三坐标测量机新技术新产品

概要介绍了中国航空精密机械研究所的三坐标测量机新产品和新技术动态,所涉及的新产品有SWIFT系列台式测量机和TUTOR系列三坐标测量机电控系统;叙述了我国自行开发的第一个数控测量机系统软件的功能及主要技术指标;文章还论述了测量机的“系统集成”应用技术,提出了适合我国国情的4种工程模式,并以实例说明已经实现的FA级“测量工作站”。     

分布式电推进飞机电力系统研究综述

继飞机二次能源逐步统一为电能形成多电/全电飞机之后,电推进技术成为飞机动力系统电气化的重要发展方向,有望进一步提高飞机动力系统能量转换效率、降低燃油消耗和排放,代表了航空电气化的高级阶段。飞机电力系统及相关技术是支撑电推进技术发展的重要基础。系统总结了电推进飞机的类型与发展现状,论述了飞机混合动力系统及分布式电推进系统的基本概念、特点与意义。阐述了航空电推进系统的基本结构,比较了适用于分布式电推进系统的电力系统架构,系统分析了实现电推进技术所需的高效高功率密度电机、高效大容量功率变换器和综合热管理等关键技术。小型纯电动飞机正在逐步迈向实用化,而分布式混合电推进技术是中大型飞机电气化的重要方向,仍然需要航空机电和动力系统等交叉融合与创新发展。     

Stirling machines come of age

A brief overview is given of the current status of Stirling machine technology. The first commercial device, a Vuilleumier heat pump, is described. Some potential applications of Stirling engines are examined     

Nonsteady behaviour of solar dynamic power systems with Stirling cycle for space stations

In the first part of this paper, a solar dynamic power system with a Stirling engine for space station application is described. Its unsteady behaviour is theoretically modelled and numerically simulated for four representative orbit configurations. The results are compared to that of a solar dynamic power module with a Brayton gas turbine.In the second part, it is shown that the complex nonsteady behaviour of solar dynamic power modules with either the Brayton cycle or Stirling cycle can be analysed in a simplified way with sufficient accuracy for practical purposes on the basis of parametrizations and simple energy balances.     

Potential starter/generator technology for future aerospaceapplication

This paper presents a search and comparative review of the literature available on variable speed constant frequency (VSCF) technologies. In particular, most of the progress made in the past ten years, using power electronics and electric machines for VSCF systems is reported. Two VSCF systems, based on induction and switched reluctance machine technologies, are presented. The research on the singly- and doubly-fed induction machines has focused on VSCF for wind power generation; whereas, that on switched reluctance machines has been directly studied as a VSCF technology in aircraft system. Results obtained so far favor the switched reluctance machine over the induction machine. Based on the foregoing comparative review, it is recommended that the induction machine be fully investigated as a VSCF drive in aircraft system. The findings should then be compared with the counterpart SRM system. Issues of comparison may include fault tolerance and redundancy, power density, torque requirements, overload ratings, temperature range and cooling, efficiency and stability over expected operating speed range     

Potential starter/generator technologies for future aerospaceapplications

This paper presents a search and comparative review of the literature available on variable speed constant frequency (VSCF) technologies. In particular, most of the progress made in the past ten years, using power electronics and electric machines for VSCF systems, is reported. Two VSCF systems, based on induction and switched reluctance machine technologies are presented. The research on the singly- and doubly-fed induction machines has focused on VSCF for wind power generation, whereas that on switched reluctance machines has been directly studied as a VSCF technology in aircraft systems. Results obtained so far favor the switched reluctance machine over the induction machine. Based on the foregoing comparative review, it is recommended that the induction machine be fully investigated as a VSCF drive for aircraft systems. The findings should then be compared with the counterpart SRM system. Issues of comparison may include fault tolerance and redundancy, power density, torque requirements, overload ratings, temperature range and cooling, efficiency and stability over expected operating speed range     

基于PC/104总线的飞机电源产品综合测试系统

详细介绍了一套基于PC／104总线和虚拟仪器技术的飞机电源产品综合测试系统的功能和软硬件实现原理。阐述了测试系统的设计原理，最后结合整个系统设计介绍了在LabVIEW环境下测试系统软件的设计和实现。     

High Voltage/High Power for Airborne Applications

The Air Force has requirements for large amounts of electrical power at high voltage (up to hundreds of kilovolts) for certain airborne applications. Because of the severe weight and volume constraints, these systems cannot be realized using conventional technology. The Air Force, therefore, has been heavily involved in the development of lightweight power generation and conditioning equipment. Programs have been undertaken to reduce the weight of rotating machines, transformers, switches, inverters, and capacitors. The advances made in these areas are described, and some aspects of the use of these components in the design of lightweight systems are discussed.     

Engine-driven generators for deep space probes

Summarizes important developments relating to power for deep space missions. The important alternatives to thermocouples for converting radioisotope heat into electric power are Stirling engines, alkali-metal thermal-to-electric converters (AMTEC), thermionic converters, and thermo-photovoltaic converters. The operating principles and limitations of these converters are described.     

Permanent-Magnet Linear Alternators Part 1: Fundamental Equations

Powered by free-piston Stirling engines, linear alternators are proposed for space power stations as well as for isolated domestic applications, automotive, and on-Earth solar power plants. As the literature on the subject is sparse and base-design oriented, we present the general equations for both three-phase and single-phase winding configurations having permanent-magnet field excitations.     

新概念下航空产品科研生产流程探讨

随着现代科学技术尤其是信息技术的快速发展 ,航空产品的科研生产出现了一系列新的变化。本文结合我国国情 ,探讨了制定航空产品科研生产流程的新思路 ,并对敏捷制造和精益生产作了较详细的叙述     

The use of closed cycle coolers on space based observatories

Many proposed space based observations will rely on the use of closed cycle and passive cooling systems to provide the thermal environment for high sensitivity. The use of closed cycle mechanical coolers on space telescopes poses particular integration problems; some of these difficulties are discussed in this paper.One of the major problems envisaged is that of exported vibration. This problem, and that of the heat sinking required, can be alleviated by siting the compressors of the Stirling cycle precooler further from the displacer unit. The effect of the separation between the compressors and the displacer on the performance of the Stirling cycle precooler has been measured. Increasing the separation from 170 mm to 565 mm decreases the cooling power at 25 K from 220 mW to 180 mW. In most applications this would be acceptable.The pre-cooler provides cooling at a single point. In situations where refrigeration of extended objects (e.g. telescope mirrors) is required, some distribution method has to be found. A scheme for achieving this is presented together with preliminary calculations on such a system.Temperatures in the region of 2.5 to 4K are required to meet the requirements for long wavelength detectors. We have demonstrated how these temperatures can be achieved in a continuously operating closed cycle cooler that has been engineered for space applications. This cooler consists of a two-stage Stirling cycle precooling a closed cycle Joule-Thomson (JT) stage. Temperatures in the region of 4K are achieved by the use of helium-4 in the JT system. The lighter isotope of helium is used to obtain temperatures down to 2.5 K. Under no-load conditions the precooler reaches a base temperature of 11.3K. The JT system achieves 4.3 K with a 10 mW heat load and 2.5 K with a heat load of over 3 mW. The input power to the cooler is approximately 126 W.The temperature stability of the cooler at low temperatures is important to keep detector drift to a minimum. The temperature of the JT stage has been measured in uncontrolled laboratory conditions and found to vary by only 30 mK over a seventy hour period. The pre-cooler temperature varied by approximately 0.6 K during these measurements.     

高超声速飞机动力需求探讨

近年来,随着高超声速技术的长足进步,特别是在超燃冲压技术逐渐面向工程化的背景下,关于高超声速飞机及其动力系统的讨论也频繁出现。为了在宽速域条件下工作,基于不同热力循环工作模式的组合动力系统相继被提出,高超声速飞机的动力发展形式出现了百花齐放、百家争鸣的局面,也对高超声速飞机动力系统的选型提出了巨大挑战。通过对飞机发展史及高超声速相关发展技术的综述,阐述了现阶段组合动力是高超声速飞机动力主要发展方向这一结论,针对高超声速飞机需求,梳理和分析了几种高超声速组合动力系统的工作原理、工作特性及优缺点,并展望了采用组合动力系统对未来高超声速飞机研究带来的挑战。随着飞行速度的提高,高超声速飞机和动力系统的一体化势在必行。     

国外C／C复合材料致密化工艺的最新进展

介绍了Ｃ／Ｃ复合材料的致密化工艺，包括液相浸渍工艺，气相沉积工艺，气相渗透工艺，以及最新研制的低成本化学气相复合工艺和快速致密化工艺。     

空间电源系统关键技术分析

介绍了空间电源系统的功能及组成结构。在大功率、高可靠性航天器发展应用背景下,从三个方面分析了空间电源系统设计的关键技术。跟踪国际最前沿的空间电源技术动态,指出空间电源系统的发展方向,并详细分析了功率控制模块电路,对后续电源系统的优化设计工作具有参考意义。     

基于产品-服务系统概念的商用飞机研发模式初探

我国商用飞机制造业正面临着市场化的趋势,飞机主制造商的关注点逐步向产品服务延伸,即可持续性发展。纵观飞机产品全生命周期,主制造商对于产品的研制应是面向包含飞机产品、服务产品及整个运营保障维护体系在内的整体化、系统化、综合性的研发工程,即商用飞机产品服务系统。本文基于产品服务系统概念,创造性地提出了有别于传统的、新型商用飞机研发模式的设想。本文介绍的新型商用飞机研发模式是基于系统工程方法,其研发过程主要包含捕获利益攸关方需要、建立产品服务系统功能架构、建立产品与服务功能关系矩阵以及产品服务系统技术解决方案定义共四个关键过程,文中开创性的提出了适用于该研发模式的、面向产品服务功能绩效实现的功能层级分解结构,作为整个研发过程的重要环节。     

High efficiency dynamic radioisotope power systems for spaceexploration-a status report

Background on the space exploration program is discussed, and the currently identified NASA exploration missions are contrasted with the missions that were being planned a year ago. Developments in high-efficiency dynamic radioisotope power systems are discussed: and Brayton and Stirling power conversion cycles are compared for the missions planned for the next decade. Issues related to the use of high-efficiency radioisotope (HER) power systems are identified. It is noted that HER power systems are approximately three times as efficient as current radioisotope thermoelectric generators(RTGs) and are therefore significantly cheaper. Additionally, the world's supply of ²³⁸Pu is extremely limited. Currently discussed missions would cut deeply into this supply if powered by RTGs     

航空发动机分布式控制系统技术分析及系统方案

分析了航空发动机分布式控制系统的系统结构、通讯总线、智能元件、高温电子元器件及分布式电源总线等领域的研究现状,并进行技术成熟度评估.结果表明:航空发动机分布式控制系统研究处于基础研究阶段,各项技术成熟度(TRL)主要处于TRL1~TRL2.针对某涡扇发动机提出基于TTCAN(时间触发控制器局域网协议)总线的过渡分布式和部分分布式两种控制系统方案,分析了各方案中系统结构、控制功能和信号交互特点,以期为航空发动机分布式控制系统进一步研究提供参考.      

Dynamic Modeling of Brushless dc Motors for Aerospace Actuation

A discrete time model for simulation of the dynamics of samarium cobalt-type permanent magnet brushless dc machines is presented. The similation model includes modeling of the interaction between these machines and their attached power conditioners. These are transistorized conditioner units. This model is part of an overall discrete-time analysis of the dynamic performance of electromechanical actuators, which was conducted as part of prototype development of such actuators studied and built for NASA-Johnson Space Center as a prospective alternative to hydraulic actuators presently used in shuttle orbiter applications. The resulting numerical simulations of the various machine and power conditioner current and voltage waveforms gave excellent correlation to the actual waveforms collected from actual hardware experimental testing. These results, numerical and experimental, are presented here for machine motoring, regeneration and dynamic braking modes. Application of the resulting model to the determination of machine current and torque profiles during closed-loop actuator operation were also analyzed and the results are given here. These results are given in light of an overall view of the actuator system components. The applicability of this method of analysis to design optimization and trouble-shooting in such prototype development is also discussed in light of the results at hand.     

飞机电源系统故障诊断方法综述及发展趋势

飞机电源系统是机上一切用电设备的电能来源,其安全性与可靠性至关重要。在环保和高效发展需求的背景下,现代航空工业正在推进以电能为核心的多电/全电飞机技术的研究和应用。电驱动装置和电力电子器件的广泛使用导致飞机电源系统结构的复杂化,对飞机的可靠性、安全性、测试性和维修性提出了更高的要求,研究飞机电源系统的故障诊断技术具有重要意义。首先介绍了飞机电源系统的组成结构和各自功能,概述了飞机电源系统的发展历程,对比了国内外典型电源系统的特征,总结了飞机电源系统中的主要故障模式、故障特点和失效原因,并提出了一种飞机电源健康管理系统的设计架构,然后综述了国内外基于模型和基于数据的故障诊断方法研究进展,从准确度、数据需求量、适用性和实现难易程度等方面评述了各类诊断方法的特点,最后指出了飞机电源系统故障诊断技术面临的挑战和发展趋势。