机载MIMO雷达空时自适应杂波对消器

针对机载多输入多输出(MIMO)雷达杂波分布呈现空时耦合特性,提出一种空时自适应杂波对消器.利用机载MIMO雷达的脉冲回波数据,构造杂波对消器的系数矩阵.通过空时自适应杂波对消器的预处理,可以有效地抑制杂波,并通过与常规空时处理算法的级联,最终可以有效提高动目标的检测性能.实现了由传统地基雷达杂波对消器向机载运动平台的推广.仿真结果表明,这种自适应杂波对消器不仅适用于正侧视雷达,对于非正侧视雷达也同样适用.     

False-Alarm Regulation in Log-Normal and Weibull Clutter

Automatic detection radars require some method of adapting to variations in the background clutter in order to control their false-alarm rate. Conventional cell-averaging techniques designed to maintain a constant false-alarm rate in Rayleigh clutter will fail to control the false-alarm rate in more severe clutter environments such as log-normal or Weibull clutter. A processor is described which is capable of maintaining false-alarm regulation in log-normal clutter and in Weibull clutter (and, under certain conditions, over the entire family of log-normal and Weibull distributions).     

Detection probability using relative clutter in infrared images

Clutter plays a very important role in the area of machine and human-in-the-loop target acquisition. A great deal of interest has recently been shown in assessing several different definitions of clutter. In spite of so many definitions available, no single clutter definition has been agreed on by the target acquisition modeling community as being the best. Here we develop a new clutter metric, called relative clutter, based on factor analysis which is extensively used for statistical analysis. This relative clutter combines many definitions of clutter. Different methods for calculating the relative clutter based on the magnitude of the eigenvalues obtained from the correlation matrix are suggested. The relative clutter of many images is analyzed. The relative clutter is used to calculate probability of detection on Night Vision Lab (NVL) Terrain Board Infrared images     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

Radar detection in clutter

Clutter is defined as any unwanted radar return. The presence of clutter in a range/Doppler cell complicates the detection of a target return signal in that cell. In order to quantify the effect of clutter on the probability of detection, we must first specify sets of models suitable for representing the clutter and target. The simplest and most common model for clutter is based on the gamma density. We include two additional models, the NCG and NCGG clutter models for low grazing angles. They are motivated by physical arguments, the latter of which can accommodate the well-known phenomenon of speckle. Using one of these models for clutter together with one of several models for targets, we determine, in a range/Doppler cell, expressions for probabilities of detection of a target in the presence of clutter. It is important to control the probability of false alarms. The presence of clutter in a cell necessitates an increase in the detection threshold setting in order to control false alarms, thus lowering the probability of detection. If the clutter level is unknown, then we need to take measurements of the clutter and use it to adjust the threshold. The more clutter samples we take, the better the estimate of the clutter level and the less is the resulting detection loss. Using the expressions for the probability of detection in clutter, we can quantify the detection loss for a pair of commonly used constant false-alarm rate (CFAR) techniques and investigate how the loss varies with different parameter values, especially with regard to the number of clutter samples taken to estimate the clutter level.     

Matched subspace CFAR detection of hovering helicopters

A constant false alarm rate (CFAR) strategy for detecting a Gaussian distributed random signal against correlated non-Gaussian clutter is developed. The proposed algorithm is based on Scharf's matched subspace detector (MSD) and has the CFAR property with respect to the clutter amplitude probability density function (apdf), provided that the clutter distribution belongs to the compound-Gaussian family and the clutter covariance matrix is known to within a scale factor. Analytical expressions of false alarm and detection probabilities are derived. An application to the problem of detecting hovering helicopters against vegetated ground clutter is reported     

Radar Properties of Non-Rayleigh Sea Clutter

Measurements of sea clutter at low grazing angles using high- resolution radar show that the probability density p(x) of envelope detected sea clutter is not Rayleigh. Using the composite surface scattering model, a special varying clutter density p(x|?0) is proposed and is used to explain the non-Rayleigh nature of clutter. Since the clutter distribution has an enormous effect on the performance of a radar, the variation of the clutter densities, p(x) and p(x|?0), with various radar parameters such as frequency, pulsewidth, and polarization is found. Finally, a simulation of the composite surface scattering model is performed, and it verifies the effect of the various parameters on p(x).     

Adaptive Radar Detection in Doubly Nonstationary Autoregressive Doppler Spread Clutter

The problem of adaptive radar detection in clutter which is nonstationary both in slow and fast time is addressed. Nonstationarity within a coherent processing interval (CPI) often precludes target detection because of the masking induced by Doppler spreading of the clutter. Across range bins (i.e., fast time), nonstationarity severely limits the amount of training data available to estimate the noise covariance matrix required for adaptive detection. Such difficult clutter conditions are not uncommon in complex multipath propagation conditions where path lengths can change abruptly in dynamic scenarios. To mitigate nonstationary Doppler spread clutter, an approximation to the generalized likelihood ratio test (GLRT) detector is presented wherein the CPI from the hypothesized target range is used for both clutter estimation and target detection. To overcome the lack of training data, a modified time-varying autoregressive (TVAR) model is assumed for the clutter return. In particular, maximum likelihood (ML) estimates of the TVAR parameters, computed from a single snapshot of data, are used in a GLRT for detecting stationary targets in possibly abruptly nonstationary clutter. The GLRT is compared with three alternative methods including a conceptually simpler ad hoc approach based on extrapolation of quasi-stationary data segments. Detection performance is assessed using simulated targets in both synthetically-generated and real radar clutter. Results suggest the proposed GLRT with TVAR clutter modeling can provide between 5–8 dB improvement in signal-to-clutter plus noise ratio (SCNR) when compared with the conventional methods.     

Nonparametric rank detectors under K-distributed clutter in radar applications

This correspondence deals with a comparative analysis of parametric detectors versus rank ones for radar applications, under K-distributed clutter and nonfluctuating and Swerling II target models. We show that the locally optimum detectors (LODs) (optimum for very low signal-to-clutter ratio (SCR)) under K-distributed clutter are not practical detectors; on the contrary, asymptotically optimum detectors (optimum for high SCR) are the practical ones. The performance analysis of the parametric log-detector and the nonparametric (linear rank) detector is carried out for independent and identically distributed (IID) clutter samples, correlated clutter samples, and nonhomogeneous clutter samples. Some results of Monte Carlo simulations for detection probability (P/sub d/) versus SCR are presented in curves for different detector parameter values.     

区域杂波估计的多目标跟踪方法

高斯粒子概率假设密度（PHD）滤波往往假定杂波密度参数已知,这种做法对于实际应用是不现实的。此外,杂波的参数值通常依赖于环境条件,可能随时间发生变化。因此,多目标跟踪算法中需要实时准确估计杂波密度的参数。基于此,提出了一种多目标跟踪的区域杂波估计方法。首先根据量测信息在线估计出场景中的杂波数目,然后估计落入目标附近感兴趣区域的杂波数,并估计每个目标感兴趣区域杂波强度。仿真结果表明,在复杂场景下算法的跟踪性能明显优于未进行杂波估计的多目标跟踪算法,提高了跟踪的实时性和跟踪精度。     

Optimal CFAR detection in Weibull clutter

Optimal, in the maximum likelihood sense, constant false-alarm rate (CFAR) detection for Weibull clutter statistics, is investigated. The proposed OW (optimal Weibull) estimator is proved to be an asymptotically efficient estimator of the mean power of the Weibull clutter. Theoretical analysis of the OW-CFAR detector is provided, while detection performance analysis is carried out using the Monte Carlo simulation method. The operation of the median and morphological (MEMO)-CFAR detector in Weibull clutter statistics is also explained. It performs almost optimally in uniform clutter and, simultaneously, it is robust in multitarget situations. The performance of the proposed OW-CFAR detector in uniformal Weibull clutter is used as a yardstick in the analysis of the MEMO cell-averager (CA) and ordered statistic (OS) CFAR detectors. Nonfluctuating and fluctuating (Swerling II) targets are considered in detection analysis. The performance of the detectors is also examined at clutter edges     

一种基于角度-多普勒补偿的均匀圆形天线机载雷达杂波抑制方法

采用均匀圆形相控阵天线的机载雷达杂波分布随距离变化而变化,各距离单元的杂波不再满足独立同分布的条件,造成统计型空时自适应处理(STAP)器性能下降。基于此,本文建立了均匀圆形天线机载雷达模型,对其杂波分布进行了分析,得出了空间角随阵元数非线性变化的特性造成其杂波距离维分布非均匀的结论。研究了一种均匀圆形天线机载雷达杂波抑制方法,该方法先通过修正的角度 多普勒补偿(MADC)预处理消除在杂波谱中心处的非均匀,再利用基于导数更新(DBU)技术进一步减小在其他方位杂波的非均匀程度。仿真结果表明了该方法的有效性。     

Analysis of CFAR performance in Weibull clutter

Recent interest has focused on order statistic-based (OS-based) algorithms for calculating radar detection thresholds. Previous analyses of these algorithms are extended, to determine closed-form approximations for the signal-to-clutter ratio required to achieve a particular probability of detection in clutter environments whose amplitude statistics are modeled by the Weibull distribution, and where the clutter dominates receiver noise. Performance is evaluated in both homogeneous and inhomogenous clutter. The analysis shows that the OS-based algorithm is quite robust against both interference and clutter edges. A method is suggested for improving performance at clutter inhomogeneities for short-range targets     

一种简化的机载MIMO雷达杂波特征相消器

针对机载多输入多输出(MIMO)雷达杂波抑制问题,提出一种简化的杂波特征相消器(EC).根据杂波在空时二维平面的先验分布离线构造杂波子空间.以此替代由协方差矩阵特征值分解(EVD)得到的杂波子空间,从而将最优权简化为一个确知投影矩阵与目标信号空时二维导向矢量的乘积,避免了传统EC方法中复杂的协方差矩阵估计和EVD运算,...     

Airborne/spacebased radar STAP using a structured covariance matrix

It is shown that partial information about the airborne/spacebased (A/S) clutter covariance matrix (CCM) can be used effectively to significantly enhance the convergence performance of a block-processed space/time adaptive processor (STAP) in a clutter and jamming environment. The partial knowledge of the CCM is based upon the simplified general clutter model (GCM) which has been developed by the airborne radar community. A priori knowledge of parameters which should be readily measurable (but not necessarily accurate) by the radar platform associated with this model is assumed. The GCM generates an assumed CCM. The assumed CCM along with exact knowledge of the thermal noise covariance matrix is used to form a maximum likelihood estimate (MLE) of the unknown interference covariance matrix which is used by the STAP. The new algorithm that employs the a priori clutter and thermal noise covariance information is evaluated using two clutter models: 1) a mismatched GCM, and 2) the high-fidelity Research Laboratory STAP clutter model. For both clutter models, the new algorithm performed significantly better (i.e., converged faster) than the sample matrix inversion (SMI) and fast maximum likelihood (FML) STAP algorithms, the latter of which uses only information about the thermal noise covariance matrix.     

Nonlinear clutter cancellation and detection using a memory-basedpredictor

In this paper, a nonlinear prediction (NLP) method is proposed as an alternative to the conventional linear prediction (LP) method for clutter cancellation. Because of the nonlinearity and non-Gaussianity of a clutter process, a nonlinear predictor is therefore needed to suppress clutter optimally. A memory-based predictor which uses a table look-up strategy to perform NLP is used in this work. The advantages of the memory-based approach are fast learning, algorithmic simplicity, robustness and suitability for parallel implementation. The memory-based predictor is then used as an adaptive detector for small surface target detection embedded in clutter. The effectiveness of the new method is demonstrated using real sea clutter data, and the results show improvement when compared with the conventional LP techniques     

Generalized radar clutter model

A commonly used density model for radar clutter is chi-square for power, or, equivalently, Rayleigh for amplitude. However, for many modern high resolution radar systems, this density underestimates the tails of the measured clutter density. Log normal and Weibull distributions have proved to be better suited for the clutter in these high resolution radars. Generalizing the chi-square density by replacing it with the noncentral chi-square density and allowing the mean power level (the noncentrality parameter) to vary, we can both suitably shape the clutter density to produce larger tails and model the fluctuation of the average clutter power, commonly referred to as speckle. The resulting form, although appearing cumbersome, readily allows for efficient and accurate computations of the probability of detection in clutter     

A relative clutter metric

Clutter plays a very important role in the area of machine and human-in-the-loop target acquisition. A great deal of interest has recently been shown in assessing several different definitions of clutter. In spite of so many definitions available, no single clutter definition has been agreed on by the infrared community as being the best. We develop a new clutter metric, called relative clutter, which is based on factor analysis which is extensively used for statistical analysis. This relative clutter combines many definitions of clutter. Different methods for calculating the relative clutter based on the magnitude of the eigenvalues obtained from the correlation matrix are suggested. The relative clutter of many images is analyzed     

基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法

杂波谱稀疏恢复空时自适应处理（STAP）是一种有效减少杂波样本数需求的机载雷达杂波抑制方法。然而,空时平面被离散地划分为若干个网格点来构建空时导向矢量字典,当字典在失配时,杂波脊不能准确落在预先离散化的网格点上,稀疏恢复STAP性能严重下降。提出了一种基于稀疏贝叶斯学习的字典失配杂波空时谱估计方法,首先利用二维泰勒级数建立空时动态字典模型,然后将字典失配误差作为待估超参数构建贝叶斯稀疏恢复模型,并利用失配误差估计值对空时导向矢量字典进行修正,最后利用修正后的空时导向矢量字典重构杂波协方差矩阵,进而计算杂波空时谱。实验证明,该方法能够有效提高字典失配情况下的杂波谱稀疏恢复精度,杂波抑制性能优于已有字典预先离散化的稀疏贝叶斯学习STAP方法。     

Stap using knowledge-aided covariance estimation and the fracta algorithm

In the airborne space-time adaptive processing (STAP) setting, a priori information via knowledge-aided covariance estimation (KACE) is employed in order to reduce the required sample support for application to heterogeneous clutter scenarios. The enhanced FRACTA (FRACTA.E) algorithm with KACE as well as Doppler-sensitive adaptive coherence estimation (DS-ACE) is applied to the KASSPER I & II data sets where it is shown via simulation that near-clairvoyant detection performance is maintained with as little as 1/3 of the normally required number of training data samples. The KASSPER I & II data sets are simulated high-fidelity heterogeneous clutter scenarios which possess several groups of dense targets. KACE provides a priori information about the clutter covariance matrix by exploiting approximately known operating parameters about the radar platform such as pulse repetition frequency (PRF), crab angle, and platform velocity. In addition, the DS-ACE detector is presented which provides greater robustness for low sample support by mitigating false alarms from undernulled clutter near the clutter ridge while maintaining sufficient sensitivity away from the clutter ridge to enable effective target detection performance