民用飞机失速尾旋(螺旋)事故

尾旋是飞机在失速后发生的一种特殊的旋转运动,此飞行状况常常导致飞机的失控坠毁,所以民用飞机在飞行中不允许出现尾旋。但由于种种原因,民用飞机尾旋事故还是时有发生。收集了以往民用飞机发生尾旋事故的实例,详细呈现了飞机尾旋的大致过程,为避免尾旋事故的发生提供参考依据。     

CCD photometry of low mass X-ray binaries: LMCX-2, 1556-60 and 1957+11

We present preliminary results from V-band CCD photometric observations of several low-mass X-ray binaries with faint optical counterparts obtained at ESO and CFHT from February to September 1984. LMCX-2 exhibits large (0.3–0.5 magnitude) variations consistent with a possible 6.4 hour period. 1556-605 shows 0.2–0.5 magnitude variations suggesting that the orbital period is longer than 7 hours. 1957+115 shows short time scale (1 hour) variations of 0.1 magnitude.Based on observations obtained at the European Southern Observatory, La Silla, Chile and with the Canada-France-Hawaii telescope, Mauna Kea, HI.     

飞机的全局稳定性分析和非线性控制

现代军用飞机常设计为在大迎角下飞行。此时飞机是一个高度非线性系统，其稳定特性不能用线性方法求解。而实现控制，特别是在非线性不稳定性的情况下，更是十分困难的。本文介绍了一种综合的分析飞机非线性稳定性和控制的方法。即用分岐理论来决定飞机的全局稳定性。用四阶龙格－库塔积分来计算飞机运动的平衡面和分岐点，并构造运动状态的扰动传播矩阵，而此矩阵的特征值可用来预测稳定性的时变性。此外，还利用扰动传播矩阵来求得为满足规定的飞机反应特性（通常由频率和阻尼表示）所需的操纵，即各操纵面反馈回路的放大系数值。对典型飞机的算例计算结果表明，非线性控制是成功的。     

一类非线性系统的D型在线学习控制

结合对初始状态的学习,给出了一类输出方程不含控制变量的时变非线性系统的D型在线学习控制算法及其收敛条件。其特点是将学习误差在线反馈,且迭代初始状态只需通过理想信号及系统的部分信息即可确定。最后,将所得结论应用于机器人系统,表明本文方法是有效的。     

Implicit discontinuous Galerkin method on agglomerated high-order grids for 3D simulations

High quality of geometry representation is regarded essential for high-order methods to maintain their high-order accuracy. An agglomerated high-order mesh generating method is inves-tigated in combination with discontinuous Galerkin (DG) method for solving the 3D compressible Euler and Navier-Stokes equations. In this method, a fine linear mesh is first generated by standard commercial mesh generation tools. By taking advantage of an agglomeration method, a quadratic high-order mesh is quickly obtained, which is coarse but provides a high-quality geometry represen-tation, thus very suitable for high-order computations. High-order discretizations are performed on the obtained grids with DG method and the discretized system is treated fully implicitly to obtain steady state solutions. Numerical experiments on several flow problems indicate that the agglomer-ated high-order mesh works well with DG method in dealing with flow problems of curved geome-tries. It is also found that with a fully implicit discretized system and a p-sequencing method, the DG method can achieve convergence state within several time steps which shows significant effi-ciency improvements compared to its explicit counterparts.     

基于扩展卡尔曼滤波的动量轮故障检测方法

 动量轮作为卫星姿态控制系统的关键执行部件,对其故障检测对维持卫星的正常运行具有重要意义。首先对动量轮系统的故障进行分析,在建立动量轮线性离散状态空间模型的基础上,把动量轮的故障检测作为时变参数系统的跟踪来处理,将动量轮的模型参数作为扩展的状态空间中的状态量,使得动量轮物理模型参数与状态空间中的状态量有对应关系,通过在扩展了的状态空间上采用扩展的卡尔曼滤波,完成时变参数的跟踪。然后,将离散空间的状态量变换回连续空间中,利用物理参数与状态量的对应关系,实现对动量轮物理参数的跟踪。此方法物理意义明确,为系统的物理参数提供了定量的估计值,为进一步诊断故障原因提供了良好的基础。数值仿真表明,此方法能够通过同时检测多个故障参量,实现故障的检测并满足卫星实时性要求。     

飞行器控制系统的高精度计算方法

对于连续时间线性二次最优控制问题，在动力学方程和价值泛函的基础上，给出其全状态下的微分方程，进而将精细时程积分法引入上述问题，其优点为，放弃了传统的差分算法，使计算过程既简便又稳定；避免了Ｒｉｃｃａｔｉ代数方程的求解；具有非常高的计算精度。通过对某飞行器控制系统的计算，充分说明了上述特色。     

基于LMI的多目标特征结构配置方法及应用

提出了将线性矩阵不等式（LMI）技术用于多目标特征结构配置的控制器设计方法。由于利用状态反馈或输出反馈进行特征结构配置时存在一些设计裕度,这些裕度可以用来满足附加的性能指标要求。本文利用LMI技术实现了降低系统参数对摄动的灵敏度同时改善系统的鲁棒稳定性的特征结构配置，为特征结构配置方法的实现提供了一条新的途径。设计实例的仿真结果表明了该方法的有效性。     

自适应消噪与轴承故障诊断

本文采用自适应消噪技术来提高轴承振动信号的信噪比,在常用的 LMS (widrow)算法的基础上,讨论收敛快而计算量增加又较少的 VS (Variable Step)算法,分析表明 VS算法较LMS算法更适于自适应消噪在机械故障诊断中的应用。对故障轴承的振动信号进行同态自适应消噪处理和异态自适应消噪处理,都有助于发现轴承的故障。      

基于加权线性响应面法的神经网络可靠性分析方法

在加权线性响应面法的基础上,提出隐式极限状态方程可靠性分析的神经网络方法。加权线性响应面法不仅形式简单、易于实现,而且可以很好的近似极限状态方程的设计点,但它却不能适应非线性极限状态方程的失效概率计算。神经网络对非线性极限状态方程有很强的近似能力,但神经网络的迭代不如加权线性响应面法那么简单易行,因此提出加权线性响应面与神经网络相结合的可靠性分析方法,这种方法既保证对设计点的精确近似,也保证对设计点附近的非线性极限状态方程的很好近似。与加权线性响应面法相比,本方法计算失效概率的计算工作量有所增加,但对非线性极限状态的计算精度却大大提高。算例充分显示所提算法的合理性和可行性。     

Optical identifications of faint X-ray sources: New CCD candidates for 0918-549, 1822-000 and 1905+000

We present preliminary results of multicolor CCD imaging within the error boxes of several unidentified faint galactic X-ray sources. New, faint ultraviolet stars have been found lying within the combined SAS-3/HEAO A-3 error boxes of Reid et al. (1980) for 0918-549, 1822-000 and the X-ray burster 1905+000.Based on observations collected at the European Southern Observatory, La Silla, Chile.Visiting Astronomer, Canada-France-Hawaii Telescope, administered by NRC of Canada, CNRS of France and U. of Hawaii     

基于远程巡航方式的成本指数计算分析

远程巡航方式和经济巡航方式均是常用的飞行方式,经济巡航方式可以降低整个飞行成本,但航空公司目前很难将该方式下节省的时间成本准确计入,因此远程巡航方式成为当前条件下最为经济的巡航方式。研究了在远程巡航方式下成本指数的计算方法,分析了飞机质量、高度和温度对该成本指数的影响,并根据QAR记录数据进行了验证计算,证明其节油效果明显,具有良好的应用价值。     

民机飞行管理系统建模与仿真实现

飞行管理系统的建模与仿真在民机飞行模拟器的研制中具有重要意义。研究了飞行管理计算机系统(FMCS)的建模。FMCS的功能通过飞行管理计算机(FMC)和控制显示组件(CDU)实现。基于Visual C 编译环境开发了CDU操作界面,可进行数据输入与飞机状态监控。建立了FMC的导航数据库和性能数据库,规划了飞机水平飞行轨迹,完成了侧向飞行控制。最后基于飞行手册给出的飞行剖面数据设计了次优垂直轨迹。仿真结果表明,水平轨迹规划算法切实有效。     

机动多目标跟踪问题中关联区域的研究

 本文研究了跟踪多个机动目标时,由滤波算法所获得的新息向量范数的统计性质,关联区域的大小以及接收正确回波的概率。借助拉蒙特卡洛方法,考察了不同的目标状态模型、目标机动加速度及状态噪声方差等因素对所研究的问题的影响。研究表明,文献[1]所提出的机动目标状态模型及相应的自适应算法具有较好的适应目标机动的能力,关联区域的大小及接收正确回波的概率均较为稳定。     

基于CDM的开口复合材料层合板结构损伤问题研究

为研究含开口复合材料层合板结构在面内载荷作用下的损伤破坏问题,基于CDM基本原理,从平面应力状态下的Gibbs自由能出发,建立描述复合材料层合板结构层内断裂破坏的二维渐进损伤关系;基于ABAQUS材料用户子程序,将上述渐进损伤关系与二维Hashin失效准则相结合,开发复合材料损伤本构模型,并对含开口复合材料层合板结构在拉伸载荷作用下的破坏过程进行数值模拟;通过与文献试验数据的对比,证明该模型在平面拉伸载荷状态下可以有效预测含开口层合板结构的损伤起始与扩展过程,对层合板强度的预测误差较小。应用上述模型对三种不同开口类型层合板结构在剪切载荷作用的下损伤、破坏分析,结果表明：对于相同面积的开口,不同的开口类型会导致层合板抗剪强度产生较大的差异;而在铺层相同情况下,椭圆形开口层合板的剪切强度相对较高。     

Solar Neutrinos

The current status of solar neutrino experiments is reviewed. All the experimental measurements show deficits of solar neutrinos. Non monotonic suppression indicates that the problem may naturally be explained by neutrino oscillations, but not by modifying solar models. A new experiment shows very promising results. We hope that a definite answer to the question of whether solar neutrinos are oscillating will be obtained in the very near future. This revised version was published online in June 2006 with corrections to the Cover Date.     

H0323+022: Classification as a BL Lac and EXOSAT coordinated observations

The object H0323+022 (Doxsey et al. 1983) has been shown to be a BL Lac object by virtue of a diversity of observational characteristics at radio, optical, and x-ray wavelengths, in agreement with the conclusion of Margon and Jacoby (1984). Multi-frequency coordinated observations of this highly variable object with EXOSAT in September 1984 found it to be in a faint quiescent state (1/3; Jy at 5 keV and V=16.55). Preliminary results from the latter observations are presented.     

时变微弱扩频信号检测

提出了一种解决微弱高动态扩频信号捕获的新方法,利用分数阶域滤波设计了伪码—时频联合匹配滤波的框架,最后进行了相关计算并给出了应用实例。     

A data-driven health indicator extraction method for aircraft air conditioning system health monitoring

Prognostics and Health Management (PHM) has become a very important tool in modern commercial aircraft. Considering limited built-in sensing devices on the legacy aircraft model, one of the challenges for airborne system health monitoring is to find an appropriate health indicator that is highly related to the actual degradation state of the system. This paper proposed a novel health indicator extraction method based on the available sensor parameters for the health monitoring of Air Conditioning System (ACS) of a legacy commercial aircraft model. Firstly, a specific Airplane Condition Monitoring System (ACMS) report for ACS health monitoring is defined. Then a non-parametric modeling technique is adopted to calculate the health indicator based on the raw ACMS report data. The proposed method is validated on a single-aisle commercial aircraft widely used for short and medium-haul routes, using more than 6000 ACMS reports collected from a fleet of aircraft during one year. The case study result shows that the proposed health indicator can effectively characterize the degradation state of the ACS, which can provide valuable information for proactive maintenance plan in advance.