基于序贯关联算法的多目标无源跟踪

基于序贯关联算法,对多目标无源跟踪问题进行了研究。在只有角度信息可以利用的情况下,首先,利用波门技术对各个无源传感器角度测量数据进行关联和滤波,形成参数航迹;然后,将各个无源传感器的参数航迹送到融合中心进行关联配对,并在关联过程中通过构造关联质量函数对参数航迹的关联历史情况进行度量,解决参数航迹关联模糊问题;最后,通过对关联成功的参数航迹进行交叉定位,给出多个不同目标的位置信息,实现分布式无源系统对多目标的数据关联和跟踪,并通过仿真分析,对算法的有效性和可行性进行验证。     

Efficient multisensor fusion using multidimensional dataassociation

We present the development of a multisensor fusion algorithm using multidimensional data association for multitarget tracking. The work is motivated by a large scale surveillance problem, where observations from multiple asynchronous sensors with time-varying sampling intervals (electronically scanned array (ESA) radars) are used for centralized fusion. The combination of multisensor fusion with multidimensional assignment is done so as to maximize the “time-depth” in addition to “sensor-width” for the number S of lists handled by the assignment algorithm. The standard procedure, which associates measurements from the most recently arrived S-1 frames to established tracks, can have, in the case of S sensors, a time-depth of zero. A new technique, which guarantees maximum effectiveness for an S-dimensional data association (S⩾3), i.e., maximum time-depth (S-1) for each sensor without sacrificing the fusion across sensors, is presented. Using a sliding window technique (of length S), the estimates are updated after each frame of measurements. The algorithm provides a systematic approach to automatic track formation, maintenance, and termination for multitarget tracking using multisensor fusion with multidimensional assignment for data association. Estimation results are presented for simulated data for a large scale air-to-ground target tracking problem     

Track monitoring when tracking with multiple 2D passive sensors

A fast method of track monitoring is presented which determines what tracks are good and what tracks have had data association problems and should be eliminated. The philosophy of tracking in a dense target environment with limited central processing unit (CPU) time is to acquire the targets, track them with as simple a filter as will meet requirements, and monitor the tracks to determine if they are still tracking a target or are tracking incorrect returns and should be terminated. After termination the true targets are reacquired. However, it is difficult to determine from simple track monitoring the correct interpretation of a poor track. Poor tracks can be a result of a sensor failure, target maneuver, or incorrect data association. The author describes track monitoring and provides a solution to this dilemma when tracking with multiple two-dimensional passive sensors. The method is much faster than other monitoring methods.<>     

Performance evaluation of track fusion with information matrixfilter

In a multisensor environment, each sensor detects multiple targets and creates corresponding tracks. Fusion of tracks from these, possibly dissimilar, sensors yields more accurate kinematic and attribute information regarding the target. Two methodologies have been employed for such purpose, which are: measurement fusion and state vector fusion. It is well known that the measurement fusion approach is optimal but computationally inefficient and the state vector fusion algorithms are more efficient but suboptimal, in general. This is so because the state vector estimates to be fused obtained from two sensors, are not conditionally independent in general due to the common process noise from the target being tracked. It is to be noted that there are three approaches to state vector fusion, which are: weighted covariance, information matrix, and pseudomeasurement. This research is restricted solely to performance evaluation of the information matrix form of state vector fusion. Closed-form analytical solution of steady state fused covariance has been derived as a measure of performance using this approach. Note that the results are derived under the assumptions that the two sensors are synchronized and no misassociation or merged measurement is considered in the study. Results are compared with those using Monte Carlo simulation, which was used in the past to predict fusion system performance by various authors. These results provide additional insight into the mechanism of track fusion and greatly simplify evaluation of fusion performance. In addition, availability of such a solution facilitates the trade-off studies for designing fusion systems under various operating conditions     

Fusion of sensors with dissimilar measurement/tracking accuracies

The case of data fusion of sensors dissimilar in their measurement/tracking errors is considered. It is shown that the fused track performance is similar whether the sensor data are fused at the track level or at the measurement level. The case of a cluster of targets, resolved by one sensor but not the other, is also considered. Under certain conditions the fused track may perform worse than the worst of the sensors. A remedy to this problem through modifications of the association algorithm is presented     

An efficient algorithm for multisensor track fusion

An efficient algorithm for track-to-track fusion by incorporating cross-covariance between tracks created by dissimilar sensors is described. An analytical solution of this problem is complicated if cross-correlation between sensors tracking the same target is taken into account. An explicit solution of the cross-covariance matrix at steady state is derived in terms of an integral. It is shown that solution of this integral involves inversion of a matrix whose elements are functions of parameters of individual trackers. Structure of this matrix is analyzed. An efficient analytical solution for inversion of this matrix is obtained. For fusion of similar sensors, it is shown that this matrix is reduced to the Routh-Hurwitz matrix which arises in the study of steady state stability of linear systems. Numerical results showing the amount of reduction of fused track covariance by taking into account the effects of cross-correlation between candidate tracks for fusion is also presented     

基于区实混合序列相似度的异步不等速率航迹关联算法

在分布式多目标跟踪系统中,由于局部传感器开机时间、采样频率以及通信延迟不同等原因,导致来自各传感器的局部航迹往往是异步不等速率的。目前一般的方法是先进行时域配准再进行航迹关联,但是在同步化的过程中,航迹估计值的误差会发生传播,影响航迹关联的性能。针对此问题,提出了一种基于区实混合序列相似度的异步不等速率航迹关联算法。算法首先通过区间数-实数混合序列变换(IRST)得到等长度的航迹行为序列,然后定义一种新的序列差异信息度量,得到混合序列的相似度,以此进行航迹关联判定。仿真实验表明,该算法可以有效地解决异步不等速率航迹关联问题,并且通信延迟和数据乱序对算法性能的影响不明显。     

Tracking of Spawning Targets with Multiple Finite Resolution Sensors

In this paper the problem of tracking multiple spawning targets with multiple finite-resolution sensors is considered and a new algorithm for measurement-to-track association with possibly unresolved measurements is presented. The goal is to initialize new tracks of spawned targets before they are resolved from the mother platform so that one has the ability to carry out early discrimination when they become resolved. The multiple scan data association problem is first formulated as a multidimensional assignment problem with explicit new constraints for the unresolved measurements. Then the top M hypotheses tracking (TMHT) is presented where the state estimates and their covariances are modified based on the M best hypotheses through the assignment solutions. A modification to the assignment problem is developed that leads to a linear programming (LP) where the optimal solution can be a noninteger in [0,1]. The fractional optimal solution is interpreted as (pseudo) probabilities over the N - 1 frame sliding window. The best hard (binary) decision assignment solution and the M best via TMHT are compared with the soft decision solution for 2-D tracking scenarios with various sensor configurations. Based on the simulation results, the soft assignment approach has better track maintenance capability than the single best hard assignment and a performance nearly as good as the TMHT. Its computational load is slightly higher than the single best hard assignment but much lighter than TMHT.     

Reduced state estimators for consistent tracking of maneuvering targets

Linear Kalman filters, using fewer states than required to completely specify target maneuvers, are commonly used to track maneuvering targets. Such reduced state Kalman filters have also been used as component filters of interacting multiple model (IMM) estimators. These reduced state Kalman filters rely on white plant noise to compensate for not knowing the maneuver - they are not necessarily optimal reduced state estimators nor are they necessarily consistent. To be consistent, the state estimation and innovation covariances must include the actual errors during a maneuver. Blair and Bar-Shalom have shown an example where a linear Kalman filter used as an inconsistent reduced state estimator paradoxically yields worse errors with multisensor tracking than with single sensor tracking. We provide examples showing multiple facets of Kalman filter and IMM inconsistency when tracking maneuvering targets with single and multiple sensors. An optimal reduced state estimator derived in previous work resolves the consistency issues of linear Kalman filters and IMM estimators.     

Tracking in Clutter using IMM-IPDA?Based Algorithms

We describe three single-scan probabilistic data association (PDA) based algorithms for tracking manoeuvering targets in clutter. These algorithms are derived by integrating the interacting multiple model (IMM) estimation algorithm with the PDA approximation. Each IMM model a posteriori state estimate probability density function (pdf) is approximated by a single Gaussian pdf. Each algorithm recursively updates the probability of target existence, in the manner of integrated PDA (IPDA). The probability of target existence is a track quality measure, which can be used for false track discrimination. The first algorithm presented, IMM-IPDA, is a single target tracking algorithm. Two multitarget tracking algorithms are also presented. The IMM-JIPDA algorithm calculates a posteriori probabilities of all measurement to track allocations, in the manner of the joint IPDA (JIPDA). The number of measurement to track allocations grows exponentially with the number of shared measurements and the number of tracks which share the measurements. Therefore, IMM-JIPDA can only be used in situations with a small number of crossing targets and low clutter measurement density. The linear multitarget IMM-IPDA (IMM-LMIPDA) is also a multitarget tracking algorithm, which achieves the multitarget capabilities by integrating linear multitarget (LM) method with IMM-IPDA. When updating one track using the LM method, the other tracks modulate the clutter measurement density and are subsequently ignored. In this fashion, LM achieves multitarget capabilities using the number of operations which are linear in the: number of measurements and the number of tracks, and can be used in complex scenarios, with dense clutter and a large number of targets.     

Multi-Target/Multi-Sensor Tracking using Only Range and Doppler Measurements

A new approach is described for combining range and Doppler data from multiple radar platforms to perform multi-target detection and tracking. In particular, azimuthal measurements are assumed to be either coarse or unavailable, so that multiple sensors are required to triangulate target tracks using range and Doppler measurements only. Increasing the number of sensors can cause data association by conventional means to become impractical due to combinatorial complexity, i.e., an exponential increase in the number of mappings between signatures and target models. When the azimuthal resolution is coarse, this problem will be exacerbated by the resulting overlap between signatures from multiple targets and clutter. In the new approach, the data association is performed probabilistically, using a variation of expectation-maximization (EM). Combinatorial complexity is avoided by performing an efficient optimization in the space of all target tracks and mappings between tracks and data. The full, multi-sensor, version of the algorithm is tested on simulated data. The results demonstrate that accurate tracks can be estimated by exploiting spatial diversity in the sensor locations. Also, as a proof-of-concept, a simplified, single-sensor range-only version of the algorithm is tested on experimental radar data acquired with a stretch radar receiver. These results are promising, and demonstrate robustness in the presence of nonhomogeneous clutter.     

Multiassignment for tracking a large number of overlapping objects[and application to fibroblast cells]

In this paper we present a new technique for data association using multiassignment for tracking a large number of closely spaced (and overlapping) objects. The algorithm is illustrated on a biomedical problem, namely the tracking of a group of fibroblast (tissue) cells from an image sequence, which motivated this work. Because of their proximity to one another and due to the difficulties in segmenting the images accurately from a poor-quality image sequence, the cells are effectively closely spaced objects (CSOs). The algorithm presents a novel dichotomous, iterated approach to multiassignment using successive one-to-one assignments of decreasing size with modified costs. The cost functions, which are adjusted depending on the “depth” of the current assignment level and on the tracking results, are derived. The resulting assignments are used to form, maintain and terminate tracks with a modified version of the probabilistic data association (PDA) filter, which can handle the contention for a single measurement among multiple tracks in addition to the association of multiple measurements to a single track. Estimation results are given and compared with those of the standard 2D one-to-one assignment algorithm. It is shown that iterated multiassignment results in superior measurement-to-track association. The algorithms presented can be used for other general tracking problems, including dense air traffic surveillance and control     

Sensor fusion for intelligent alarm analysis

The purpose of an intelligent alarm analysis system is to provide complete and manageable information to a central alarm station operator by applying alarm processing and fusion techniques to sensor information. This paper discusses the sensor fusion approach taken to perform intelligent alarm analysis for the Advanced Exterior Sensor (AES). The AES is an intrusion detection and assessment system designed for wide-area coverage, quick deployment, low false/nuisance alarm operation, and immediate visual assessment. It combines three sensor technologies (visible, infrared, and millimeter wave radar) collocated on a compact and portable remote sensor module. The remote sensor module rotates at a rate of 1 revolution per second to detect and track motion and provide assessment in a continuous 360° field-of-regard. Sensor fusion techniques are used to correlate and integrate the track data from these three sensors into a single track for operator observation. Additional inputs to the fusion process include environmental data, knowledge of sensor performance under certain weather conditions, sensor priority, and recent operator feedback. A confidence value is assigned to the track as a result of the fusion process. This helps to reduce nuisance alarms and to increase operator confidence in the system while reducing the workload of the operator     

A multi-rate sensor fusion approach using information filters for estimating aero-engine performance degradation

Gas-path performance estimation plays an important role in aero-engine health management, and Kalman Filter(KF) is a well-known technique to estimate performance degradation. In previous studies, it is assumed that different kinds of sensors are with the same sampling rate, and they are used for state estimation by the KF simultaneously. However, it is hard to achieve state estimation using various kinds of sensor measurements at the same sampling rate due to a complex network and physical characteristic differences between sensors, especially in an advanced multisensor architecture. For this purpose, a multi-rate sensor fusion using the information filtering approach is proposed based on the square-root cubature rule, which is called Multi-rate Squareroot Cubature Information Filter(MSCIF) to track engine performance degradation. Soft measurement synchronization of the MSCIF is designed to provide a sensor fusion condition for multiple sampling rates of measurement, and a fault sensor is isolated by maximum likelihood validation before state estimation. The contribution of this paper is to supply a novel multi-rate informationfilter approach for sensor fault tolerant health estimation of an aero-engine in a multi-sensor system. Tests are conducted for aero-engine performance degradation estimation with multiple sampling rates of sensor measurement on both digital simulation and semi-physical experiment.Experimental results illustrate the superiority of the proposed algorithm in terms of degradation estimation accuracy and robustness to sensor failure in a multi-sensor system.     

Track-to-track fusion with dissimilar sensors

An analysis is described of a kinematic state vector fusion algorithm when tracks are obtained from dissimilar sensors. For the sake of simplicity, it is assumed that two dissimilar sensors are equipped with nonidentical two-dimensional optimal linear Kalman filters. It is shown that the performance of such a track-to-track fusion algorithm can be improved if the cross-correlation matrix between candidate tracks is positive. This cross-correlation is introduced by noise associated with target maneuver that is common to the tracking filters in both sensors and is often neglected. An expression for the steady state cross-correlation matrix in closed form is derived and conditions for positivity of the cross-correlation matrix are obtained. The effect of positivity on performance of kinematic track-to-track fusion is also discussed     

Radar Measurement Noise Variance Estimation with Several Targets of Opportunity

A number of methods exist to track a target's uncertain motion through space using inherently inaccurate sensor measurements. A powerful method of adaptive estimation is the interacting multiple model (IMM) estimator. In order to carry out state estimation from the noisy measurements of a sensor, however, the filter should have knowledge of the statistical characteristics of the noise associated with that sensor. The statistical characteristics (accuracies) of real sensors, however, are not always available, in particular for legacy sensors. A method is presented of determining the measurement noise variances of a sensor, assumed to be constant, by using multiple IMM estimators while tracking targets whose motion is not known---targets of opportunity. Combining techniques outlined in [2] and [6], the likelihood functions are obtained for a number of IMM estimators, each with different assumptions on the measurement noise variances. Then a search is carried out over a varying grid of IMMs to bracket the variances of the sensor measurement noises. The end result consists of estimates of the measurement noise variances of the sensor in question.     

基于傅里叶变换的航迹对准关联算法

研究了在组网雷达存在系统误差情况下的目标航迹关联问题,理论分析了雷达系统误差对目标航迹的影响,并将该影响表示为目标航迹的旋转和平移量。在此基础上,提出了一种基于傅里叶变换的系统误差配准前航迹对准关联算法,该算法将组网雷达的航迹数据看做为一种整体信息,采用傅里叶变换理论来估计和补偿组网雷达目标航迹数据到融合中心航迹数据的相对旋转量和平移量,将雷达网中雷达上报的目标航迹数据对准到融合中心,从而不依赖于估计雷达网系统误差,实现了误差配准前的航迹准确关联,能够为后端的系统误差配准提供可靠的关联目标航迹数据。     

Bayesian tracking of two possibly unresolved maneuvering targets

The paper studies the problem of maintaining tracks of two targets that may maneuver in and out formation flight, whereas the sensor and measurement extraction chain produces false and possibly unresolved or missing measurements. If the possibility of unresolved measurements is not modelled then it is quite likely that either the two tracks coalesce or that one of the two tracks diverges on false measurements. In literature a robust measurement resolution model has been incorporated within an interacting multiple model/multiple hypothesis tracking (IMM/MHT) track maintenance setting. A straightforward incorporation of the same model within an IMM and probabilistic data association (PDA)-like hypothesis merging approach suffers from track coalescence. In order to improve this situation, the paper develops a track-coalescence avoiding hypotheses merging version for the two target problem considered. Through Monte Carlo simulations, the novel filters are compared with applying hypotheses merging approaches that ignore the possibility of unresolved measurements or track-coalescence.     

Tracking with distributed sets of proximity sensors using geometric invariants

We propose a new approach to forming an estimate of a target track in a distributed sensor system using very limited sensor information. This approach uses a central fusion system that collects only the peak energy information from each sensor and assumes that the energy attenuates as a power law in range from the source. A geometrical invariance property of the proximity of the distributed sensors relative to a target track is used to generate potential target track paths. Numerical simulation examples are presented to illustrate the practicality of the technique.