共查询到20条相似文献,搜索用时 78 毫秒
1.
2.
介绍一种直接驱动阀(DDV)式作动器的余度数字式伺服系统设计与实现,描述了系统的余度配置、设计思想及组成,建立了DDV作动器的结构参数化模型及数字伺服回路的模型,并进行了仿真,分析了作动器动静态特性、采样频率及监控器的设计性能。最后,采用快速原型实时仿真,对余度数字式伺服系统完成了的性能试验验证,结果表明系统性能令人满意。 相似文献
3.
王凤珠 《沈阳航空工业学院学报》2006,23(4):25-27
利用PLC实现电梯的运行控制已被广泛应用,在监控室的上位机监控电梯的运行状态是电梯控制的发展方向.简要分析了电梯监控系统的组成,详细介绍利用PLC实现对四层电梯的运行控制,并采用组态王软件实现电梯监控系统的设计,组态监控系统与PLC控制系统进行实时数据交换,在组态监控画面上能实时反映电梯的运行状态,并能通过监控画面控制电梯运行状态,从而实现对电梯运行状态的双向控制. 相似文献
4.
The Joint STARS phased array radar system is capable of performing long range airborne surveillance and was used during the Persian Gulf war on two E8-A aircraft to fly many around-the-clock missions to monitor the Kuwait and Iraq battlefield from a safe distance behind the front lines. This paper is a follow-on to previous publications on the subject of the Joint STARS antenna and deals mainly with mission performance and technical aspects not previously covered. Radar data of troop movements and armament installations are presented, a brief review of the antenna design is given, followed by technical discussions concerning the three-port interferometry, gain and sidelobe design approach, cost control, range test implementation and future improvements 相似文献
5.
介绍了四氧化二氮毒气浓度监测仪的设计思路和组成结构.通过采用先进的软件设计思想与技术,解决了几个关键问题,成功地研制出了具有声光报警功能的高性能四氧化二氮毒气浓度监测仪. 相似文献
6.
7.
介绍一种防火墙的有效实施方案。该方案是采用C和JAVA两种程序设计语言来实现的,能够有效的对进出网络的数据进行监听和控制。 相似文献
8.
飞机空地逻辑判定和飞行派遣状态判定的重要依据是轮载信号,当前民用飞机飞控系统轮载信号多采用余度表决监控器进行处理,其中余度表决监控器触发时间对飞机的空地状态和派遣状态具有重要影响。空地转换延迟会导致部分系统对当前飞机状态做出错误判断,影响飞机安全,飞机不派遣状态判断的过分严厉会降低航线中飞机的签派率,影响飞机市场竞争力。为了得到轮载信号监控器触发时间的最佳门限值,通过设计一种试验分析方法,得到了飞机轮载信号比较不一致持续时间的范围,再通过分析轮载信号对飞机着陆状态和派遣状态的影响,得到一种选择最佳轮载信号门限值的设计方法。此外,该方法可以进一步推广到其它具有比较监控器处理的信号上,通过试验与分析的方法,得到比较监控器的最佳门限值。 相似文献
9.
Issues involved in the design and implementation of the ground monitor segment Global Positioning System (GPS) are analyzed. In particular, two alternative ground monitoring schemes are presented and compared, one using classified GPS information, and the other not. For each scheme, processing functions that must be performed by the ground monitoring segment are identified, considering both the impact of selective availability on monitoring and the integrity decision concept recommended by the Global Integrity Channel (GIC) Working Group of the Radio Technical Commission for Aeronautics Special Committee-159 相似文献
10.
对于火箭发动机装药包覆胶接状态和包覆层厚度的诊断,利用小波在应有频率与时段上的重构,基本恢复出理想的检测信号,这种检测方法针对层厚处伴有噪声干扰时的微弱信号检测有较好的效果。 相似文献
11.
高职高专毕业设计质量评价探讨 总被引:4,自引:0,他引:4
王津 《西安航空技术高等专科学校学报》2002,20(2):18-21
毕业设计是高职高专教学工作中最主要的实践教学环节,是高职高专教育教学质量的一种综合反映。本针对目前毕业设计中存在的问题,提出了毕业设计质量监控与评价的方法,以促进毕业设计质量的提高。制定毕业设计评价方案时应有一定的针对性、导向性、可操作性、现实性和科学性。在评价内容上,包括毕业设计的质量评价方案、毕业实习教学过程评价方案、毕业设计教学过程评价方案三个主要方面,共三十个评价要素,为使评价工作简单易行,每一个评价指标、评价要素等级标准分为A、B、C、D四个等级,分别表示优秀、良好、合格、不合格。 相似文献
12.
海上动态条件下静电陀螺监控器启动技术 总被引:2,自引:0,他引:2
静电陀螺监控器在航天测量船列装是该设备在国内首次被应用于大型水面舰艇。在此之前其设计方案以及启动策略全部针对于水下舰艇,对于航天测量船而言没有任何经验可以借鉴。因此,探索静电陀螺监控器在海上动态条件下的高精度启动技术成为了当前该设备在航天测量船应用中的主要问题。针对该问题,通过分析静电陀螺监控器启动的关键过程,结合设备工作原理,重点对海上动态条件下静电陀螺监控器的启动技术和相关参数进行了研究,实现了静电陀螺监控器在海上动态条件下的高精度启动。该技术目前已经成熟并且成功应用于测量船测控任务。 相似文献
13.
The original design by J. A. Simpson of the neutron monitor enabled continuous monitoring of the primary cosmic-ray flux by
ground-based recordings of the nucleonic component with only a rather simple correction for atmospheric effects. Simpson (1957)
extended the original pile to the 12 counter IGY neutron monitor which was deployed in a world wide network during the International
Geophysical Year 1957/8. The desirability for monitors with higher counting rates became evident soon afterwards. Subsequently
the NM64 super neutron monitor was designed by H. Carmichael for deployment in time for the International Quiet Sun Year 1964.
Using unusually large 10BF3 proportional counters made at Chalk River, Hatton and Carmichael (1964) studied comprehensively the experimental design of
the NM64. Consequently the efficiency of neutron counters to record evaporation neutrons produced in the lead of a monitor
increased from 1.9% for the IGY to 5.7% for the NM64, an increase of 3.3 times the counting rate per unit area of lead producer.
During the years much attention was given to the neutron multiplicity spectrum in neutron monitors. This spectrum is related
to the energy spectrum of the nucleonic component incident on the neutron monitor, but is only weakly dependent on the spectrum
of galactic cosmic rays at the top of the atmosphere. Contrary to galactic cosmic rays, solar flare protons and neutrons are
observed predominantly as single counts per interaction, in multiplicity 1, because of the softness of solar flare particle
energy spectra. Neutron monitors have also been specially designed to record solar neutrons with increased sensitivity. Newly
developed 3He counters with a largely reduced thermal neutron absorption mean free path should lead to improved efficiency in recording
primary cosmic radiation. Design criteria are discussed.
This revised version was published online in August 2006 with corrections to the Cover Date. 相似文献
14.
传统的安全性分析方法,受到分析人员自身技能和经验等因素的影响,容易疏漏系统的失效状态或误判失效的影响。模型检验使用严格的数学方法推理,能够验证产品的规范或设计是否符合要求。将模型检验引入飞机系统安全性分析中,基于模型检验工具NuSMV建立安全分析平台,并以+5V电源监控系统为例,对其安全性进行了分析。 相似文献
15.
基于光吸收原理的BX型粉尘浓度测试仪的设计 总被引:1,自引:0,他引:1
BX型粉尘浓度测试仪是一种用于测定空气环境中浮游粉尘浓度的专用仪器,主要用于工矿企业、石油化工、劳动安全、劳动卫生及环境保护等部门的粉尘监测。在实际生产及人们的生活中起着其它产品无法替代的作用。主要介绍了BX型粉尘浓度测试仪的光学测量原理、光电检测器件的选取原则及与其相匹配的前置放大电路的设计以及其后续电信号的处理方法。 相似文献
16.
17.
余度管理中故障监控门限值的选取 总被引:1,自引:0,他引:1
本文讨论了余度管理中故障监控门限值的选取。门限值的选取对监控系统性能有很大影响。本文通过分析的方法求门限值的最优值。该方法具有一定的准确性,可以作为实际选取门限值的参考。 相似文献
18.
19.
An input filter is frequently employed between a switching regulator and its power source. However, its presence often results in degradation of dynamic performances and stability. The detrimental interaction is between an input filter and a switching regulator and is a function of the input filter parameters and also of the supply voltage. An earlier paper presented an analysis and design procedure aimed at developing a feed-forward loop to cancel this undesirable interaction. The feed-forward design is extended here to encompass a scheme that automatically accounts for changes in the supply voltage; the result is an adaptive compensation that tracks the input voltage variations. Experimental results are presented that confirm the adaptive nature of the design. 相似文献
20.
Test results judgment method based on BIT faults 总被引:1,自引:0,他引:1
《中国航空学报》2015,(6)
Built-in-test(BIT) is responsible for equipment fault detection, so the test data correctness directly influences diagnosis results. Equipment suffers all kinds of environment stresses, such as temperature, vibration, and electromagnetic stress. As embedded testing facility, BIT also suffers from these stresses and the interferences/faults are caused, so that the test course is influenced,resulting in incredible results. Therefore it is necessary to monitor test data and judge test failures.Stress monitor and BIT self-diagnosis would redound to BIT reliability, but the existing antijamming researches are mainly safeguard design and signal process. This paper focuses on test results monitor and BIT equipment(BITE) failure judge, and a series of improved approaches is proposed. Firstly the stress influences on components are illustrated and the effects on the diagnosis results are summarized. Secondly a composite BIT program is proposed with information integration, and a stress monitor program is given. Thirdly, based on the detailed analysis of system faults and forms of BIT results, the test sequence control method is proposed. It assists BITE failure judge and reduces error probability. Finally the validation cases prove that these approaches enhance credibility. 相似文献