A Recursive Method for Signal Resolution

A recursive method is given for resolving signals overlapping in time. Assume that the signal waveform is known and several signals are received. The signals (of unknown number) may overlap with one another and the amount of time delay of each individual signal is unknown. The signals are corrupted with additive white Gaussian noise. The problem is to estimate the number, the amplitudes, and the time delays of the overlapping signals. Assume that at a certain instant tk-1 estimates have been made on the number of signals arriving in the time interval (O, tk-1) and the amplitudes and time delays of these signals. Using these estimates, we test at tk the hypothesis H1 that a new signal arrives at tk against the null hypothesis Ho that no new signal arrives. The decision gives the number of signals arriving in the time interval (0, tk); the parameters are then re-estimated. The overlapping signals are detected and resolved, and the estimates are improved at each stage. The system is analyzed in detail, and computer-simulated results are presented.     

飞机发动机混沌振动信号盲分离检测方法

发动机混沌振动信号携带着丰富的状态信息,依据混沌振动信号进行状态监测及故障诊断是一种很有前途的技术手段,但由于混沌信号具有伪随机特性及在低频段具有宽频谱等特点,使得传统的方法很难将其从振动信号中分离。在提取混沌振动信号方面,使用快速独立分量分析（Fast ICA）盲分离方法分离出飞机发动机振动信号中的混沌信号。利用功率谱和Lyapunov指数（LE）方法进行了判定,根据计算结果对发动机状态做出判断,验证了盲分离方法分离混沌振动信号的有效。盲分离检测混沌振动信号的方法不仅使依据混沌信号判断飞机发动机状态成为可能,也为利用混沌信号进行状态预测和控制提供了一种方法。     

应用独立分量分析提取液体火箭发动机的故障特征

以某型液体火箭发动机为研究对象，针对故障诊断中故障特征提取难的问题，提出了应用小波消噪技术和独立分量分析获取高品质源信号，并利用源信号进行故障诊断的思路，对发动机热试车压强信号进行了实例分析。研究结果表明，该方法提高了诊断信号的质量，有效地提取了故障特征。     

卫星测控直扩信号安全性能评价体系研究

为了定量评估直扩信号的安全性能,在给出卫星测控直扩信号安全防护定义的基础上,对卫星测控直扩信号安全性能评价指标进行了研究.在深入分析直扩信号典型威胁的基础上,提出了等效码长、调制指数、码速率截获因数、等效码长截获因数、码序列截获因数、干扰因数等衍生指标,分析、仿真了它们的影响因素,得到了它们与基本指标的关系,初步建立了直扩信号安全性能评价体系,为后续安全性能评估打下基础.     

谱估计测向的MUSIC算法研究

由天线阵对被测信号的响应矩阵的特征值,可得到对应于信号和噪声的特征向量,以此扩展成信号子空间和噪声子空间。利用信号子空间与噪声子空间的正交关系,即可求得信号方位角的估计值。这种空间谱估计测向的MUSIC算法,用于圆形天线阵对非相干信号进行测向,可以克服一般干涉仪测向体制中测向模糊和测向盲区的问题。     

Performance of a Modified Applebaum Adaptive Array

The performance of a modified Applebaum adaptive array is studied. The new array is obtained by removing the desired signal component from the output signal fed back to the correlator of an Applebaum type adaptive array. Various signal scenarios, including single desired signals or multiple simultaneous desired signals are examined. The new array is less sensitive to beam pointing errors and does not cause power inversion of desired signals. In the case of multiple simultaneous desired signals, the new array does not degrade the SNRs of strong desired signals.     

信号的复制生成理论及其在通信中的应用

信号的复制生成理论是基于复制方法生成信号的理论,它主要研究信号(序列)的复制特性、在不同的复制信息和复制方式下信号(序列)的生成原理和性质。在简要介绍信号的复制生成理论的基础上,着重介绍了利用复制理论提出的一种新的伪随机码捕捉方法。     

Test Results with an Experimental Direction-Finding System

A direction-finding system was built that can simultaneously estimate the arrival angles of two incident signals. It is conceptually straightforward to extend the system to cases with greater numbers of signals. The system is designed to work with uncorrelated signals whose form is unknown, e.g., two communications signals residing in the same bandwidth. Pulsed as well as continuous signals can be handled. The technique involves the determination of the received signal's correlation matrix as an intermediate step. Pattern range tests were performed to determine angle estimate bias and accuracy.     

基于小波变换的非平稳信号趋势项剔除方法

分析了空间飞行器遥测信号处理传统趋势项剔除方法的优势和不足,提出了基于小波变换的非平稳信号趋势项剔除方法。这种方法通过滤波器组将信号分解与重构,实现趋向性信号与零均值平稳随机信号的分离。仿真实验表明,该方法简单、高效,适用于非平稳随机信号的处理,是一种实用的趋势项剔除方法。     

一种圆锥运动条件下的等效旋转矢量算法研究

传统旋转矢量姿态算法一般采用陀螺的角增量信号来构造积分算法,当应用于输出为角速率的光纤陀螺捷联系统时,通过角速率提取角增量,算法会损失一定精度。提出了一种以陀螺角速率信号与角增量信号同时作为输入的改进旋转矢量姿态算法,进一步补偿了圆锥误差,提高了计算精度。仿真结果表明,该算法与传统二子样算法相比较,计算量相当,姿态精度、速度精度、位置精度有大幅度的提升。     

基于概率统计的DS/FH系统干扰检测算法

基于时频分布的干扰检测算法是DS/FH（Direct Sequence/Frequency Hopping,直接序列扩频/跳频扩频）系统干扰检测的传统手段,针对其运算量大、实时性差,以及无法检测某些特殊干扰信号等问题,提出一种基于概率统计的干扰检测算法.通过统计DS/FH系统频谱图中各频率的幅值出现位置,以DS/FH信号与干扰信号频谱分布规律的差别为判决依据,完成DS/FH系统中干扰信号的检测.分析和仿真结果表明：该检测算法能够有效识别DS/FH系统中的典型干扰信号,与传统基于时频分布的检测算法相比,能够实现某些特殊干扰信号的有效检测;同时,由于该算法不需要进行复杂的时频联合分析,其运算复杂度大大降低,能够实现DS/FH系统干扰信号的快速检测.     

Time-Frequency HOP Signals Part II: Coding Based upon Quadratic Congruences

High-efficiency multicomponent signals for maximization of signalto-noise ratio are investigated. Maximization of signal-to-noise ratio in colored noise requires control of volume distribution of the signal ambiguity function and transmission of unity efficiency signals. Signal efficiency is defined as the ratio of average power to the peak power. It is concluded that the signals must be frequency hop pulse trains. Quadratic congruences are chosen to place the components in time-frequency space. The number-theoretic properties of these signals provide bounds on the position and amplitude of the various peaks of the signal ambiguity function. The tradeoffs are shown between volume removal, number of component signals, and the time-bandwidth product.     

Basic Concepts in the Processing of SARSAT Signals

Search and rescue satellite-aided tracking (SARSAT) involves the use of satellites in low-polar orbits which relay the emergency signals of distressed vehicles to an earth station for signal analysis. In this paper, we present some basic concepts and a theoretical analysis of the spectra produced by coherent and noncoherent emergency locator transmitter signals. It is shown that coherent signals can be easily processed using linear spectral analysis. Noncoherent signals, however, require more advanced methods.     

含噪声的转子碰摩混沌信号分类识别

采用基于竞争学习和聚类分析的学习向量量化 ( LVQ)方法 ,研究转子碰摩混沌响应信号的神经网络分类识别问题 ,给出了相应的理论分析和计算结果 ,着重研究了 LVQ网络在不同噪声时的识别情况。分析结果表明 ,该方法可以实现转子碰摩混沌信号与其它响应信号的分类识别 ,并且具有良好的抗噪性能 ,为转子碰摩混沌信号的分类识别提供了一种较为直接的实时处理方法。     

基于频域CLEAN和谱图-Radon变换的SAR运动目标检测算法

谱图-Radon变换可有效地检测多个线性调频信号,当多个线性调频信号的能量相差较大时,谱图-Radon变换就很难将所有的信号检测出来。为了解决这个问题,文中提出了基于频域CLEAN的检测技术与谱图-Radon变换相结合。使用检测能量相差较大的多个线性调频信号的方法。这种方法可以有效地检测出所有的信号,具有较大的实用价值,仿真实验结果表明这种算法是有效的。     

单片机在船舶位置测控系统中的应用

介绍一种以AT89C55／51单片机为核心的主从机船舶位置控制系统。驾驶员在船长室通过键盘给定理想航向信号，选择航向传感器一电罗经测出实际航向信号，将这两个信号进行运算和处理，然后发出理想的舵偏转角信号给从机。从机安装在舵机所在现场，由精密电位器测出实际的航角信号，从机将其与理想的舵角信号进行比较，并发出控制步进电机转动的信号，从而系统快速可靠地实现船舶位置的串级控制。主从机之间的通信以RS-422标准实现。文中介绍了该系统的结构，详细分析系统原理并给出软件框图。     

Digital channelized receiver based on time-frequency analysis for signal interception

A digital channelized receiver is presented for the interception of a wide variety of signals of complex structure, including those with low probability of interception. The receiver is designed from the perspective of the time-frequency analysis. It uses an extended time-frequency representation based on the noncoherent integration of the short-time Fourier transform (STFT) on which the detection system and the encoder work. The encoder includes robust frequency estimation, automatic modulation recognition, and clustering, to handle broadband and simultaneous signals and to prevent out-of-channel detections (a typical phenomenon in channelized receivers). The receiver has been evaluated for a wide range of signals and shows a good performance in terms of detection, estimation, and processing of simultaneous signals. Signals collected from real-life systems and synthetic signals have been utilized.     

基于Birge-Massart阈值降噪与EEMD及谱峭度的滚动轴承故障特征提取

针对传统共振解调方法易受噪声干扰导致故障特征提取效果不佳的问题,提出了一种基于Birge-Massart策略的阈值降噪与集成经验模态分解(EEMD)和快速谱峭度算法相结合的滚动轴承故障特征提取方法。对原始故障信号进行EEMD并采用峭度准则筛选出含有故障信息的本征模态函数(IMF)分量;采用Birge-Massart策略和快速谱峭度对故障信号进行滤波降噪;对滤波后信号进行Hilbert包络解调,提取轴承故障特征。采用该方法分别对仿真信号和实验信号进行特征提取,结果表明该方法可以有效提高故障信号信噪比,清晰准确地获取轴承内、外圈故障的频率特征。利用峭度因子准则筛选IMF分量能有效保留原始故障信号中的冲击特征,去除无关IMF分量的影响。      

基于层次分析法的直扩信号安全性能评估模型

在综合直扩信号风险分析、截获方法的基础上，率先对直扩信号安全性能评估模型进行了研究，建立了基于AHP（AnalyticHierarchyProcess，层次分析法）的直扩信号安全性能评估模型，详细给出了直扩信号安全指数的计算过程，并对多种直扩信号的安全指数进行了仿真。仿真结果袁明：评估方法有效；提出的模型可以定量评价不同直扩信号的安全性能，为直扩信号的安全性设计提供定量的依据。此外，还提出了卫星测控直扩信号的安全等级分类原则和卫星安全等级要求。     

基于CEEMDAN降噪与双谱分析的滚动轴承故障诊断

滚动轴承早期故障信号中的噪声成分会影响到故障特征的提取。为了提高含噪故障信号中滚动轴承早期故障特征提 取的准确性，将基于自适应噪声的完备经验模态分解（CEEMDAN）用于滚动轴承振动信号的降噪中，并对降噪后的轴承故障信号 进行双谱分析。结果表明：CEEMDAN可有效去除轴承振动信号中的低频噪声干扰，经CEEMDAN降噪后的不同轴承故障信号的 双谱全局图存在明显差异，根据这些差异可在宏观上对不同轴承故障加以区分；通过经CEEMDAN降噪后的不同轴承故障信号的 双谱细节图可以正确提取不同轴承故障的特征频率，从而实现对各轴承故障的有效诊断。CEEMDAN降噪结合双谱分析可为滚 动轴承故障诊断提供一种新的有效方法。