磁等离子体发动机中离子回旋共振加热多组分流体模拟

离子回旋共振加热（Ion Cyclotron Resonance Heating,ICRH）单元的加热效果对磁等离子体发动机（Magnetoplasma Rocket Engine,MPRE）的推力性能有至关重要影响。为研究ICRH的加热效果,本文建立了用于模拟MPRE中ICRH单元的二维轴对称多组分流体模型,并采用该模型对MPRE中螺旋波等离子体源的工作模式与不同输入条件的ICRH单元进行了模拟。计算结果表明：螺旋波等离子体源在放电过程中要经历从Trivelpiece-Gould (TG)波模式向螺旋波模式的转变过程,模式转变时电子温度出现峰值,等离子体密度迅速上升;开启ICRH输入后,电子参数基本不变,离子温度有明显提升,表明ICRH单元对离子有显著加热效果;此外,离子温度随ICRH输入增大而升高,ICRH输入电流150A时,离子温度可达50eV以上。     

民用飞机甚高频通信天线设计

作为民用飞机甚高频(Very High Frequency,以下简称VHF)通信系统的重要组成部分,VHF通信天线不仅辐射和接收电磁波,还要进行能量转换。VHF通信天线的设计直接影响通信中射频能量的分布,进而影响通信质量和飞行安全。简要介绍了VHF通信系统,并在给出VHF通信天线设计要求的基础上,通过工程实例分析了VHF通信天线的设计过程,最后总结了VHF通信天线设计的特点。     

一种可齐平安装的机载复合结构宽带天线的设计

设计了一种可齐平安装的宽带超高频(UHF)天线.该天线由含有背腔结构的盘锥天线、盘锥顶盘与地板之间的短路结构、以及多板天线3个部分复合而成.这3个部分分别在频率的中端、低端和高端产生3个邻近的独立谐振点,从而有效地展宽了天线的工作带宽.分析了天线各主要结构参数对谐振频点和阻抗带宽的影响,给出了这些参数的最优值,并据此制...     

机载气象雷达的使用与维护

现代机载气象雷达的很大改进之一就是雷达天线。早期的气象雷达多使用抛物面天线,而现代机载气象雷达普遍采用平板缝隙式天线。平板缝隙式天线与抛物面天线最重要的性能差别就是其方向性图。通过选择合适的天线面积,平板缝隙式天线可以具备很尖锐的方向性波束,能量高度集中在主波瓣上,旁瓣能量很少。这     

远场天线测试系统的研究与实现

针对天线参数测试过程及测试要求,分析天线参数测试中的主要问题,研究实际测试过程中环境因素对天线参数测量结果的影响,提出了一种基于虚拟仪器技术的远场天线性能参数自动测试系统的设计方案,详细阐述了该方案的系统组成部分与工作原理,包括矢量网络分析仪、天线测试转台与吊杆的控制原理以及数据采集的时序设计,结合Matlab实现了对影响因素的误差补偿与天线性能参数的测试计算方法,利用数据库技术实现天线测试数据的存储、读取与报告打印,通过现场测试试验验证了该方案的可靠性与可行性。     

多天线结构对无人机MIMO信道容量的影响

为进一步提高无人机(UAV)遥测链路传输容量,分析了无人机多输入多输出(UAV-MIMO)天线间隔、阵列等结构参数对信道容量的影响。建立了无人机MIMO基于散射体三维几何分布的单跳同心椭圆(GBSBCERS)信道模型,结合机载MIMO天线布局方案,给出了无人机MIMO信道矩阵及遍历容量的表达式。数值仿真表明,受无人机远距离通信的影响,信道容量与天线间隔呈正比变化;且相比于线阵布局,圆阵布局虽然受到无人机姿态变化的影响,但仍具有较高的信道容量。通过分析多天线结构对无人机MIMO信道容量的影响,对设计实现高速无人机数据链具有实际意义。     

共形阵列天线单元极化形式的优化设计

由于共形载体曲率的影响,共形阵列天线的阵列流形具有多极化特性.为了利用共形天线阵列流形的多极化特性,提升阵列对空间目标参数的估计性能,将天线单元的极化参数引入到导向矢量建模中.更加完整地论述了共形天线阵列流形的特点.在此基础上.建立了优化设计天线单元极化形式的目标函数,基于交替优化思想.给出了共形阵列中各天线单元最优极...     

基于HFSS的机载天线方向图研究

简要分析了机体结构对机载天线方向图的影响,并采用HFSS软件的高频积分方程(HFSS-IE)求解器对甚高频(VHF)频段的天线进行仿真,对比不同位置处天线方向图变化,分析了方向图变化的产生原因,可在早期飞机研发设计中为天线布置提供参考。     

多基地雷达系统收发距离的研究

多基地雷达系统的用途及许多方面都不同于单基地雷达系统。本文能帮助读者掌握多基地雷达系统之优劣。文中阐明了双基地雷达中与收、发距离有关的几个几何关系,如覆盖范围、定位精度及多卜勒信息处理等。为了简明起见,以单基地雷达的最大作用距离(R_mm)作为主要的基准参数。用电子装置控制天线扫描的系统特别适用于多基地雷达,因此,本文也讨论了天线边射取向的影响及平面阵列天线固有的增益和波束宽度与扫描控制角的关系。     

机载无线电罗盘垂直天线电参数分析

从机载无线电罗盘垂直天线的实际应用出发，首先对垂直天线的电参数进行了简单的介绍和说明，然后依据等效电路理论对天线的各项参数的相互关系进行了详细的分析和推导，并列举了相关的试验方法和试验结果，进一步说明了垂直天线电性能是其相关电参数折衷的结果，最后对非独立垂直天线设计中的关键问题提出了相关建议。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.