共查询到20条相似文献,搜索用时 15 毫秒
1.
介绍了小型无人机系统的总体结构,分析了无人机的结构设计和算法,阐述了弹射起飞系统和伞降着陆系统的设计原理,采用嵌入式系统和GPS设计无人机的飞行姿态控制、导航控制、任务控制系统和数据链,实现了空中机器人的自主飞行。 相似文献
2.
建立弹射系统的动态模型,为弹射起飞提供可信度高的分析设计、仿真验证平台。文章以弹力弹射系统为研究对象,建立无人机弹射起飞过程动力学、运动学模型,基于Matlab/Simulink模块,对弹性元件弹力系数、导轨长度、离架速度等参数进行了系统分析。在仿真过程中,通过改变系统的不同参数,得到了这些参数对系统弹射性能的影响规律。合理的匹配这些参数,可使用此系统弹射多种型号的无人机,提高了效率,节省了试验资源和经费。同时为无人机弹射系统优化和设计研发提供了理论依据。 相似文献
3.
有人机/无人机协同任务控制系统 总被引:4,自引:0,他引:4
针对有人机/无人机协同任务控制系统的设计和实现问题展开研究。结合有人机/无人机协同控制过程的特点,提出了基于自然语言接口方式的有人机/无人机协同任务控制系统结构。在此基础上,分析了系统模块的关键内容,设计了面向有人机与无人机交互过程的任务指令格式,提出了基于优先级的任务模式调度策略,针对无人机的典型任务模式,讨论了航路规划的计算方法选择,最后构建了有人机/无人机协同任务仿真环境。仿真试验结果验证了整体方法的可行性。 相似文献
4.
5.
6.
探讨和分析了无人机采用双发固体火箭助推发射方案时存在的助推器同步性问题。并以某型无人机和火箭助推器为例,进行了火箭助推器的同步性仿真计算以及同步性对无人机发射段飞行稳定性的影响计算,分析确定了影响双发固体火箭同步性的显著因素,并就改善双发火箭同步性提出了相应的技术措施。计算结果表明,火箭助推器同步性对无人机发射段飞行轨迹及稳定性的影响在工程应用上是可行的。 相似文献
7.
无人机综合飞行/推力矢量控制 总被引:2,自引:0,他引:2
以某无人机为背景,主要研究大机动时带推力矢量的综合飞行/推进控制系统的设计方法。应用非线性动态逆方法,根据无人机本身具有明显不同时间尺度差异的动力学特性,结合奇异摄动理论将控制变量按照响应快慢分为4个回路进行了控制器的设计与仿真;设计推力矢量控制和气动控制相结合的控制器,实现飞行和推力矢量的控制综合;将无人机的任务转化为对飞行控制的限制条件,对所设计的控制系统进行了数字仿真,结果表明所设计的控制器能够满足飞机做大机动时的控制要求。 相似文献
8.
根据无人机的零长发射原理,通过多个型号的发射仿真计算和发射试验分析,详细探讨了影响无人机安全发射的固有参数和外部参数,总结出影响螺桨式无人机安全发射的主要因素有:单发螺旋桨的反扭矩,火箭推力线相对重心的位置,火箭安装角,机体发射角,舵机死区及发射环境等。最后,以发射安全高度、速度、过载为约束条件,给出了火箭总冲、推力线位置、火箭安装角、机体发射角、发射风向和风速等参数的确定方法,该方法对保证无人机 相似文献
9.
10.
11.
12.
13.
14.
《中国航空学报》2021,34(2):504-515
This paper investigates a formation control problem of fixed-wing Unmanned Aerial Vehicle (UAV) swarms. A group-based hierarchical architecture is established among the UAVs, which decomposes all the UAVs into several distinct and non-overlapping groups. In each group, the UAVs form hierarchies with one UAV selected as the group leader. All group leaders execute coordinated path following to cooperatively handle the mission process among different groups, and the remaining followers track their direct leaders to achieve the inner-group coordination. More specifically, for a group leader, a virtual target moving along its desired path is assigned for the UAV, and an updating law is proposed to coordinate all the group leaders’ virtual targets; for a follower UAV, the distributed leader-following formation control law is proposed to make the follower’s heading angle coincide with its direct leader, while keeping the desired relative position with respect to its direct leader. The proposed control law guarantees the globally asymptotic stability of the whole closed-loop swarm system under the control input constraints of fixed-wing UAVs. Theoretical proofs and numerical simulations are provided, which corroborate the effectiveness of the proposed method. 相似文献
15.
New energy sources such as solar energy and hydrogen energy have been applied to the Unmanned Aerial Vehicle(UAV), which could be formed as the hybrid power sources due to the requirement of miniaturization, lightweight, and environmental protection issue for UAV. Hybrid electrical propulsion technology has been used in UAV and it further enforces this trend for the evolution to the Hybrid-Powered System(HPS). In order to realize long endurance flight mission and improve the energy efficiency of UAV, many researching works are focused on the Energy Management Strategy(EMS) of the HPS with digital simulation, ground demonstration platforms and a few flight tests for the UAV in recent years. energy management strategy, in which off-line or on-line control algorithms acted as the core part, could optimize dynamic electrical power distribution further and directly affect the efficiency and fuel economy of hybrid-powered system onboard.In order to give the guideline for this emerging technology for UAV, this paper presents a review of the topic highlighting energy optimal management strategies of UAV. The characteristics of typical new energy sources applied in UAV are summarized firstly, and then the classification and analysis of the architecture for hybrid power systems in UAV are presented. In the context of new energy sources and configuration of energy system, a comprehensive comparison and analysis for the state of art of EMS are presented, and the various levels of complexity and accuracy of EMS are considered in terms of real time, computational burden and optimization performance based on the optimal control and operational modes of UAV. Finally, the tendency and challenges of energy management strategy applied to the UAV have been forecasted. 相似文献
16.
17.
Time-triggered (TT) embedded software pattern is well accepted in aerospace industry for its high reliability. Fi-nite-state-machine (FSM) design method is widely used for its high efficiency and predictable behavior. In this paper, the time-triggered and state-machine combination software architecture is implemented for a 25 kg thrust micro turbine engine (MTE) used for unmanned aerial vehicle (UAV) system; also model-based-design development workflow for airworthiness software directive DO-178B is utilized. Experimental results show that time-triggered state-machine software architecture and development method could shorten the system development time, reduce the system test cost and make the turbine engine easily comply with the airworthiness rules. 相似文献
18.
19.
Unmanned Aerial Vehicle(UAV) has emerged as a promising novel application for the Sixth-Generation(6G) wireless communication by leveraging more favorable Line-of-Sight(Lo S)propagation. However, the jamming resistance by exploiting UAV’s mobility is a new challenge in the UAV-ground communication. This paper investigates the trajectory planning problem in an UAV communication system, where the UAV is operated by a Ground Control Unit(GCU)to perform certain tasks in the presence of multiple jamm... 相似文献
20.
The main task of this work is to design a control system for a small tail-sitter Unmanned Aerial Vehicle(UAV) during the transition process. Although reasonable control performance can be obtained through a well-tuned single PID or cascade PID control architecture under nominal conditions, large or fast time-varying disturbances and a wide range of changes in the equilibrium point bring nonlinear characteristics to the transition control during the transition process, which leads to control prec... 相似文献