、负载动能、弹簧铰链势能及主动驱动（电动机）力矩等参数的能量流约束方程,进行主、被动驱动和柔性伸杆的参数匹配研究;最后,利用有限元软件仿真和样机平台实验验证了参数匹配的合理性。仿真与实验结果表明,针对主被动复合驱动的空间探测柔性伸杆机构,通过合理的参数匹配,可实现柔性伸杆无褶皱地平稳伸展和收拢,为后续的机构设计和控制方案奠定了基础。     

A Backstepping Simple Adaptive Control Application to Flexible Space Structures

Although the simple adaptive control (SAC) is widely studied both in theory and application in flexible space structure control and other control problems, it is restricted by the almost strictly positive real (ASPR) conditions. In most practical control problems, the ASPR conditions are not satisfied. Therefore, based on the SAC theory, this paper proposes a backstepping simple adaptive control algorithm which suits the system with arbitrary relative degree with no need of parallel feedforward compensator. The proposed control algorithm consists of decomposition of the arbitrary relative degree system into a known subsystem and an unknown ASPR subsystem which are connected in cascade, design of constant output feedback controller for the known subsystem, and implementation of backstepping method and SAC of the unknown ASPR subsystem. Inheriting the characteristics of the SAC, this method can be adaptive online for the parameter uncertainties. Then, the application of the proposed controller to large flexible space structure with collocated sensors and actuators is studied, and the simulation results validate the proposed controller. It is a new strategy to apply the classical SAC to high relative degree plants.     

Adaptive control strategies for flexible space structures

The problem of controlling flexible space structures in the presence of significant uncertainties using only position measurements is considered. Adaptive controllers, which are capable of controlling partially known dynamical systems and delivering good performance by providing a time-varying compensation on-line, are desirable for such system. We present an adaptive controller which can globally stabilize a class of flexible structures. This controller is applicable whether position measurements, rate measurements, or combinations thereof are available, as well as for colocated and noncolocated actuator-sensor pairs that are sufficiently close. The improvement in performance generated using such controllers is demonstrated using two practical structural system     

Structural design and model fabrication of cable-rib tensioned deployable parabolic cylindrical antenna

Deployable mechanisms with light weight and high storage ratio have received considerable attention for space applications. To meet the requirements of space missions, a parabolic cylindrical deployable antenna based on cable-rib tension structures is proposed and verified by a physical prototype. The parabolic cylindrical antenna adopts simple parallel four-bar mechanisms to construct the basic deployable unit, and the cylindrical direction dimension can be easily extended by modularization, which has obvious advantages in storage ratio and area density. Considering the complexity of the entire antenna structure design, including cable networks and flexible trusses, the form-finding design optimization model of a parabolic cylindrical antenna is established using the force density sensitivity method, and then the kinematics analysis of the deployable mechanism is carried out. Finally, a single-module prototype with a deployable diameter of 4 m × 2 m was designed and fabricated. The results of the ground deployment process test and surface accuracy measurements show that the antenna has good feasibility and practicability.     

改进型滑模变结构电机控制的脉振电流注入法研究

为了提高永磁同步电机无位置传感器技术的控制性能,在电机动态品质优化的研究中,以滑模变结构控制器替代传统的PI控制器,采用新型趋近律函数改进滑模控制器的输出模型,削弱了传统滑模控制存在的抖振,提高了控制系统的抗干扰能力。在分析无位置传感器技术时,引入高通谐振滤波器,采用具备以高信噪比为特点的两相静止坐标系下高频脉振电流注入法。仿真结果表明,在带高通谐振滤波器的高频脉振电流注入法中运用滑模变结构控制器,提高了转子位置估计的精度,增强了控制系统的鲁棒性。     

An improved LMS adaptive algorithm for narrowband interferencesuppression in direct sequence spread spectrum

In 1990 Vijayan and Poor proposed nonlinear predictive methods for suppressing narrowband interference in spread spectrum (SS) systems with a significant increase in signal-to-noise ratio (SNR) improvement. The main drawback of their adaptive nonlinear filter is its slow convergence rate. A new adaptive least mean squares (LMS) algorithm to increase the slow convergence of their nonlinear adaptive filter is described. Computer simulation results are presented to support the advantages of the new filter     

空间绳系机器人捕获目标后的面内自适应回收方法

在空间绳系机器人(TSR)捕获目标星后,操作机构与目标星形成质量、惯量和系绳连接点位置等参数未知的组合体,且系绳长度、偏角与组合体姿态严重耦合,控制输入严格受限,回收控制十分困难。针对其回收难题,综合考虑系绳长度、系绳偏角与组合体姿态,利用拉格朗日法建立了轨道面内的动力学模型,并基于动态逆理论设计了一种自适应抗饱和回收控制方法。首先,在对组合体质量、惯量与系绳连接点进行在线估计的基础上,设计一种自适应动态逆回收控制器;然后,设计辅助变量对控制输入进行补偿,解决控制输入受限问题;最后进行仿真验证。仿真结果表明,在线估计器能够快速有效地估计组合体动力学参数,回收控制系统能够利用受限的控制输入克服抓捕时刻的系绳偏角和组合体姿态扰动,并沿设计的回收轨迹实现稳定有效回收。