基于谷歌地球的仪表飞行程序

在Google Earth的三维地形数据的基础上,建立了完整的计算机辅助仪表飞行程序设计系统,在GoogleEarth上绘制出飞行程序保护区。并建立机场数据库,存储机场数据以及保护区各重要位置点数据,导入AUTOCAD,完成AUTO CAD出图。实现计算机辅助飞行程序设计。     

多弹编队飞行控制技术研究

针对未来复杂战场环境下反舰导弹编队协同攻击的技术需求,提出了一种多弹编队飞行控制的技术方案。采用基于分层递阶控制思想的多智能体系统结构,把多枚功能相同或者不同的导弹按照一定的原则组合成弹群,弹群中各导弹之间进行编队飞行、协同搜索、信息融合和协同攻击等方面的作战配合,实现对单个目标或多个目标的精确打击。该方案可以实现多发导弹的编队飞行控制,能够提高导弹编队的体系对抗能力。     

推力矢量飞机自适应控制系统仿真平台研究

研究了具有自修复功能的推力矢量飞机自适应控制系统的结构功能特点,研究了RHO优化控制算法实现在线控制器设计,利用MSLS辨识算法实现在线飞行参数辨识和等价空间算法、传感器信息融合技术和概率统计理论实现FDI算法。并且根据系统各个部分的算法,采用面向对象技术语言VC 6.0和三维图形语言OpenGL开发了仿真平台,利用仿真平台实时演示了飞机存在舵面故障情况下的飞行控制系统运行仿真,解决了飞机飞行过程中存在舵面损伤和气动参数变化的问题,该仿真平台可以根据需求进行飞机故障加载,具备完备的推力矢量飞机自适应控制系统仿真功能。     

3D飞行音效仿真系统设计技术研究

针对3D飞行音效仿真系统的特点与系统需求,提出了3D飞行音效仿真系统的详细设计方案,从硬件设计与软件设计两个方面详述了此方案,重点对3D飞行音效仿真技术实现原理与实现方法进行了阐述。通过测试,证明该系统满足了任务需求、优化了系统架构,具有很强的移植性和扩展性。     

BVR空战仿真中具有分层学习能力的CGF实体行为仿真框架设计

针对超视距协同空战仿真是一个复杂系统的仿真特点,通过对预警机指挥引导下的多机协同空战过程的分析,建立了超视距多机协同空战行为功能框架,总结出多机协同空战过程中的影响因素。在分析了现有各种CGF系统体系结构及行为仿真框架基础上,结合超视距空战过程中各作战阶段的特点,建立了具有分层学习能力的编队协同空战自主兵力系统FCAF(Formation and Cooperative Air Combat Autonomous Force System,编队协同空战自主兵力系统)行为仿真框架,并给出了该行为仿真框架组成模块的形式化描述。仿真系统应用表明,在该框架中作战行为可以分解为一系列具有经验学习功能的行为基,并且各行为基可以重新组合,全面诠释了协同作战行为仿真的作战过程。     

三维实时动画技术在运载火箭飞行视景仿真中的应用

介绍了三维实时动画技术实现飞行器视景仿真的基本原理,并介绍了如何在SGI图形工作站及OPenGL图形库支持下开发运载火箭飞行视景仿真软件,重点介绍了三维实时动画技术在该系统中的软件实现。     

多无人机协同编队飞行控制的研究现状

多无人机（UAVs）编队飞行的协同侦察、作战模式可以在一定程度上提高单机单次作战任务的成功概率,因而引起各国对多机编队飞行的研究热潮。针对这一情形,在介绍了多UAV协同编队飞行（CFF）的定义和应用特点的基础上,结合近年来国内外多UAV编队飞行的发展状况和一些主要的研究成果,着重分析和讨论了编队飞行控制中几个相关的关键技术问题,主要包括：队形设计、气动耦合、队形的动态调整、航迹规划、信息互换以及编队飞行控制策略等问题;最后对未来的发展趋势进行了展望。研究成果对正在研究的多机作战平台系统的协同作战技术具有一定的参考意义。     

基于多智能体的无人作战平台多机协同对抗多目标任务决策方法

建立了基于多智能体的多机协同作战任务决策方法结构模型,提出了基于神经网络与证据理论的敌我双方对抗态势分析方法和基于完全信息静态博弈模型的多机协同对抗多目标任务决策方法,并进行了基于典型作战想定的多机协同对抗多目标任务决策方法仿真研究.     

一种多任务仿真系统及其在过失速评估中的应用

为研究新一代战机的过失速特性、作战效能和空战战法等不同需求,提出了能够灵活适应多任务需求的柔性仿真系统.基于敏捷仿真系统概念和框架,将仿真系统中的各模型单元设计为一系列自治的服务模型.通过描述契约定义可重用的仿真资源,亦即“服务”,并可被机器处理.仿真系统被描述成系统层面上描述契约的组合.根据该开发方法实现多任务柔性仿真系统,支持研究飞行品质、空战战法和多机空战,并且易于扩展和适配后续变化的需求.利用该系统进行了战机过失速的作战效能评估,得出了最大迎角与捕获时间的定量关系.仿真结果表明,所开发的系统具有预期的仿真开发的快速适应性.     

自主多无人机的分散化协同控制

协同前提是无人机(UAV)平台间的通信和信息共享,无人机平台之间信息和计算是高度分布的,无人机平台的运动以及通信拓扑的变化,使得集中式协调控制结构很难实现。以最小通信量为基础的分散协同控制具有可扩展性、异构性和动态可重构性等特点,可靠性和鲁棒性较好。针对多无人机平台分散化协同的特点和要求,建立了集中和分散相结合的多无人机平台协同控制系统结构,集中式任务管理系统主要完成目标分配、通信管理和编队管理功能,分散式协同部分主要实现局部任务规划、协调策略及协调控制等功能。分别以多机协同目标跟踪、多机和多编队一致性协调、多机协同编队控制与重构等多无人机平台分散化协同控制技术为应用对象,探讨了分散化协调机制、策略、控制及其与信息之间关系。给出了部分算法的仿真结果。     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.     

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl4 and SbCl3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using: (1) an ion-exchange hydrolysis to remove chlorine ions, and (2) isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.     

Effects of Mo on the Microstructure and Hydrogen Sorption Properties of Ti-Mo Getters

The effects of Mo on the microstructure evolution, porosity and hydrogen sorption properties of Ti-Mo getters are investigated in this work. The results show that the addition of Mo prolongs the densification process of Ti-Mo getters and results in a significant amount of sintered pores. With the Mo content increasing, the porosity of getters firstly increases reaching the maximum value as it at- tains about 7.5wt.%, and then drops. At the room temperature, the hydrogen sorption property of getters increases progressively with the Mo content increasing, but the tendency is not very clear before its content lies below 2.5wt.%. When the Mo content achieves about 7.5wt.%, the hydrogen sorption property proves to be the best. The discussion is made about the above mentioned phenomena inclusive of hydrogen sorption properties of getters under different activation conditions (from 500-750 ℃).     

超声速燃烧数值模拟中的湍流与化学反应相互作用模型

高精度数值模拟有助于理解超声速湍流燃烧中湍流与化学反应的相互作用,可为发动机燃烧室等工程应用设计提供可靠的预测模型。除直接数值模拟外,目前在湍流燃烧应用中使用的大涡模拟和雷诺平均Navier-Stokes模拟均需要借助模型模化发生在湍流小尺度上的流动与化学反应过程对湍流大尺度运动的影响。现有的湍流与化学反应相互作用模型大致可分为:火焰面类模型和概率密度函数类模型,2类模型在不同的应用中各自具有优势和局限性。此外,现有模型大都基于低马赫数燃烧,而超声速燃烧中通常会伴随快速混合、局部熄火和再着火以及激波等复杂过程,这为发展其中的湍流与化学反应相互作用模型提出了更多的挑战。     

适于低轨卫星IP网络的单核共享树组播算法(英文)

为了解决低轨卫星IP网络中现有典型源组播算法的信道资源浪费问题,本文提出了一套单核共享树组播算法,即核心群合并共享树(CCST)和加权核心群合并共享树(w-CCST)算法。CCST 算法包括动态近似中心(DAC)选核方法和核心群合并组播路径构建方法。DAC方法专为周期、规律运动的低轨卫星网络提出,不需要复杂的星上计算。在核心群合并方法中,以核节点作为初始核心群,通过核心群和剩余组成员的最短路径方法逐步扩展直至整棵组播树构建完成,从而使得组播树的树代价最小,大大提高了网络的带宽利用率和组播传输效率。w-CCST 算法中所提出的加权因子可以调整树代价和端到端传播时延之间的折衷程度,因此,可以通过调整加权因子来适度增大树代价、降低端到端传播时延以支持某些端到端时延要求苛刻的实时组播业务。最后,与低轨卫星 IP 网络中典型算法进行了性能比较,仿真结果说明,CCST 算法的平均树代价比其它算法显著降低,w-CCST 算法的平均端到端传播时延小于 CCST 算法。     

Jet Vectoring Control Using a Novel Synthetic Jet Actuator

A primary air jet vectoring control system with a novel synthetic jet actuator (SJA) is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either “push” or “pull”, one novel synthetic jet actuator can fulfill both “push” and “pull” functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.     

Nonlinear Adaptive Slewing Motion Control of Spacecraft Truss Driven by Synchronous V-gimbaled CMG Precession

The slewing motion control of a truss arm driven by a V-gimbaled control-moment-gyro (CMG) is a nonlinear control problem. The V-gimbaled CMG consists of a pair of gyros that must precess synchronously. The moment of inertia of the system, the angular momentum of the gyros and the external disturbances are not exactly known. With the help of feedback linearization and recursive Lyapunov design method, an adaptive nonlinear controller is designed to deal with the unknown items. Performance of the proposed controller is verified by simulation.     

An SOR Implicit Time-accurate Scheme in Calculating Unsteady Flows

A new time-accurate marching scheme for unsteady flow calculations is proposed in the present work. This method is the combination of classical Successive Over-Relaxation (SOR) iteration method and Jacobian matrix diagonally dominant splitting method of LUSGS. One advantage of this algorithm is the second-order accuracy because of no factorization error. Another advantage is the low computational cost because the Jacobian matrices and fluxes are only calculated once in each physical time step. And, the SOR algorithm has better convergence property than Gauss-Seidel. To investigate its accuracy and convergency, several unsteady flow computa- tional tests are carried out by using the proposed SOR algorithm. Roe’s FDS scheme is used to discritize the inviscid flux terms. Un- steady computational results of SOR are compared with the experiment results and those of Gauss-Seidel. Results reveal that the numerical results agree well with the experimental data and the second-order accuracy can be obtained as the Gauss-Seidel for unsteady flow computations. The impact of SOR factor is investigated for unsteady computations by using different SOR factors in this algorithm to simulate each computational test. Different numbers of inner iterations are needed to converge to the same criterion for different SOR factors and optimal choice of SOR factor can improve the computational efficiency greatly.