吸收变异的粒子群算法及应用

提出了一种改进的粒子群算法,称为ConvergencemutationPSO(CM_PSO)。该算法根据粒子群中各粒子的适应值动态地调整粒子数量,把部分适应度差的粒子适当汇聚到适应度好的区域,在不损失全局搜索能力的同时,增强局部搜索能力。在将该算法应用于雷达组网误差配准问题中,提出了一种基于CM_PSO的误差配准技术。仿真表明,该算法能有效配准,与对比方法相比较,具有更好的收敛精度和更快的进化速度。     

复杂航迹和起伏地形条件下机载聚束SAR 空变运动补偿

 运动补偿是雷达平台机动飞行条件下合成孔径雷达(SAR)实现精确聚焦成像的前提,而如何精确实现运动误差的空变补偿(误差补偿随目标距离、方位和高度位置的变化而变化)目前还存在很大的挑战。本文提出了一种新的三阶运动补偿方法,能够有效解决复杂雷达航迹和地形起伏条件下运动误差的空变补偿问题。该方法首先以场景中心为参考进行空不变运动补偿,然后以多个子场景中心为参考进行空变运动补偿,最后再利用极坐标格式算法(PFA)统一补偿每个像素的空变误差。仿真数据处理结果验证了本文方法的有效性。     

Strapdown inertial measurement units for motion compensation forsynthetic aperture radars

It is shown that synthetic-aperture radar (SAR) motion can be compensated by using an antenna-mounted strapdown inertial measurement unit (IMU) as the motion sensing system, but sensor and system errors affect SAR image quality. A strapdown IMU consists of three accelerator channels and three gyro channels. Strapdown IMU errors include gyro-scale and accelerometer-scale factor and bias errors, velocity error, platform tilt, and errors induced by limited inertial sensor bandwidth. The effects of these errors on the SAR image quality are presented in terms of the SAR impulse response. IMU errors that cause low-frequency phase errors (less than one cycle per array time) are categorized in terms of quadratic and cubic phase errors. IMU errors that cause high-frequency phase errors (greater than one cycle per array time) are categorized in terms of the integrated sidelobe ratio and peak sidelobe ratio. A motion compensation system conceptualization is described wherein a strapdown IMU is attached to an antenna and transfer-aligns to the aircraft's master navigator     

Doppler Radar Error Equations for Damped Inertial Navigation System Analysis

The use of Doppler radar measurements to provide velocity damping for an aircraft inertial navigation system is considered. Three different Doppler antenna configurations are examined: two-axis stabilized, azimuth stabilized, and data stabilized antennas. A general reference velocity error equation is presented and appropriately evaluated for each of the Doppler configurations. Specific elements of the error equations are examined and physically interpreted for both local-level and space-stable inertial systems. Detailed examination of the interaction of Doppler radar and inertial navigation velocity error mechanisms is provided.     

Beamspace ML bearing estimation incorporating low-angle geometry

A problem in low-angle radar tracking, namely, bearing estimation in the presence of a strong specular multipath component that arrives within the beamwidth of the direct path signal, is studied. Three-dimensional beamspace domain maximum likelihood (3D-BDML) is a computationally simple ML bearing estimation algorithm applicable in this scenario which operates in a 3-D beamspace. A variation of 3D-BDML incorporating the multipath geometry as a priori information is presented. In symmetric 3D-BDML the pointing angle of the center beam is equal to the bisector angle between the direct path ray and the image ray, which may be estimated a priori given only the radar height and the target range. The effect of the inclusion of a priori information on the performance of 3D-BDML is analyzed in terms of the dependence on the relative phase difference between the direct and specular path signals, the sensitivity to error in the bisector angle estimate, and the results of operation when no specular multipath component is present in the data. In addition, computationally simple schemes for coherently incorporating multifrequency data into 3D-BDML are investigated     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

北斗/惯性深耦合接收机速度误差特性研究

北斗/惯性深耦合接收机利用了惯性辅助和微惯性器件误差实时补偿技术,具有更好的高动态适应性与抗干扰能力。深耦合接收机中,惯性测量模块与接收机模块的信息相互利用,形成了2个闭合的误差传递通道:位置通道和速度通道。针对速度通道分析了误差传递特性。首先,考虑了三阶锁相环所实现的载波跟踪环路,在对组合滤波器进行简化的基础上,建立了速度通道的传递函数模型;然后,推导了惯性辅助误差到接收机速度误差的传递关系,分析了其误差特性;进一步将惯性辅助误差分为由惯性器件误差和由辅助信息更新率低引起的误差,分别分析了它们对接收机速度误差的贡献。分析结果表明:1)惯性辅助误差到接收机速度误差的传递模型表现为高通特性;2)由惯性器件误差所引起的速度误差,因受载波跟踪环路滤波器的作用而大大减小;3)比较而言,由辅助信息更新率低所引起的速度误差更为显著。     

Target motion compensation in synthetic aperture radar

In a synthetic aperture radar (SAR) targets on the ground that are moving become smeared as a result of velocity components parallel to the motion of the radar and are moved to radically different angular positions if they have velocity components perpendicular to the motion of the radar. Methods for restoring moving targets to their correct size and position are described. The samples collected for SAR processing are frequency-modulated RF pulses. Mathematically this leads to spectra that are described by Fresnel integrals. For stationary targets, the spectrum is symmetrical around the origin. If there is a moving target in a range cell, its Doppler spectrum will be displaced from the origin and may undergo other changes as a result of its nonzero velocity. Proper compensation to locate the target at the correct position requires that the spectrum be translated to a position dependent on the along-track velocity rather than to the origin. From the central frequency, the along-range velocity component can be estimated and the length of the translation can then be found. After translation, the spectrum is converted back to the time domain and the customary SAR processing is performed     

运动补偿用惯性器件误差对SAR成像分辨率的影响研究

 为提高合成孔径雷达（SAR）系统的性价比,必须根据SAR成像分辨率的要求和整体系统参数,设计相应精度的运动补偿用捷联惯导系统。在确定SAR运动补偿系统方案和安装方式的基础上,分析不同方向的加速度计和陀螺仪误差对天线相位中心位置测量误差的影响,并利用位置测量误差与SAR成像分辨率之间的关系,进一步明确了不同方向的加速度计和陀螺仪对SAR成像分辨率的影响。研究表明：基于SAR的工作原理和安装方式,x方向加速度计和y方向陀螺仪对SAR成像分辨率的影响明显比其他惯性器件严重;相同误差水平的惯性器件对SAR成像分辨率的影响随着合成孔径时间和工作波长的不同而不同,时间越长,波长越短,影响则越严重。SAR成像仿真证明了结论的正确性。研究结果对于研制高性价比SAR成像运动补偿系统有一定的理论指导意义。     

Time windowing for highly focused ISAR image reconstruction

In several applications long recorded live inverse synthetic aperture radar (ISAR) data are used to obtain one or more ISAR images. In order to reconstruct a well-focused ISAR image, a suitable selection of the echoes to be coherently processed must be provided. Such a selection can be made by defining a time window. We propose a technique for the automatic selection of the position and length of the time window that provides the ISAR image with the highest focus. The technique, namely the maximum contrast based automatic time window selection (MC-ATWS), is based on the definition of image contrast (IC). Due to the fact that the IC is a measure of the image focus, the time window is selected by maximizing the IC. The technique effectiveness is tested by using simulated and real data.     

Sum-difference Reduced-dimensional Processing in SAR Image Domain and Statistical Analysis for Ground Moving Target Indication

In this article, a new reduced-dimensional adaptive processing algorithm based on joint pixels sum-difference data for clutter rejection is proposed. The sum-difference data are obtained by orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multi-satellite radar system. In the sense of statistical expectation, the sum-differ- ence data contain the common and different information of the SAR images. Therefore, the objective of clutter cancellation can be achieved by adaptive processing. Moreover, based on the residual image after clutter rejection, statistical analysis of constant false-alarm rate (CFAR) detection of moving targets is also presented. Simulation results demonstrate the effectiveness and robustness of the proposed algorithm even with heterogeneous clutter and image co-registration error.     

一种基于盲同态解卷积的SAR成像自聚焦算法

针对大气扰动及飞行平台不稳引起机载合成孔径雷达(SAR)图像散焦的问题,提出了一种新的自聚焦算法来估算运动误差。该算法是基于运动误差函数及场景散射函数平滑特性的差异来进行估计的,利用复对数变换将图像的幅度与相位信息分离,进而分别对相位及幅度信息进行处理。运动误差通常为慢变函数,而场景的散射信息具有某种随机特性。因此,经过复对数变换后,运动误差及散射信息可以通过滤波器进行分离,将相位中的随机噪声去除,从而保留了慢变的运动误差函数。为了去除噪声信息,需要建立一个平滑滤波器,利用Daubechies小波的尺度函数构造Riesz基向量,从而建立了正交子空间,通过所建立信号子空间及噪声子空间组建平滑滤波器,最终可以获得准确的运动误差。在实验部分,分别利用仿真数据及实测数据对本文方法进行验证,最终结果分析表明该方法具有很高的估计精度及执行效率。     

Accuracy of using point targets for SAR calibration

The peak and integral methods for radiometric calibration of a synthetic aperture radar (SAR) using reference point targets are analyzed. Both calibration methods are shown to be unbiased, but the peak method requires knowledge of the equivalent rectangle system resolution which is sensitive to system focus. Exact expressions for the RMS errors of both methods are derived. It is shown that the RMS error resulting from the peak method is always smaller than or equal to that from the integral method for a well-focused system. However, for robust radiometric calibration of SAR, or when nonlinear phase errors are present, the integral method is recommended, because it does not require detailed knowledge of the impulse response and the resulting RMS error is not dependent on system focus     

双基角时变下的空间目标BISAR自聚焦算法

以空间目标为研究对象,针对双基地逆合成孔径雷达(BISAR)成像中双基角变化及同步误差导致的二维ISAR像散焦问题,提出了基于粒子群优化(PSO)的非参数自聚焦算法。算法首先将回波中平动和转动及同步误差等因素导致的相位变化项统一建模,其次将二维图像对比度最大作为优化目标,利用PSO算法对所有高次项相位进行整体优化估计,然后对高阶相位项进行补偿,最后基于补偿后剩余的一阶线性相位项进行方位压缩得到目标的二维ISAR像。算法可解决参数相位误差估计法中因模型误差导致的聚焦精度下降问题,同时也降低了BISAR自聚焦算法的复杂度。通过与参数法自聚焦算法的性能进行对比仿真实验,验证了算法的有效性。     

ADS-B用于高精度雷达标定的方法

为了更好地解决高精度雷达标定的问题,提出了基于广播式自动相关监视系统(ADS-B)固定误差及目标回波中心动态修正的雷达标定新方法。首先分析了ADS-B位置数据误差的来源、类型及在雷达坐标系下的特征,同时对民航目标回波中心的变化作了分析建模,在此基础上进一步通过对雷达数据与ADS-B数据之差作动态联合修正,最终估算出雷达系统误差,提高了雷达系统误差标定的精度和稳定性。并利用多批次的实测数据对该标定新方法与其他方法进行了对比验证,结果表明,该方法有效提高了标定的精度和稳定性,并已成功应用于雷达标定设备中。     

Propagation velocity uncertainty on GPR SAR processing

To detect buried landmines, Planning Systems Incorporated (PSI) has developed a ground-penetrating synthetic aperture radar (GPSAR) system. Since the electromagnetic wave propagation velocity in the soil depends on many factors, velocity uncertainty is inevitable. However, we have observed that, unlike conventional airborne/spaceborne synthetic aperture radar (SAR) systems, the PSI GPSAR system is very robust against the velocity uncertainty under mild conditions. Theoretical analysis is provided to explain this observation. Although our discussion is based on the PSI GPSAR system, it applies to other GPR-based (ground-penetrating radar) landmine detection systems as well.     

Velocity Estimation from Position Outputs of a Three-Dimensional Radar

Kalman filtering equations to obtain estimates of velocity from radar position information are defined. In a track-while-scan operation, a three-dimensional radar sensor measures range, bearing, and elevation (r, ?, ?) of an airborne target at uniform sampling intervals of time T. The noisy position measurements are converted to x, y, z coordinates and put through a Kalman filter to obtain x, y, z velocity components. The filtering equations together with steady-state error estimates are given.     

基于数值计算的机载SAR空变运动补偿算法

针对机载合成孔径雷达(SAR)高分辨率宽测绘带(HRWS)成像问题,在分析结合两步运动误差补偿的距离徙动算法基础上,提出一种基于数值计算的空变运动误差补偿算法。通过对粗聚焦图像进行分块,在子块的两维波数域进行空变运动补偿,补偿的相位包括方位相位误差、距离相位误差以及方位和距离的耦合相位,因此该算法在复杂航迹、高分辨和宽测绘带情况下仍具有较好的鲁棒性。最后对SAR仿真数据和实测数据进行处理,并与结合两步运动误差补偿的距离徙动算法进行比较,处理结果表明该算法能够更好地补偿空变运动误差。     

ISAR非平稳目标成像时间和转速联合估计方法

针对逆合成孔径雷达(ISAR)非平稳目标成像,提出基于两特显点相位联合估计成像时间和转速的方法,并得到了转速与相位斜率差(PSD)的解析表达式.首先,基于两个特显点距离单元估计目标转动相位,根据不同时间段转动相位线性度(PLD)选择成像时间.其次,在适合成像的时间段,将成像时间等分成两段,分别提取两段时间内转动相位的斜...     

一种稳健的利用分布式小卫星获取宽域、高分辨SAR图像的方法

 传统星载合成孔径雷达(SAR)受最小天线面积条件的限制,其横向分辨率与测绘带宽度相矛盾,采用编队飞行的分布式小卫星SAR体制,可解决这一矛盾,即能够同时获得大测绘带、高分辨率的地面场景的SAR图像。主要研究如何在误差环境下抑制由小天线引入的多普勒模糊的信号处理方法。该方法利用子空间投影技术对导向矢量进行精确估计,在小卫星存在基线及其他误差时仍然能够稳健地恢复高分辨的二维SAR图像。