共查询到20条相似文献,搜索用时 125 毫秒
1.
基于综合航电系统设计中的关键技术———信息融合 ,介绍了信息融合的概念、目标跟踪的算法及传感器的管理 ,以此说明现代作战飞机应用信息融合技术可增强作战平台在恶劣战场环境下的生存能力 相似文献
2.
智能化多传感器管理系统的设计和仿真 总被引:2,自引:0,他引:2
根据机载多传感器管理需求,提出了基于机载多传感器数据融合技术的智能化多传感器管理系统体系结构,并阐述了该系统的功能、系统设计原则和方法。采用商用货价产品技术(COTS)构建原型仿真平台,对提出的多传感器管理系统体系结构进行原型仿真,验证了该设计的有效性。 相似文献
3.
4.
第四代战斗机燃油系统综述 总被引:3,自引:0,他引:3
本文主要从传感器、热管理、系统设计与仿真、综合诊断与保障等方面论述了第四代战斗机燃油系统的技术现状与发展,以及在此基础上向公共管理一体化方向发展的趋势。 相似文献
5.
6.
7.
通过对国内外飞机管路系统设计技术以及传统管路设计制造方法的分析表明,管路数字化设计技术不仅是飞机协同设计的重要环节,也是实现模拟星向数字量转换的有效途径。本文针对管路系统设计技术应川现状,提出了飞机管路系统数字化设计技术应用方案,阐述了实现飞机管路系统数字化设计的技术方法 相似文献
8.
详细介绍基于Raphsody的大型民机系统功能开发流程与方法,及其在民用飞机起落架系统设计中的应用。通过模型的方式对系统建立用例、功能流、时序关系和可用于执行验证的状态机来描述系统,指导大型民机复杂系统设计过程中的需求分析、功能分析和设计综合工作,探索MBSE方法在民机复杂系统设计中的指导作用。 相似文献
9.
10.
深入研究了管路系统全三维关联设计技术的理论及应用,在飞机管路系统设计过程中取消了二维工程图的辅助,采用三维模型对管路系统进行全面的定义,实现了管路系统的全三维关联设计。在很大程度上降低了设计人员的劳动强度,提高了设计效率,该技术的应用对于传统的飞机系统设计是一次巨大飞跃。 相似文献
11.
12.
无线传感器网络节点的设计,对于构成一个实际的无线传感器网络应用系统具有重要意义。本文在对ZigBee协议和无线传感器网络体系结构进行论述的基础上,设计了一种基于ZigBee协议和PIC18F4620单片机的无线传感器网络节点。该节点采用了一款符合IEEE802.15.4标准的ZigBee无线网络芯片CC2420,通过PIC18F4620单片机的SPI接口实现单片机和ZigBee芯片的通讯。文中对该节点开发设计过程中的主要问题进行了较详细的论述,对传感器网络设计与应用具有参考价值。 相似文献
13.
杨鑫 《沈阳航空工业学院学报》2004,21(5):4-6
航空电子设备正逐渐向数字化、智能化方向发展。在飞机燃油测量系统中,传统的液位测量技术已影响了这一趋势的发展。磁致伸缩技术的引入不但解决了这一问题,同时提高了飞机燃油测量系统的测量精度和可靠性。文中通过对采用磁致伸缩技术的液位测量传感器主要结构和工作原理的介绍,分析出这种传感器在航空领域应用的优势和发展前景,并给出应用这一技术的飞机燃油测量系统的电路和软件设计。 相似文献
14.
压力传感器作为民机环控系统中的关重成品件,其性能好坏直接影响飞机空气系统的管理。为保证其装机质量,提升飞机研制和批产效率,设计了一套压力传感器自动测试台,用于压力传感器的性能测试。首先介绍了压力传感器在机上的功能、分类以及性能参数;然后根据其测试特性,分别从硬件构架、设备选型、测试软件以及配套设备等四个方面阐述了压力传感器测试台的设计方案,实现通过测试软件对压力传感器测试压力和温度的自动控制,并在测试压力和温度达到稳定后,自动采集压力传感器输出的电压信号,经过数据处理后生成测试报告并判断测试结果;最后列出了压力传感器测试台的应用范围和意义。 相似文献
15.
针对航空发动机润滑油路磨粒在线监测的静电传感器缺少特性参数与验证方法的问题,根据静电感应基本原理和传感器结构,提出相应的特性参数指标,利用环状探极感应模型进行仿真,并设计和搭建了静电传感器试验系统平台,通过试验对润滑油路静电传感器动态特性进行分析与验证。结果表明:所提特性参数指标可有效反映静电传感器的动态特性;长径比是环状润滑油路静电传感器的重要结构参数,传感器效率随长径比的增大而增大;传感器有效视场也随探极尺寸的增大而增大;所建平台可适用于实物静电传感器动态特性的分析与试验,且具有良好的可重复性。仿真和试验结果对润滑油路静电传感器的设计与应用具有重要的指导意义。 相似文献
16.
超声波焊接在汽车传感器封装中的应用 总被引:1,自引:0,他引:1
利用超声波焊接实现汽车传感器封装,是高效率、低成本的技术。讲述了通过对材料、焊接方法的选择和焊口及工装设计与制造过程设计,来实现汽车传感器封装的方法。最后展望了超声波技术在汽车传感器生产领域的发展应用前景。 相似文献
17.
18.
本文对综合推力矢量飞行/推进控制系统的设计方法进行了研究,在充分考虑了推力矢量飞行、推进子系统之间的相互作用后,建立了带推力矢量综合飞行/推进控制系统的数学模型,结合推力矢量研究的特点,采用鲁棒伺服LQG/LTR设计法,进行控制系统的设计,通过仿真实验,证明设计达到了要求,方法可行 相似文献
19.
Sensor selection and optimization is one of the important parts in design for testability. To address the problems that the traditional sensor optimization selection model does not take the requirements of prognostics and health management especially fault prognostics for testability into account and does not consider the impacts of sensor actual attributes on fault detectability, a novel sensor optimization selection model is proposed. Firstly, a universal architecture for sensor selection and optimization is provided. Secondly, a new testability index named fault predictable rate is defined to describe fault prognostics requirements for testability. Thirdly, a sensor selection and optimization model for prognostics and health management is constructed, which takes sensor cost as objective function and the defined testability indexes as constraint conditions. Due to NP-hard property of the model, a generic algorithm is designed to obtain the optimal solution. At last, a case study is presented to demonstrate the sensor selection approach for a stable tracking servo platform. The application results and comparison analysis show the proposed model and algorithm are effective and feasible. This approach can be used to select sensors for prognostics and health management of any system. 相似文献
20.
Terrestrial inertial navigation is typically performed using an instrumented platform stabilized in a ?local-level? configuration for convenient generation of geographic navigation information. The local-level geographic reference must be maintained by torquing the system gyros, a requirement which may be incompatible with high-precision inertial sensors currently under development. Gyro torquing in a gimballed navigation system can be avoided by employing a ?space-stable? mechanization of the platform where an inertial, rather than geographic, reference is used for navigation calculations. The software design problems associated with this concept, especially those related to the application of Kalman filtering, are the principle focus of this paper. Although the space-stable configuration has been used extensively for spacecraft navigation and guidance, it has not been widely applied to terrestrial navigation, either for air or marine applications. The chief problem in this application is to perform navigation in local-level coordinates, using system outputs generated in an inertial reference frame. It can be demonstrated that, although the navigation system error dynamics are identical for the local-level and space-stable configurations, the dynamics of the sensor errors which drive these systems are quite different. These differences in sensor error propagation characteristics impose new requirements for the design of procedures to accomplish system calibration, alignment, and reset. This paper outlines a Kalman filtering approach which is applicable to all of the above procedures, and presents numerical results to demonstrate its effectiveness. 相似文献