非合作无源探测中的假设检验弱目标检测方法

在非合作无源探测系统中,弱目标回波不仅会受到强直达波、强多径的干扰,还会受到强目标的掩盖干扰,因此很难对其进行有效检测。为了解决这一问题,提出了一种基于多择复合假设检验的弱目标检测方法。首先将接收信号投影到多径干扰的正交补子空间内,以消除强直达波和强多径干扰,然后将目标检测看作一个多择复合假设检验问题,建立了与之相应的基本框架模型,利用最大后验估计方法对目标时延、多普勒频移及信号幅度等参数进行估计,构造检验统计量,设置相应的门限,根据假设检验结果,逐个消除强目标干扰从而达到检测弱目标的目的。仿真结果表明,本方法可以有效抑制强直达波、强多径及强目标干扰,有效检测出弱目标,且虚警率低。     

一种机动多目标雷达视频信号模拟器的设计

给出了一种机动多目标雷达视频信号模拟器的软硬件设计方案,它可实时输出所需的多个动目标雷达视频信号,雷达信号的类型、目标的数量、目标的回波特性、目标的运动特性、杂波的类型及参数等均可方便地进行设置。该模拟器可满足各种雷达信号处理算法(如杂波抑制、恒虚警检测、动目标跟踪、多基地数据融合等)的测试与效果分析,以及对雷达信号处理机等进行性能调试与测试的需要。     

Distributed target detection in compound-Gaussian noise with Rao and Wald tests

The problem of detecting distributed targets in compound-Gaussian noise with unknown statistics is considered. At the design stage, in order to cope with the a priori uncertainty, we model noise returns as Gaussian vectors with the same structure of the covariance matrix, but possibly different power levels. We also assume that a set of secondary data, free of signal components, is available to estimate the covariance matrix of the disturbance. Since no uniformly most powerful test exists for the problem at hand we devise and assess two detection strategies based on the Rao test, and the Wald test respectively. Remarkably these detectors ensure the constant false alarm rate property with respect to both the structure of the covariance matrix as well as the power levels. Moreover, the performance assessment, conducted also in comparison with the generalized likelihood ratio test based receiver, shows that the Wald test outperforms the others and is very effective in scenarios of practical interest for radar systems.     

Tracker and signal processing for the benchmark problem with unresolved targets

Radar signal processing is particularly important in tracking closely spaced targets and targets in the presence of sea-surface-induced multipath. Closely spaced targets can produce unresolved measurements when they occupy the same range cell of the radar. These issues are the salient features of the benchmark problem for tracking unresolved targets combined with radar management, for which this paper presents the only complete solution to date. In this paper a modified version of a recently developed maximum likelihood (ML) angle estimator, which can produce two measurements from a single (unresolved) detection, is presented. A modified generalized likelihood ratio test (GLRT) is also described to detect the presence of two unresolved targets. Sea-surface-induced multipath can produce a severe bias in the elevation angle measurement when the conventional monopulse ratio angle extractor method is used. A modified version of a recently developed ML angle extractor, which produces nearly unbiased elevation angle measurements and significantly improves the track accuracy, is presented. Efficient radar resource allocation algorithms for two closely spaced targets and targets flying close to the sea surface are also presented. Finally, the IMMPDAF (interacting multiple model estimator with probabilistic data association filter modules) is used to track these targets. It is found that a two-model IMMPDAF performs better than the three-model version used in the previous benchmark. Also, the IMMPDAF with a coordinated turn model works better than the one using a Wiener process acceleration model. The signal processing and tracking algorithms presented here, operating in a feedback manner, form a comprehensive solution to the most realistic tracking and radar management problem to date.     

有源对消隐身系统设计研究

针对有源对消隐身要求的系统延时短、反应速度快、信号参数测量和对消波幅相控制精度高的特点,设计了一个基于相控阵技术、数字射频存储器(DRFM)和现场可编程门阵列(FPGA)的有源对消系统。为了解决目标雷达散射截面计算量太大、不能有流水线延迟和难以实现实时计算等问题,采用离线计算的方法,预先建立目标的全向雷达散射截面(RCS)数据库、杂波数据库和噪声数据库,由FPGA根据测得的雷达信号参数在数据库中查找到相应的目标回波数据,实时调整对消波的幅度和相位,使对方的雷达接收机始终处于合成方向图的零点。最后通过仿真计算验证了该设计方案的有效性。     

CFAR detection of distributed targets in non-Gaussian disturbance

The subject of detection of spatially distributed targets in non-Gaussian noise with unknown statistics is addressed. At the design stage, in order to cope with the a priori uncertainty, we model noise returns as Gaussian vectors with the same structure of the covariance matrix, but possibly different power levels (heterogeneous environment). We also assume that a set of secondary data, free of signal components, is available to estimate the correlation properties of the disturbance The proposed detector assumes no a priori knowledge about the spatial distribution of the target scatterers and ensures the constant false alarm rate (CFAR) property with respect to both the structure of the covariance matrix and the power levels. Finally, the performance assessment, conducted modeling the disturbance as a spherically invariant random process (SIRP), confirms its validity to operate in real radar scenarios     

Adaptive digital beamforming for angle estimation in jamming

A radar digital beamforming (DBF) architecture and processing algorithm is described for nulling the signal from a mainlobe electronic jammer and multiple sidelobe electronic jammers while maintaining monopulse angle estimation accuracy on the target. The architecture consists of a sidelobe jamming (SLJ) cancelling adaptive array (AA) followed by a mainlobe jamming (MLJ) canceller. A mainlobe maintenance (MLM) technique or constrained adaptation during the sidelobe cancellation process is imposed so that the results of the SLJ cancellation process do not distort the subsequent mainlobe cancellation process. The SLJ signals and the MLJ signals are thus cancelled sequentially in separate processes. This technique was developed for improving radar processing in determining the angular location of a target, and specifically for improving the monopulse technique by maintaining the accuracy of the target echo monopulse ratio in the presence of electronic jamming by adaptive suppression of the jamming signals before forming the monopulse sum and difference beams     

自寻的导弹攻击机动目标的最优制导规律的研究及实现

提出一种适用于红外和雷达自寻的制导导弹的适应性强、制导精度高、易实现的最优制导规律。为解决工程实现的关键问题,提出了目标机动加速度模型。根据该模型并利用导弹导引头的AGC信号或雷达测距信号,给出了目标机动加速度、导弹与目标相对距离和距离变化率的估计算法。     

高距离分辨率的低截获概率雷达信号性能研究

首先,分析步进频率雷达信号实现高分辨率的优缺点,在此基础上设计了一种改进的步进频率信号-参差脉冲重复间隔步进频率信号;然后,分析了该信号的处理过程。与步进频率信号在高速目标下成像失真相比,参差脉冲重复间隔步进频率信号的多普勒性能有了很明显的改善。最后,分析了参差脉冲重复间隔步进频率信号的低截获概率特性。     

Calibration of complex polarimetric SAR imagery using backscattercorrelations

A technique for calibration of multipolarization synthetic-aperture radar (SAR) imagery is described. If scatterer reciprocity and lack of correlation between co- and cross-polarized radar echoes (for azimuthally symmetric distributed targets) are assumed, the effects of signal leakage between the radar data channels can be removed without the use of known ground targets. If known targets are available, all data channels can be calibrated relative to one another and radiometrically as well. The method is verified with simulation and application to airborne SAR data     

Low-Angle Radar Tracking in the Presence of Multipath

This paper is concerned with the problem of tracking radar targets in the low-angle regime where conventional tracking radars encounter difficulty due to the presence of a surface-reflected ray. Starting with a classical maximum-likelihood analysis of the problem of two closely spaced targets, two different techniques are evolved which are theoretically capable of dealing with the multipath problem. The expected accuracy has been studied both analytically and by means of computer simulations. Experimental programs have demonstrated the feasibility of both techniques. The paper also includes a discussion of certain alternative solutions to the problem.     

HRR Detector for Slow-Moving Targets in Sea Clutter

The radar detection of targets in the presence of sea clutter has historically relied upon the radial velocity of targets with respect to the radar platform either by exploiting the relative target Dopplers (for targets with sufficient radial velocity) or by discerning the paths targets traverse from scan to scan. For targets with little to no radial velocity component, though, it can become quite difficult to differentiate targets from the surrounding sea clutter. This paper addresses the detection of slow-moving targets in sea clutter using a high resolution radar (HRR) such that the target has perceptible extent in range. Under the assumption of completely random sea clutter spikes based on an epsiv-contaminated mixture model with the signal and clutter powers known, optimal detection performance results from using the likelihood ratio test (LRT). However, for realistic sea clutter, the clutter spikes tend to be a localized phenomenon. Based upon observations from real radar data measurements, a heuristic approach exploiting a salient aspect of the idealized LRT is developed which is shown to perform well when applied to real measured sea clutter.     

Adaptive pulse compression via MMSE estimation

Radar pulse compression involves the extraction of an estimate of the range profile illuminated by a radar in the presence of noise. A problem inherent to pulse compression is the masking of small targets by large nearby targets due to the range sidelobes that result from standard matched filtering. This paper presents a new approach based upon a minimum mean-square error (MMSE) formulation in which the pulse compression filter for each individual range cell is adaptively estimated from the received signal in order to mitigate the masking interference resulting from matched filtering in the vicinity of large targets. The proposed method is compared with the standard matched filter and least-squares (LS) estimation and is shown to be superior over a variety of stressing scenarios.     

高斯非平稳机动目标波达角模型及跟踪

在实际的跟踪情况中,由于环境条件、目标反射截面等因素的变化,回波信号的功率会随时间变化,即不满足通常阵列信号处理中对高斯信号作平稳性的假设。针对复杂运动条件下高斯非平稳目标的跟踪问题,提出了一种新的机动目标波达角(DOA)模型。该模型全面地刻画了高斯非平稳机动目标的动态,并将目标的DOA和信号功率作为状态变量进行了联合考虑,同时运用虚拟阵列的表示方法构建了相应的观测方程。对于建立的新模型,最后采用无迹卡尔曼滤波(UKF)的框架完成了整个跟踪算法。分析和仿真结果表明,当高斯非平稳机动目标之间存在长时间相互接近的情况时,新方法仍然可以获得较好的跟踪性能。     

Sum-difference Reduced-dimensional Processing in SAR Image Domain and Statistical Analysis for Ground Moving Target Indication

In this article, a new reduced-dimensional adaptive processing algorithm based on joint pixels sum-difference data for clutter rejection is proposed. The sum-difference data are obtained by orthogonal projection of the joint pixels data of different synthetic aperture radar (SAR) images generated by a multi-satellite radar system. In the sense of statistical expectation, the sum-differ- ence data contain the common and different information of the SAR images. Therefore, the objective of clutter cancellation can be achieved by adaptive processing. Moreover, based on the residual image after clutter rejection, statistical analysis of constant false-alarm rate (CFAR) detection of moving targets is also presented. Simulation results demonstrate the effectiveness and robustness of the proposed algorithm even with heterogeneous clutter and image co-registration error.     

Coherent detection of radar targets in a non-gaussian background

The problem of detecting radar targets against a background of coherent, correlated, non-Gaussian clutter is studied with a two-step procedure. In the first step, the structure of the amplitude and the multivariate probability density functions (pdfs) describing the statistical properties of the clutter is derived. The starting point for this derivation is the basic scattering problem, and the statistics are obtained from an extension of the central limit theorem (CLT). This extension leads to modeling the clutter amplitude statistics by a mixture of Rayleigh distributions. The end product of the first step is a multidimensional pdf in the form of a Gaussian mixture, which is then used in step 2. The aim of step 2 is to derive both the optimal and a suboptimal detection structure for detecting radar targets in this type of clutter. Some performance results for the new detection processor are also given     

Low-cost technology for multimode radar

A flexible test bed radar architecture is described which includes an integrated RF electronics package that can support multiple radar applications, including surveillance, fire control, target acquisition, and tracking. This type of architecture can significantly reduce the cost, power, size, and weight of electronics on future weapon delivery platforms. The Army Research Laboratory (ARL) is developing technology to support multimode radar requirements. These requirements include the detection and location of moving or stationary low radar cross section targets in heavy ground clutter and the classification and/or recognition of these targets. We address these requirements with commercial-off-the-shelf (COTS) products and the integration of several enabling technologies. The test bed radar includes a direct digital synthesizer (DDS) for frequency-diverse waveform generation, a flexible wideband transceiver for bandwidth extension and frequency translation, and an open architecture signal processor with embedded wideband analog-to-digital converters for real-time acquisition and processing. Efficient signal processing algorithms have been developed to demonstrate multimode radar capability. This paper discusses the various subassemblies, algorithm efficiency, and field experiment results     

基于广义S变换进行雷达信号时频滤波去噪

S变换自问世以来,凭借其优越性已经被广泛地应用于数字信号处理中。针对深空目标雷达回波信号的复杂性,为了得到较好的雷达回波信号,将基于广义S变换的时频滤波应用于雷达回波信号去噪中,并利用低通滤波器设计了时频滤波算子,克服了传统滤波去噪方法滤波因子不能随时间、频率变化而变化的缺陷。通过理论分析与仿真波形对比表明,滤波后能有效地去除噪声,很好地保留了原始雷达回波信号的信号特征,展示了基于广义S变换的时频滤波的可行性,为雷达回波信号去噪提供提供了一种很好的方法。     

Beam Shape Loss and Surveillance Optimization for Pencil Beam Arrays

A radar in its surveillance mode requires the programming of the radar beam in fixed angular increments throughout the surveillance volume. Though radar coverage of the volume is complete, returns from possible targets differing only in angular position generally have unequal signal strengths. This is due to both beam shape and multiple beam coverage. The resulting nonuniformity in signal strength results in a loss factor termed beam shape loss (BSL). This correspondence contains the results of a valid computational procedure for determining this loss factor for the case of an electronically steerable array in a search mode. Results consist of curves showing BSL for a wide range of system parameters and for various target types. In addition, it is shown how optimum search beam locations can be determined from the BSL computations.