西安航空学院专业介绍

<正>动力工程系建筑环境与能源应用工程培养目标:本专业培养具备建筑人工环境控制技术和能源供给系统等方面知识,能够在航空企业、建筑设施智能化工程公司、制冷空调系统设计研究部门、设备制造企业等单位,从事制冷与空调系统的设计、施工、调试、运行管理等方面工作的高级工程技术人才。学生主要学习建筑环境学、流体力学、工程热力学、传热学、电工电子学等制冷空调工程技术基础知识,接受制冷空调系统的     

集中式空调系统空气净化方法浅析

近几年，作为室内环境温度调节的高效、节能的集中式空调系统普遍应用于各类建筑物中，它逐步取代了室内窗式和挂式空调机。集中式空调系统的投入使用，给人们的工作、生活、娱乐营造了美好和舒适的环境。     

基于联合仿真的飞机空调系统故障影响

飞机空调系统是飞机的重要组成部分,由于其在飞行过程中环境和工作参数变化较大,易于受到多种因素的影响而成为故障率较高的飞机系统之一。飞机空调系统故障主要发生在飞行过程中,在地面状态难以复现,因此基于联合仿真的飞机空调系统故障影响分析对飞机设计验证和地面维修具有重要意义。首先根据飞机空调系统原理建立了冲压空气进气口模型、发动机压气机模型、压力调节与预冷组件模型、制冷组件模型;然后基于AMESim-Simulink联合仿真平台,模拟飞行过程中空调系统组件性能动态变化过程;最后对典型故障如预冷器泄漏、预冷器空气活门卡死、压力传感器冲击、冲压空气进气作动筒卡死等故障进行模拟,再现了飞行过程中空调系统故障情况,分析了空调组件性能的变化过程。     

西安航空学院专业介绍 动力工程系

建筑环境与能源应用工程 培养目标：本专业培养具备建筑人工环境控制技术和能源供给系统等方面知识，能够在航空企业、建筑设施智能化工程公司、制冷空调系统设计研究部门、设备制造企业等单位，从事制冷与空调系统的设计、施工、调试、运行管理等方面工作的高级工程技术人才。     

E190飞机空调温控系统无故障信息故障模式分析

飞机空调温控系统对飞机运行品质有着重要的影响.本文以E190飞机为研究对象,梳理机队运行数据,基于空调温控系统工作原理分析其故障模式以及排除方法,为同机型或同类型温控系统的日常维护、排故提供参考.     

波音737-800空调制冷故障分析及健康监测

空调系统为机组、旅客和设备提供飞机内部环境系统,空调性能好坏直接影响旅客乘坐舒适性及设备正常工作。高温时空调制冷需求高,而空调故障频发,常常影响飞机安全运行。随着机队规模不断增加,如何高效管控空调系统运行状况,是摆在航司面前的重要技术课题。以波音737-800为研究对象,利用飞机维护手册(aircraft maintenance manual,简称AMM)和故障隔离手册(fault isolation manual,简称FIM),介绍空调制冷原理,深入剖析影响制冷性能的典型故障,并给出管控措施。介绍了空调健康监测方案和实施途径,通过机队应用实践,该方案能有效监控空调制冷性能,大大提高维护效率,保障航班运行,提升自主创新能力,为企业赢得声誉。     

基于仿真技术的空调系统冲压空气能耗研究

简要介绍了开展民用飞机空调系统仿真分析及研究的重要意义和空调系统工作原理。建立了民用飞机空调系统主要部件的数学模型,开发了系统部件仿真模块及驾驶舱/客舱热载荷模块等,用搭建的部件模块组建了某民用飞机空调系统仿真模型,完成了仿真计算算例。对仿真算例进行试验验证以修正仿真模型,应用修正的仿真模型预测民用飞机整个飞行剖面内空调系统的冲压空气流量,同时采用标准计算方法评估空调系统冲压空气能耗,为空调系统的冲压设计提供依据,对飞机空调系统设计、优化及适航符合性验证具有重要的参考意义。     

仿真技术在飞机起落架可靠性分析中的应用研究

起落架所承受的动载荷较大,造成系统工作环境复杂,出现故障较多,因此对起落架系统可靠性的研究显得迫切和重要。以三维辅助建模软件CATIA、有限元分析软件NASTRAN、多体动力学分析软件LMS Virtual．Lab和液压控制仿真软件AMESim等为工具,采用自动仿真求解策略针对某起落架典型失效模式进行仿真分析,得到仿真...     

空间飞行器综合定轨与参数分析软件COMPASS的研发——需求分析

对空间飞行器精密定轨软件COMPASS的开发作了详细的需求分析,包括软件功能、定轨模式、可分析的数据类型、参数解算、运行环境等,以便为COMPASS软件系统的设计提供依据。     

毛细管平面辐射空调系统节能技术

目的如何实现空调系统更好的节能环保;方法介绍地源热泵工作原理以及它在毛细管平面辐射空调系统中的应用;结果指出将地源热泵技术用在毛细管平面辐射空调系统中;结论为空调系统的节能与环保提供了新的发展方向。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.