Robotic Instrument for Grinding Rocks Into Thin Sections (GRITS)

We have developed a rock grinding and polishing mechanism for in situ planetary exploration based on abrasive disks, called Grinding Rocks Into Thin Sections (GRITS). Performance characteristics and design considerations of GRITS are presented. GRITS was developed as part of a broader effort to develop an in situ automated rock thin section (ISARTS) instrument. The objective of IS-ARTS was to develop an instrument capable of producing petrographic rock thin sections on a planetary science spacecraft. GRITS may also be useful to other planetary science missions with in situ instruments in which rock surface preparation are necessary.     

Development of a thin section device for space exploration: Overview and system performance estimates

In this paper we present a conceptual design of a spaceborne instrument for the in situ production of rock thin sections on planetary surfaces. The in situ Automated Rock Thin Section Instrument (IS-ARTS) conceptual design demonstrates that the in situ production of thin sections on a planetary body is a plausible new instrument capability for future planetary exploration. Thin section analysis would reduce much ambiguity in the geological history of a sampled site that is present with instruments currently flown. The technical challenge of producing a thin section device compatible with the spacecraft environment is formidable and has been thought too technically difficult to be practical. Terrestrial thin section preparation requires a skilled petrographist, several preparation instruments that individually exceed typical spacecraft mass and power limits, and consumable materials that are not easily compatible with spaceflight. In two companion papers we present research and development work used to constrain the capabilities of IS-ARTS in the technical space compatible with the spacecraft environment. For the design configuration shown we conclude that a device can be constructed that is capable of 50 sample preparations over a 2 year lifespan with mass, power, and volume constraints compatible with current landed Mars mission configurations. The technical requirements of IS-ARTS (mass, power and number of samples produced) depend strongly on the sample mechanical properties, sample processing rate, the sample size and number of samples to be produced.     

Miniaturized laser-induced plasma spectrometry for planetary in situ analysis – The case for Jupiter’s moon Europa

Jupiter’s icy moon Europa is one of most promising places in our Solar System where possible extraterrestrial life forms could exist either in the past or even presently. The Europa Lander mission, an exciting part of the international Europa Jupiter System Mission (EJSM/Laplace), considers in situ planetary exploration of the moon. The distance of Europa from the Earth and the Sun asks for autonomous analytical tools that maximize the scientific return at minimal resources, demanding new experimental concepts. We propose a novel instrument, based on the atomic spectroscopy of laser generated plasmas for the elemental analysis of Europa’s surface materials as far as it is in reach of the lander for example by a robotic arm or a mole, or just onboard the lander. The technique of laser-induced plasma spectrometry provides quantitative elemental analysis of all major and many trace elements. It is a fast technique, i.e. an analysis can be performed in a few seconds, which can be applied to many different types of material such as ice, dust or rocks and it does not require any sample preparation. The sensitivity is in the range of tens of ppm and high lateral resolution, down to 50 μm, is feasible. In addition, it provides the potential of depth profiling, up to 2 mm in rock material and up to a few cm in more transparent icy matrices. Key components of the instrument are presently developed in Germany for planetary in situ missions. This development program is accompanied by an in-depth methodical investigation of this technique under planetary environmental conditions.     

数控加工中等高线刀具轨迹的生成

针对高质量的等高线高速加工要求,设计并实现了数控加工中、根据刀位面及其Zmap模型计算等高线刀具轨迹的原理和算法.该算法充分考虑了刀位面Zmap模型的特点,能确保刀具轨迹始终处于顺铣状态,从而保证了良好的加工工艺性.算法稳定性好,计算速度快,并已在商品化软件CAXA-ME中成功实现.      

An introduction to the lunar and planetary science activities in Korea

Korea is planning a series of lunar space programs in 2020 starting with a lunar orbiter and a lander with a rover. Compared to other countries, Korea has a relatively brief history in space and planetary sciences. With the expected Korean missions on the near-term horizon and the relatively few Korean planetary scientists, Korea Institute of Geoscience and Mineral Resources (KIGAM) has established a new planetary research group focusing on development of prospective lunar instruments, analysis of the publicly available planetary data of the Moon, organizing nationwide planetary workshops, and initiating planetary educational programs with academic institutions. Korea has also initiated its own rocket development program, which could acquire a rocket-launch capability toward the Korean lunar mission. For the prospective Korea’s lunar science program, feasibility studies for some candidate science payloads have been started since 2010 for an orbiter and a lander. The concept design of each candidate instrument has been accomplished in 2012. It is expected that the development of science payloads may start by 2014 as Phase A. Not only developing hardware required for the lunar mission but also educational activities for young students are high priorities for Korea. The new plan of the Korean lunar mission can be successfully accomplished with international cooperative outreach programs in conjunction with internationally accessible planetary data system (PDS). This paper introduces the KIGAM’s international cooperative planetary research and educational programs and also summarizes other nationwide new developments for Korean lunar research projects at Kyung Hee University and Hanyang University.     

The new ESA meteoroid model

The orbital distributions of meteoroids in interplanetary space are revised in the ESA meteoroid model to account for recently obtained observational data and to comply with the constraints due to the orbital evolution under planetary gravity and Poynting–Robertson effects. Infrared observations of the zodiacal cloud by the COBE DIRBE instrument, in situ flux measurements by the dust detectors on board Galileo and Ulysses spacecraft, and the crater size distributions on lunar rock samples retrieved by the Apollo missions are synthesized into a single model. Within the model, the orbital distributions are expanded into a sum of contributions due to a number of known sources, including the asteroid belt with the emphasis on the prominent families Themis, Koronis, Eos and Veritas, as well as comets on Jupiter-encountering orbits. An attempt to incorporate the meteor orbit database acquired by the AMOR radar is also discussed.     

Laboratory investigations of the survivability of bacteria in hypervelocity impacts.

It is now well established that material naturally moves around the Solar System, even from planetary surface to planetary surface. Accordingly, the idea that life is distributed throughout space and did not necessarily originate on the Earth but migrated here from elsewhere (Panspermia) is increasingly deemed worthy of consideration. If life arrived at the Earth from space, its relative speed will typically be of order many km s-1, and the resulting collision with the Earth and its atmosphere will be in the hypervelocity regime. A mechanism for the bacteria to survive such an impact is required. Therefore a programme of hypervelocity impacts in the laboratory at (4.5 +/- 0.6) km s-1 was carried out using bacteria (Rhodococcus) laden projectiles. After impacts on a variety of target materials (rock, glass and metal) attempts were made to culture Rhodococcus from the surface of the resulting craters and also from the target material ejected during crater formation. Control shots with clean projectiles yielded no evidence for Rhodococcus growth from any crater surface or ejecta. When projectiles doped with Rhodococcus were used no impact crater surface yielded colonies of Rhodococcus. However, for four shots of bacteria into rock (two on chalk and two on granite) the ejecta was afterwards found to give colonies of Rhodococcus. This was not true for shots onto glass. In addition, shots into aerogel (density 96 kg m-3) were also carried out (two with clean projectiles and two with projectiles with Rhodococcus). This crudely simulated aero-capture in a planetary atmosphere. No evidence for Rhodococcus growth was found from the projectiles captured in the aerogel from any of the four shots.     

用反圆环面刀加工变曲率过渡曲面原理

基于宽行加工理论和广域曲率吻合原则,提出一种利用圆环面内侧作为刀具工作面的反圆环面刀具宽行加工叶片进排气边的新方法.该方法通过优化刀具摆角使具有定母圆半径刀具工作面的包络面充分逼近叶片进排气边曲面,从而使刀具能在给定的精度范围内以最大行宽和最少刀轨行数加工出进排气边.最后,以某型号发动机叶片的进气边为例进行了加工实验.结果表明该方法能够大幅提高进排气边的加工质量,且反圆环面刀的加工行宽比球头刀提高了5倍.     

Mapping lunar surface chemistry: New prospects with the Chandrayaan-2 Large Area Soft X-ray Spectrometer (CLASS)

Surface chemistry of airless bodies in the solar system can be derived from remote X-ray spectral measurements from an orbiting spacecraft. X-rays from planetary surfaces are excited primarily by solar X-rays. Several experiments in the past have used this technique of X-ray fluorescence for deriving abundances of the major rock forming elements. The Chandrayaan-2 orbiter carries an X-ray fluorescence experiment named CLASS that is designed based on results from its predecessor C1XS flown on Chandrayaan-1. We discuss the new aspects of lunar science that can be potentially achieved with CLASS.     

鼓形刀宽行刀位优化纬线分割算法

为便于鼓形刀定位和姿态调整,结合最短距离线对思想,将刀具沿纬度方向进行离散.为使刀具更好地适应工件的曲率分布,实现广域曲率分布吻合,采用单点切触方法,在加工曲面一定范围内寻求最佳切触点,以达到最大切削行宽;分别采用等参数和等波高2种刀位优化算法,编制了程序;通过实例验证了新算法在避免干涉并获得最大行宽、以及实现等参数和等波高刀轨排列方面的有效性.该技术对于提高航空复杂曲面结构件的加工效率和加工质量具有重要意义和广泛的应用前景.      

A drilling tool design and in situ identification of planetary regolith mechanical parameters

The physical and mechanical properties as well as the heat flux of regolith are critical evidence in the study of planetary origin and evolution. Moreover, the mechanical properties of planetary regolith have great value for guiding future human planetary activities. For planetary subsurface exploration, an inchworm boring robot (IBR) has been proposed to penetrate the regolith, and the mechanical properties of the regolith are expected to be simultaneously investigated during the penetration process using the drilling tool on the IBR. This paper provides a preliminary study of an in situ method for measuring planetary regolith mechanical parameters using a drilling tool on a test bed. A conical-screw drilling tool was designed, and its drilling load characteristics were experimentally analyzed. Based on the drilling tool-regolith interaction model, two identification methods for determining the planetary regolith bearing and shearing parameters are proposed. The bearing and shearing parameters of lunar regolith simulant were successfully determined according to the pressure-sinkage tests and shear tests conducted on the test bed. The effects of the operating parameters on the identification results were also analyzed. The results indicate a feasible scheme for future planetary subsurface exploration.     

U.S. planetary protection program: Implementation highlights

The implementation of planetary protection in the United States space program has reflected the trend in policy from an absolute to a probabilistic prohibition of the contamination of the celestial bodies of the solar system. The early emphasis on spacecraft sterilization (e.g. Ranger) was replaced by the imposition of contamination control procedures on later missions such as Pioneer, Viking, and Voyager. Similarly, analytical and laboratory techniques were developed to demonstrate compliance with probabilistic requirements. Microbial burden reduction methods that are not hazardous for spacecraft reliability supplanted the abstract concept of sterilization. The United States implementation of planetary protection has been completely successful. In an exploration program that has included Mercury, Venus, Mars, the Jovian system, and the Saturnian system, there have been no accidental impacts or detection of false positives (terrestrial microbes). Further, the contamination control and microbial burden procedures have proved beneficial to spacecraft systems and on-board science instruments. We review in this paper the implementation of planetary protection procedures by the Pioneer (10 and 11), Viking and Voyager projects.     

Wireless sensor networks for planetary exploration: Experimental assessment of communication and deployment

Planetary surface exploration is an appealing application of wireless sensor networks that has been investigated in recent years by the space community, including the European Space Agency. The idea is to deploy a number of self-organizing sensor nodes forming a wireless networked architecture to provide a distributed instrument for the study and exploration of a planetary body. To explore this concept, ESA has funded the research project RF Wireless for Planetary Exploration (RF-WIPE), carried out by GMV, SUPSI and UPM. The purpose of RF-WIPE was to simulate and prototype a wireless sensor network in order to assess the potential and limitations of the technology for the purposes of planetary exploration.     

Modeling and experimental validation of sawing based lander anchoring and sampling methods for asteroid exploration

This paper presents a novel lander anchoring system based on sawing method for asteroid exploration. The system is composed of three robotic arms, three cutting discs, and a control system. The discs mounted at the end of the arms are able to penetrate into the rock surface of asteroids. After the discs cut into the rock surface, the self-locking function of the arms provides forces to fix the lander on the surface. Modeling, trajectory planning, simulations, mechanism design, and prototype fabrication of the anchoring system are discussed, respectively. The performances of the system are tested on different kinds of rocks, at different sawing angles, locations, and speeds. Results show that the system can cut 15?mm deep into granite rock in 180?s at sawing angle of 60°, with the average power of 58.41?W, and the “weight on bit” (WOB) of 8.637?N. The 7.8?kg anchoring system is capable of providing omni-directional anchoring forces, at least 225?N normal and 157?N tangent to the surface of the rock. The system has the advantages of low-weight, low energy consumption and balance forces, high anchoring efficiency and reliability, and could enable the lander to move and sample or assist astronauts and robots in walking and sampling on asteroids.     

A neutral gas mass spectrometer to measure the chemical composition of the stratosphere

The Polar Balloon Atmospheric Composition Experiment (P-BACE) is a new generation of neutral gas mass spectrometer based on the time-of-flight principle. P-BACE is the scientific experiment on the Mars Environment Analog Platform (MEAP) flown successfully on a balloon mission in summer 2008. The MEAP mission was flown with a 334,000 m³ helium balloon in the stratosphere on a semicircular trajectory from northern Sweden around the North Pole to Canada using the summer northern hemispheric wind current. The atmospheric conditions at an atmospheric altitude of 35–40 km are remarkably similar to those on the surface of Mars and thus the balloon mission was an ideal testbed for our mass spectrometer P-BACE. Originally this instrument was designed for in situ measurements of the chemical composition of the Martian atmosphere.P-BACE has a unique mass range from 0 to 1000 amu/q with a mass resolution m/Δm (FWHM) > 1000, and the dynamic range is at least six orders of magnitude. During this experiment, the acquisition of one mass spectrum is a sum of 65,535 single spectra, recorded in a time frame of 66 s.The balloon mission lasted 5 days and had successfully demonstrated the functionality of the P-BACE instrument during flight conditions. We had recorded more than 4500 mass spectra. With little modifications, P-BACE can be used on a planetary mission for Mars, but for example also for Venus or Mercury, if placed on a satellite.     

磁通门磁强计在深空探测中的应用

磁场测量是深空探测的重要任务之一,通过磁场可以遥感行星内部、研究行星演化历史、认知太阳系天体空间环境。基于法拉第电磁感应原理的磁通门磁强计,因空间适应性强、技术成熟度高、可靠性高等特点,是深空磁场测量最为常用的载荷。简要描述了磁通门磁强计的基本测量原理,探讨了地面和在轨标定的原理和实施方法,并介绍了磁强计在空间任务中的应用方式。目前,我国已经具备了星载高精度磁通门磁强计的研制能力。在不久的将来,磁通门磁强计有望在深空探测任务中发挥重要作用。     

Scientific results from the pioneer Saturn infrared radiometer

The Pioneer 11 Infrared Radiometer instrument made observations of Saturn and its rings in broadband channels centered at 20 and 45 μm and obtained whole-disk information on Titan. A planetary average effective temperature of 96.5±2.5 K implies a total emission 2.8 times the absorbed sunlight. Correlation with radio science results implies that the molar fraction of H₂ is 90±3% (assuming the rest is He). Temperatures at the 1 bar level are 137 to 140 K; regions appearing cooler may be overlain by a cloud acting as a 124 K blackbody surface. A minimum temperature averaging 87 K is reached near 0.06 bars. Ring boundaries and optical depths are consistent with those at optical wavelengths. Ring temperatures are 64–86 K on the south (illuminated) side, ～54 K on the north (unilluminated) side, and at least 67 K in Saturn's shadow. There is evidence for a south to north drop in ring temperatures. Titan's 45 μm brightness temperature is 75±5 K.     

球头铣刀在虚轴机床上的刃磨

对虚轴刃磨机床的工作原理进行了分析.建立球头铣刀刀刃的曲线方程,利用活动标架法,推导球头铣刀前后刀面的数学模型.根据球头铣刀的数学模型,求解球头铣刀的广义刀位轨迹,利用虚轴机床的反解模型,把广义的刀位轨迹换算成连杆坐标系下连杆的长度,控制连杆长度的变化,完成刃磨加工运动.进而论证了利用虚轴机床进行刀具加工的优势.     

曲面的平坦方向

从数控加工的实际出发提出了曲面微观、宏观平坦方向这一概念产生的必要性,给出了它们的定义及计算方法。作者编制了通用软件,计算了几张曲面的平坦方向,已将这套软件用于生产实际。     

Improving science return using orbit navigation analysis based on non-imaging science data and the GGS visualization tool

Planetary spacecraft orbital position and instrument pointing knowledge can be incomplete and/or inaccurate due to many operational factors. The degree of error has at times resulted in many hours of re-analysis by the science teams. NASA's Geometry and Graphics Software (GGS), an analysis tool being developed at the Laboratory for Atmospheric and Space Physics (LASP) at the University of Colorado at Boulder, provides the scientist with a standardized method to adjust the look direction knowledge based on the best fit to the science instrument data. The GGS tool locates the instrument boresight based on telemetered spacecraft knowledge and then adjusts that pointing knowledge based on the science analysis of the data obtained from the observation. This technique is similar to the C-Smithing technique (Wang, et al. 1988) which adjusts pointing knowledge based on body placement within an imaging instrument frame. The corrected geometry knowledge, in the SPICE kernel format, is then available for distribution to all mission science teams and for archiving. An example based on the Galileo Ultraviolet Spectrometer (UVS) data from the Earth 1 encounter will be presented.