双马来酰亚胺树脂和环氧树脂复合材料在极端温度下的性能对比

文章针对卫星复合材料天线在轨工作的高、低温温度环境,选择了玻璃化温度在220℃以上的双马来酰亚胺树脂和改性增韧环氧树脂作为新一代高模量碳纤维复合材料树脂的候选基体。在常温、极端低温-196℃和高温＋150℃测试了两种树脂基体碳纤维复合材料的力学参数,包括弯曲强度、弯曲弹性模量、层问剪切强度和热膨胀系数等。同时,对统计测试结果进行了分析,对比了两种树脂在温度环境下的性能差异。最后根据强度差异、热膨胀性能差异和工艺过程的复杂性,选择了改性增韧环氧树脂5224作为新一代卫星天线产品碳纤维复合材料的树脂基体材料。     

用于共注射RTM工艺的环氧树脂和酚醛树脂的工艺特性

研究了用于共注射RTM工艺制备承载/隔热/防热一体化复合材料的酚醛树脂和环氧树脂的工艺特性.以苯并噁嗪为防热层的酚醛树脂基体,研究得到了满足共注射工艺条件的环氧树脂体系并确定了共注射的工艺窗口.研究结果表明,以E-44为基体树脂、以GA327改性芳胺为固化剂所构成的环氧树脂体系可作为承载层的基体树脂和苯并噁嗪树脂进行共注射,其共注射的工艺窗口温度为85～90 ℃,在此温度范围内,环氧树脂体系和低粘度保持时间大于20 min,满足了共注射RTM成型一体化复合材料的基本工艺要求.     

烧蚀材料用改性酚醛树脂

简介了几种烧蚀材料用改性酚醛树脂的结构，合成，性能及应用，以酚醛树脂改性已成为烧蚀材料基体树脂的发展方向之一。     

Biological induced corrosion of materials II: New test methods and experiences from mir station

During previous long-term manned missions, more than 100 species of microorganisms have been identified on surfaces of materials (bacteria and fungi). Among them were potentially pathogenic ones (saprophytes) which are capable of active growth on artificial substrates, as well as technophilic bacteria and fungi causing damages (destruction and degradation) to various materials (metals and polymers), resulting in failures and disruptions in the functioning of equipment and hardware.

Aboard a space vehicle some microclimatic parameters are optimal for microorganism growth: the atmospheric fluid condensate with its specific composition, chemical and/or antropogenic contaminants (human metobolic products, etc.) all are stimulating factors for the development of bacteria and mould fungi on materials of the interior and equipment of an orbital station during its operational phase(s).

Especially Russian long-term missions (SALJUT, MIR) have demonstrated that uncontrolled interactions of microorganisms with materials will ultimately lead to the appearence of technological and medical risks, significantly influencing safety and reliability characteristics of individual as well as whole systems and/ or subsystems.

For a first conclusion, it could be summarized, that countermeasures and anti-strategies focussing on Microbial Contamination Management (MCM) for the International Space Station (ISS, next long-term manned mission) at least require a new materials test approach.

Our respective concept includes a combined age-ing/biocorrosion test sequence. It is represented here, as well as current status of MCM program, e.g. continuous monitoring (microbiological analyses), long-term disinfection, frequent cleaning methods, mathematical modeling of ISS, etc.     

High precision composite pipes for SOLAR-B optical structures

The authors have been developing new high thermal conductivity and low moisture absorption composite pipes for high precision space optics applications on the Japanese Institute of Space and Astronautical Science (ISAS) SOLAR-B satellite.Pitch based K13C (Mitsubishi Chemical) high modulus and high conductivity graphite fiber, and EX1515 (Bryte Technology) low moisture absorption cyanate resin, were applied to the pipes.Thermal expansion of the composite pipes was designed to be zero and more uniform in the longitudinal direction in order to obtain long term dimensional stability in the space environment.Model pipes whose length was 500 mm were fabricated and evaluated for thermal and hygroscopic deformation in a new testing apparatus. Equivalent coefficient of thermal expansion of the model pipes was essentially zero (less than 0.1 ppm/°C) and standard deviation of these coefficients was 0.05 ppm/°C. Hygroscopic deformation of the model pipes was under representative conditions 7 ppm over 3 month. The excellent thermal and hygroscopic stability were verified. In addition, thermal conductivity of the model pipes was more than 200 W/(m · K).     

卫星总体优化设计研究

结合传统卫星总体设计思想和现代优化方法，对卫星总体优化设计的概念、研究内容进行了分析，并且提出了卫星总体优化设计流程，即：首先将用户提出的任务目标转化成任务要求，进而进行总体方案类型优选。然后在此基础上进行总体参数优化设计，最后形成满足用户任务目标和任务要求的最佳总体方案设计文件。     

用近红外光谱在线监测炭布/酚醛预浸料的质量指标

用近红外漫反射法对炭布/酚醛预浸料的树脂含量、可溶树脂含量和挥发分含量进行在线监测,通过偏最小二乘法分别建立标准模型,并选择了光谱预处理方法和PLS的因子数。用近红外方法和标准方法对未知样品进行分析,通过t检验结果显示2种方法没有显著差别,利用近红外方法可同时预测3项指标,1 m in内就可分析1个样品,在生产过程中可利用近红外分析的结果调解工艺参数。研究表明,近红外分析是控制炭布/酚醛预浸料质量的有效和准确的方法。     

基于液相污染模型的航天器交会对接羽流污染研究

航天器交会对接任务一般由主动对接方和被动目标配合完成,交会对接飞行的主动寻的段和分离撤离段均可能出现主动对接方开启反向发动机进行反向紧急制动和撤离的情况,该情况下被动目标可能受到来自主动方反向发动机羽流污染影响。文章利用国际空间站羽流污染计算模型对交会对接任务羽流污染沉积进行了分析计算。     

Coupling of system resource margins through the use of electric propulsion: Implications in preparing for the Dawn mission to Ceres and Vesta

The Dawn project is progressing toward its 2007 launch on a mission to orbit main belt asteroids (1) Ceres and (4) Vesta. Designed to provide insights into important questions about the evolution of the solar system, Dawn will spend more than 0.5 years in orbit about each of these bodies. This challenging mission is enabled by an ion propulsion system. In contrast to missions that use conventional chemical propulsion, the use of this system creates a strong coupling of allowable flight system mass and available power, thereby requiring different methods of managing these and other technical resources. Now that the project is nearing launch, the refinement of resource estimates allows the identification of excess margin, which is being applied in novel ways to benefit the project both in development and in operations.     

DSC对苯基苯酚改性酚醛树脂固化机理研究

采用DSC技术、Kissinger法对苯基苯酚改性酚醛树脂的固化过程进行了研究,得到放热峰顶活化能为169.3 kJ/mol,远大于普通酚醛树脂(约70 kJ/mol)。理论近似凝胶温度、固化温度及后处理温度分别为414.5 K、448.9 K和483.9K。酚醛树脂的固化通常由化学反应控制和扩散控制两阶段组成。通过Ozawa法得到活化能与转化率(E-a)的变化关系表明,2种树脂固化历程存在明显差异。普通酚醛树脂固化反应进行到10%(a=10%),粘度迅速增大,反应转向扩散控制;而苯基苯酚改性酚醛树脂固化反应时粘度变化小,直至a=70%,才较快增长。这将有利于小分子的逃逸和各基团充分反应。同时高活化能也表明,反应形成了高键能的化学键,有利于提高树脂的残炭率和烧蚀性能。     

钢与胶粘剂粘接界面的XPS分析

结合氩离子枪刻蚀技术，用X射线电子能谱(XPS)对钢与胶粘剂粘接的界面进行研究，分析了粘接过程中元素的化学环境变化，并对粘接机理进行了探讨。结果表明，胶粘剂中酚醛树脂在界面区域与钢之间存在化学结合，而氯化橡胶与钢之间以范德华力粘接。     

Taiwan's second remote sensing satellite

FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.     

搭建地月鹊桥的嫦娥四号中继星（英文）

The far side of the moon is a unique place for some scientific investigations. Chang'e 4 is a Chinese lunar far side landing exploration mission. Relay communication satellite, named as Queqiao, is an important and innovative part of Chang'e 4 mission. It can provide relay communication to the lander and the rover operating on the lunar far side to maintain their contacts with Earth. It was launched by LM-4 C launch vehicle at the Xichang Satellite Launch Center on May 21, 2018. After five precise orbit controls and a journey of more than 20 days, Queqiao inserted into final halo mission orbit around Earth-moon libration point 2, located about 65,000 km beyond the moon. It is the world's first communication satellite operating in that orbit. Up to now, Queqiao worked very well and provided reliable, continuous communication relay service for the lander and the rover to ensure the mission success of Chang'e 4 exploration mission. Via Queqiao, the lander and the rover were controlled to work by ground stations and obtained a great amount of scientific data. The mission overview, operation orbit selection, relay communication system design and flight profile were introduced in this article.     

Taiwan's second remote sensing satellite

FORMOSAT-2 is Taiwan's first remote sensing satellite (RSS). It was launched on 20 May 2004 with five-year mission life and a very unique mission orbit at 891 km altitude. This orbit gives FORMOSAT-2 the daily revisit feature and the capability of imaging the Arctic and Antarctic regions due to the high enough altitude. For more than three years, FORMOSAT-2 has performed outstanding jobs and its global effectiveness is evidenced in many fields such as public education in Taiwan, Earth science and ecological niche research, preservation of the world heritages, contribution to the International Charter: space and major disasters, observation of suspected North Korea and Iranian nuclear facilities, and scientific observation of the atmospheric transient luminous events (TLEs). In order to continue the provision of earth observation images from space, the National Space Organization (NSPO) of Taiwan started to work on the second RSS from 2005. This second RSS will also be Taiwan's first indigenous satellite. Both the bus platform and remote sensing instrument (RSI) shall be designed and manufactured by NSPO and the Instrument Technology Research Center (ITRC) under the supervision of the National Applied Research Laboratories (NARL). Its onboard computer (OBC) shall use Taiwan's indigenous LEON-3 central processing unit (CPU). In order to achieve cost effective design, the commercial off the shelf (COTS) components shall be widely used. NSPO shall impose the up-screening/qualification and validation/verification processes to ensure their normal functions for proper operations in the severe space environments.     

硼酚醛树脂/丁腈橡胶烧蚀材料性能研究

探讨了硼酚醛树脂/丁腈胶烧蚀材料体系的烧蚀机理,并详细研究了硼酚醛树脂含量对烧蚀材料烧蚀性能、力学性能和加工性能的影响。结果表明,硼酚醛树脂可以显著提高烧蚀材料的耐烧蚀性能,同时对材料的拉伸强度和断裂伸长率有相反的影响,并对胶料具有延迟硫化作用。     

The carbon or silicon colonization of the universe?

At the time of the Apollo Programme, a first human mission to Mars was proposed as early as 1984 with the argument that the higher costs of human exploration would be more than justified by the increased effectiveness of human explorers. This was based on the Apollo experience, where "ground truth" measurements and sampling provided the basis for subsequent unmanned exploration of the Solar System. A human Mars mission is now not seen until 2030, at the end of a series of increasingly sophisticated unmanned probes. Each robot mission not only teaches us something about Mars, but also through experience increases our capabilities for the unmanned exploration of that planet. As a consequence, what a human mission would have to do becomes progressively more demanding. Any extended plan for the human exploration of Space will tend to be overtaken by advances in technology, and if this is not factored into the scenario the proposals will become progressively unrealistic.     

The Urey instrument: an advanced in situ organic and oxidant detector for Mars exploration

The Urey organic and oxidant detector consists of a suite of instruments designed to search for several classes of organic molecules in the martian regolith and ascertain whether these compounds were produced by biotic or abiotic processes using chirality measurements. These experiments will also determine the chemical stability of organic molecules within the host regolith based on the presence and chemical reactivity of surface and atmospheric oxidants. Urey has been selected for the Pasteur payload on the European Space Agency's (ESA's) upcoming 2013 ExoMars rover mission. The diverse and effective capabilities of Urey make it an integral part of the payload and will help to achieve a large portion of the mission's primary scientific objective: "to search for signs of past and present life on Mars." This instrument is named in honor of Harold Urey for his seminal contributions to the fields of cosmochemistry and the origin of life.     

Venus Express—Science observations experience at Venus

The Venus Express mission is the European Space Agency's (ESA) first spacecraft at Venus. It was launched in November 2005 by a Soyuz–Fregat launcher and arrived at Venus in April 2006. The mission covers a broad range of scientific goals including physics, chemistry, dynamics and structure of the atmosphere as well as atmospheric interaction with the surface and several aspects of the surface itself. Furthermore, it investigates the plasma environment and interaction of the solar wind with the atmosphere and escape processes.One month after the arrival at Venus the Venus Express spacecraft started routine science operations. Since then Venus Express has been observing Venus every day for more than one year continuously making new discoveries.In order to ensure that all the science objectives are fulfilled the Venus Express Science Operations Centre (VSOC) has the task of coordinating and implementing the science operations for the mission. During the first year of Venus observations the VSOC and the experiment teams gained a lot of experience in how to make best use of the observation conditions and payload capabilities. While operating the spacecraft in orbit we also acquired more knowledge on the technical constraints and more insight in the science observations and their results.As the nominal mission is coming to an end, the extended mission will start from October 2007. The Extended Science Mission Plan was developed taking into account the lessons learned. At the same time new observations were added along with specific fine-tuned observations in order to complete the science objectives of the mission.This paper will describe how the previous observations influence the current requirements for the observations around Venus today and how they influence the observations in the mission extension. Also it will give an overview of the Extended Science Mission Plan and its challenges for the future observations.     

反导多传感器协同任务规划综述

针对反导作战多传感器协同任务规划的相关问题,结合反导作战的特点,探讨反导作战信息处理过程与多传感器协同任务规划的关系,并分析多传感器协同任务规划的内涵;在此基础上,梳理出多传感器协同任务规划涉及的关键技术,并综述多源信息综合处理、多传感器协同部署、协同跟踪、协同引导和协同识别等关键技术的研究现状;最后就多传感器协同任务规划的发展提出一些建议。     

一种实时测控集群数据处理进程软件控制方法

在基于集群架构的实时测控系统上,通过软件设计实现一种满足数据处理实时性和系统高可用的集群数据处理进程控制方法。计算节点运行的数据处理进程采用多线程设计,对时间驱动线程和数据驱动线程分别设计了工作信号处理流程。实践证明方法不但能够保证计算节点完成数据处理任务的实时性和可靠性,还能动态完成集群节点的任务迁移和故障恢复,提高了测控集群系统的实时性和可用性,从而有效发挥集群系统架构在测控系统中应用的优势。