考虑杆臂效应与挠曲变形的全自动着舰技术

联合精确进近和着陆系统（JPALS）舰载组件旨在为最终进近阶段的舰载机提供自动着舰能力。针对由于舰船杆臂效应与挠曲变形的存在导致舰载机着舰定位精度下降的问题,开发了一种基于卫星引导的全自动着舰非线性化参数误差模型,结合舰船甲板运动及舰载机纵向飞行控制模型,评估舰船结构挠曲和姿态不确定性对着舰落点精度的影响。结果表明,杆臂效应与挠曲变形对着舰落点精度有显著影响,利用建立的误差模型以及飞行控制模型,能够将着舰落点精度有效控制在着舰标准之内。     

非线性反馈线性化方法在飞控系统中的应用

应用非线性反馈精确线性化方法进行了飞机自动着陆系统设计。首先,用非线性微分方程组表示的飞机纵向控制系统,在经过输入输出反馈线性化以后,可等效为线性系数;然后,用线性的ＰＩＤ控制方法对变换后的线性系统进行了设计;最后,考虑风的干扰,对所设计的飞机自动着陆控制系统进行了数字仿真。仿真结果表明,用反馈线性化方法设计的飞控系统具有良好的性能。     

一种适用于曲面结构的机器人制孔误差在线补偿技术

针对工业机器人应用于飞机零部件自动钻孔时各项误差累积造成制孔精度差的问题，提出一种利用单应关系计算机器人驱动坐标三维偏差，以在线补偿机器人制孔精度的方法。首先利用外部测量设备建立机器人制孔系统中各坐标系关系；在标定阶段，通过以一定倾斜角度固联于机器人末端的相机拍摄一幅安装于制孔工作平面上与刀轴正对的平面标定板图像，并据此完成基于单应变换的手-眼关系标定；在实际制孔过程中，机器人在测距传感器及相机的辅助下，从基准孔理论坐标对应的姿态，不断调整至基准孔正上方理想位置，通过手-眼关系计算基准孔实际位置对应的机器人驱动坐标，然后根据一组基准孔的机器人三维驱动误差，计算三维驱动误差变换矩阵，据此获得这组基准孔邻域范围内各待钻孔的机器人驱动坐标补偿量，从而实现待钻孔定位误差补偿。以飞机结构实验件为对象进行了模拟制孔验证，实验结果表明，补偿前待钻孔三维综合定位误差和法向误差测量值范围分别为2.28~2.85 mm和2.09°~3.93°，平均为2.55 mm和3.30°，补偿后制孔最大误差分别不超过0.30 mm和0.21°，满足自动制孔位置精度要求。     

基于稳定逆的飞机纵向自动着陆控制律设计

针对着陆过程中飞机对象的非最小相位特性,设计了基于稳定逆的飞机纵向自动着陆控制律.通过求解系统内部动态的有界解,设计了系统对于期望轨迹的稳定逆;基于相对阶的概念设计了光滑、连续的进场着陆期望轨迹.由稳定逆产生期望控制输人和状态轨迹,反馈控制器克服飞机参数不确定性及外界干扰.仿真结果表明,所设计的自动着陆控制律具有精确跟...     

起落架落震试验飞机机轮三向冲击位移的动态测量

为了研究飞机起落架受冲击载荷时的功量吸收状况，须在起落架落震试验中，对飞机着陆瞬间起落架机轮在空间三个方向上冲击位移的动态变化量进行测量。为此，本文设计了四自由度空间定位装置，并使其与计算机连接，实现了落震试验过程中，起落架在高速冲击状态下机轮三向位移的有效测量与记录。     

基于复合地标导航的动平台四旋翼飞行器自主优化降落技术

针对四旋翼飞行器在依靠地标导航完成动平台自主降落任务中存在的目标易丢失、地标定位死区大和降落可靠性差等问题,设计了一种基于复合地标导航的动平台四旋翼飞行器自主优化降落系统。该系统以圆环地标和二维码构成复合地标来解决仅用单一地标定位时存在的定位死区大和定位范围小等问题。针对地标识别丢失、动平台车轮打滑和码盘标定不精确等问题,建立动平台的精确运动模型同时考虑码盘包含未知测量偏差,基于扩展卡尔曼滤波器实现了对动平台连续位姿的在线估计。最终,基于动平台位姿估计结果以最小Jerk指标设计降落轨迹和降落策略,实现了四旋翼飞行器在动平台上高效平稳的降落。为验证所提系统的有效性,设计了仿真和实际降落实验,验证了所提复合地标实现摄像头距离在0.5~6.0 m内的综合完整定位;所设计的动平台状态估计器能在码盘存在未知测量偏差的情况下准确估计出平台的实时位姿,同时所提自主优化降落策略和轨迹规划算法保证了可靠的动平台降落。     

Exploring 2D projection and 3D spatial information for aircraft 6D pose

The 6D pose estimation is important for the safe take-off and landing of the aircraft using a single RGB image. Due to the large scene and large depth, the exiting pose estimation methods have unstratified performance on the accuracy. To achieve precise 6D pose estimation of the aircraft, an end-to-end method using an RGB image is proposed. In the proposed method, the 2D and 3D information of the keypoints of the aircraft is used as the intermediate supervision, and 6D pose information of the aircraft in this intermediate information will be explored. Specifically, an off-the-shelf object detector is utilized to detect the Region of the Interest (RoI) of the aircraft to eliminate background distractions. The 2D projection and 3D spatial information of the pre-designed keypoints of the aircraft is predicted by the keypoint coordinate estimator (KpNet). The proposed method is trained in an end-to-end fashion. In addition, to deal with the lack of the related datasets, this paper builds the Aircraft 6D Pose dataset to train and test, which captures the take-off and landing process of three types of aircraft from 11 views. Compared with the latest Wide-Depth-Range method on this dataset, our proposed method improves the average 3D distance of model points metric (ADD) and 5° and 5 m metric by 86.8% and 30.1%, respectively. Furthermore, the proposed method gets 9.30 ms, 61.0% faster than YOLO6D with 23.86 ms.     

基于自适应变结构控制的着舰导引技术

通过设计随系统状态变化的自适应时变滑模面,使其同时具有好的动态特性和抗干扰能力。提出了运用具有自适应时变滑模面的变结构控制技术,解决飞机着舰时舰尾气流扰动的问题。以纵向自动着舰导引系统为例仿真验证了它的有效性。     

舰载机全自动着舰综述

航母是维护国家主权和海洋权益的重器,舰载机是航母的作战延伸,也是一个国家综合国力的象征。而舰载机着舰的安全性受到多方面因素的影响,因此以美国为首的航母大国一直在探索舰载机的全自动着舰。文中从舰载机全自动着舰的发展过程开始研究,包含全自动着舰引导体制、控制体制、评估方法、以及国外开展全自动着舰的试验情况,探寻全自动着舰评估体系和全自动着舰试验开展情况。最后,总结全自动着舰已有的控制方法,整个全自动着舰的评价体系,分析已有试验的数据,建立一套我国的舰载机着舰方案,用以促进国内 舰载机全自动着舰的发展。     

Wind detection in a microcosm: Ship/aircraft environment sensors

One of the most demanding aspects of a Navy helicopter pilot's job is landing his aircraft on the flight deck of a pitching, rolling, heaving and yawing ship. The complex airwake velocity field associated with the ship and aircraft interface directly affects the pilot's ability to control the aircraft during takeoff, approach, hover, landing, and deck operations. Dynamic Interface (DI) testing is performed to define safe aircraft operational envelopes; however, not all conditions can be realized within the limited test period and asset/condition availability. In addition, exact wind conditions that affect the aircraft cannot be measured with existing wind sensors. These sensors measure wind in the ship's mast area which does not represent the wind flow field encountered by the aircraft. A means of non-intrusively measuring the appropriate wind data is required. This paper presents an overview of the unique aspects of the ship/aircraft interface, the overall naval DI environment and the sensor requirements for measuring this complex environment     

Measuring Aircraft Carrier Flexure in Support of Autonomous Aircraft Landings

This paper quantifies the experimental measurements of aircraft carrier flexure (deformation) at sea in support of the United States Department of Defense sea-based Joint Precision Approach and Landing System (JPALS) that aims to deliver automatic landing capabilities to inbound aircraft aboard aircraft carriers. The methodology for measuring ship flexure using the Global Positioning System (GPS) and inertial sensors is described. Results indicate that flexure on the aircraft carrier used for testing has a standard deviation of approximately 1–2 cm. For the ship tested, the most significant flexure effects are in the port/starboard direction and correlate best with roll or lateral acceleration.     

PAR辅助光电设备的飞机着陆监测与评估系统设计

针对数据链在着陆阶段存在盲区和塔台无法获得着陆飞机实时姿态、接地参数等问题,提出利用多功能光电跟踪技术建立飞机着陆实时监测与评估系统,设计出飞机着陆监测与评估系统的技术方案。由于光电跟踪平台的视场有界,无法保证着陆飞机准确进入光电设备视场,采用精密进场雷达（PAR）牵引光电转台对准即将着陆飞机的方式,辅助光电设备捕获目标飞机,再经过图像检测算法处理,检测出目标飞机,进而转入跟踪锁定,计算出最终下降阶段目标飞机的姿态和偏航信息。详细阐述了该系统的PAR初始化光电设备的方法、步骤。该系统在飞机下降阶段辅助塔台指挥,实现整个着陆过程的监视与评估,满足未来作战飞机精密进近引导的着陆保障和训练要求,具有很高的实用价值。     

直升机/舰船耦合流场的数值模拟

发展了一套基于雷诺平均Navier-Stokes(RANS)方程的直升机/舰船耦合流场数值模拟方法,采用ROEMUSCL格式对交接面通量进行重构,并采用k-ε湍流模型以提高对涡流场的捕捉精度,直升机旋翼等旋转部件的模拟使用动量源模型。然后,以具有典型驱护舰结构的LPD-17及ROBIN直升机的组合为研究对象,从涡量场、速度场及压力场等方面分析了直升机、舰船耦合情形下的流场特征。研究表明,当来流速度V_∞≥4m/s时,舰船流场进入雷诺数自准区,流场速度无因次化量基本保持不变;直升机着舰时,旋翼会与舰船艉部的涡回流区以及甲板两侧的舷涡发生较强的"涡-涡干扰",在上述干扰以及舰面效应的共同作用下,旋翼拉力产生显著的振荡,并呈现出先减小、后增大的变化特征;当着舰位置向舰尾移动时,艉部回流区的影响减弱,旋翼拉力振荡幅度相应减小。最后,对全机状态下的耦合流场进行了模拟,结果显示机身和尾桨对舰艉流场的主要结构影响较小,可用旋翼/舰船耦合流场来进行直升机安全着舰分析,这将显著缩短计算时间。     

Remote-controlled flexible pose measurement system and method for a moving target in wind tunnel

The measurement of position and attitude parameters for the isolated target from a high-speed aircraft is a great challenge in the field of wind tunnel simulation technology. This paper proposes a remote-controlled flexible pose measurement system in wind tunnel conditions for the separation of a target from an aircraft. The position and attitude parameters of a moving object are obtained by utilizing a single camera with a focal length and camera orientation that can be changed based on different measurement conditions. Using this proposed system and method, both the flexibility and efficiency of the pose measurement system can be enhanced in wind tunnel conditions to meet the measurement requirements of different objects and experiments, which is also useful for the development of an intelligent position and attitude measurement system. The position and the focal length of the camera also can be controlled remotely during measurements to enlarge both the vertical and horizontal measurement range of this system. Experiments are conducted in the laboratory to measure the position and attitude of moving objects with high flexibility and efficiency, and the measurement precision of the measurement system is also verified through experiments.     

舰尾流环境中载机纵向QFT/TECS控制系统设计

为了消除舰尾流对载机着舰过程产生的影响,同时完成低动压状态下飞行速度与高度的解耦工作,基于定量反馈理论/总能量控制理论(QFT/TECS)设计了纵向着舰控制系统。针对着舰过程中数学模型所具有的不确定因素及舰尾流对下滑航迹的影响,以载机高度变化率为控制对象,使用定量反馈理论结合推力补偿系统进行了内回路鲁棒控制律设计。外回路控制律设计是以总能量控制理论为基础,通过粒子群优化算法对待调控制参数进行寻优,进而实现了对高度、速度等参数的精确控制,完成了载机纵向着舰轨迹与速度的解耦工作。仿真结果表明,该控制律在拥有较强的鲁棒性的基础上具有良好的解耦控制能力,实现了载机着舰段的高度与速度的解耦控制,明显提高了载机对着舰轨迹的跟踪能力,可满足不确定条件下载机的着舰要求。     

IFSTA自主着舰控制律仿真研究

针对舰载机的自动着舰系统,以IESTA原型机K8飞机为研究对象建立了着舰环境模型,设计了自动着舰控制律,对在着舰阶段的控制作用及影响着舰精度的因素进行了分析和研究,并分别进行了数值仿真和半实物地面仿真验证.研究结果表明,为了使飞机成功完成着舰任务,需满足海况、大气扰动、控制系统带宽频率的最低要求.     

直升机着舰起落架动态响应

舰载直升机着舰过程复杂。与地面降落相比,舰面的不稳定气流使得直升机姿态难以保持,下降的速度更大,且由于直升机通常都是单轮着舰,导致起落架载荷很大。为了研究直升机在不同条件下着舰时起落架的动态响应,建立了机体/起落架/舰船耦合模型,将着舰过程中直升机的运动和舰船的运动联系起来,通过仿真计算得出起落架的动态响应。仿真计算结果表明:直升机着舰质量越大,起落架压缩量和载荷越大;直升机低头着舰会导致前起落架载荷显著增大;直升机着舰下沉速度过大会导致着舰载荷急剧增大,可能会对结构造成破坏。     

飞机自动着陆纵向块对角控制器设计

在阐述了块对角控制理论和分析飞机运动特性的基础上,把飞机纵向运动方程转化为块对角非线性系统,并设计了飞机自动着陆纵向块对角控制器。仿真结果表明,该控制器能够控制飞机自动着陆,跟踪性能良好。     

Automatic landing system using neural networks and radio-technical subsystems

The paper focuses on the design of a new automatic landing system(ALS) in longitudinal plane; the new ALS controls the aircraft trajectory and longitudinal velocity. Aircraft control is achieved by means of a proportional-integral(PI) controller and the instrumental landing system– the first phase of landing(the glide slope) and a proportional-integral-derivative(PID) controller together with a radio-altimeter – the second phase of landing(the flare); both controllers modify the reference model associated with aircraft pitch angle. The control of the pitch angle and longitudinal velocity is performed by a neural network adaptive control system, based on the dynamic inversion concept, having the following as components: a linear dynamic compensator, a linear observer, reference models, and a Pseudo control hedging(PCH) block. The theoretical results are software implemented and validated by complex numerical simulations; compared with other ALSs having the same radio-technical subsystems but with conventional or fuzzy controllers for the control of aircraft pitch angle and longitudinal velocity, the architecture designed in this paper is characterized by much smaller overshoots and stationary errors.     

先进舰载战斗机强度设计技术发展与实践

舰载战斗机是航空母舰上的主要武器,为满足舰面起飞、着舰和停放等要求,舰载机需围绕起落架系统、拦阻钩系统和翼面折叠系统等"特征结构"进行设计。先进舰载战斗机着舰冲击能量是陆基飞机的6倍以上、拦阻带来的水平载荷超过陆基飞机的15倍,因此特征结构的高载荷对强度设计提出了更高的要求。围绕舰载机"特征结构"及"特征载荷",开展了主要的设计工作,包括："特征载荷"计算,即起落架载荷、拦阻载荷和折叠载荷计算;"特征结构"的强度设计及试验验证,包括起落架系统、拦阻系统、翼面折叠系统的动力学仿真计算、静/疲强度分析、折叠翼面的非线性颤振分析以及综合试验验证;"特征载荷"对其他机体结构强度的影响分析,包括着舰载荷对起落架支撑结构强度的影响、拦阻载荷对后机身支撑结构强度的影响、拦阻着舰的全机动力学响应以及着舰载荷与拦阻载荷的共同作用对全机结构强度的影响;体现舰载机"特征结构"强度特点的试验验证方法等。上述研究成果已成功应用于先进舰载战斗机设计中。