The 11~(th) International Workshop on Piezoelectric Materials and Applications in Actuators and the 9~(th) Energy Harvesting Workshop Held Successfully

<正>Sept.22~(nd)-25~(th),2014,Suzhou,ChinaThe 11~(th)International Workshop on Piezoelectric Materials and Applications in Actuatorsthe 9~(th)Energy Harvesting Workshop(IWPMAEHW2014)was held successfully at Suzhou Grand Metropark Hotel,China,during Sept.22~(nd)to Sept.25~(th),2014.Prof.Chunsheng Zhao from Nanjing University of Aeronautics and Astronautics(NUAA),Member of the Chinese Academy of Sciences,acted as the chairman of the conference.     

The 17~(th) Asia Pacific Vibration Conference (APVC 2017)

正The 17~(th) Asia Pacific Vibration Conference (APVC 2017) was successfully held in Nanjing, P.R. China, on November 13-15, 2017. Since its very first edition in 1985, APVC, as an international academic symposium,has been one of the longest-running ones dedicated to vibration analysis, control and utilization. Held biennially,APVC serves as an active and stimulating forum for professionals to share the latest innovative findings and     

“16.5.6”绵阳机场强初雷天气过程中尺度分析

利用NCEP格点再分析资料、MICAPS资料、卫星云图资料、雷达资料以及自动站资料对2016年5月6日发生在绵阳机场的强初雷过程进行了分析研究。结果表明:(1)500 hPa高空槽、700 hPa及850 hPa切变线和西南低涡产生的中尺度对流系统是雷雨产生的直接原因。(2)此次过程发生在对流不稳定、高能和高湿的大气环境中。动力、热力、水汽和能量等方面分析表明绵阳机场已具备雷雨发生的有利条件。(3)强回波有相向移动的趋势并且合并后加强。(4)通过中尺度对流云团的发生、发展及演变,同时配合雷达反射率和速度场的演变对雷雨的预报有指示意义。     

模H-Nielsen数(2)

通过研究自映射ｆ在π１（Ｘ，ｘ０）上的作用ｆπ，发现只要适当地选取π１（Ｘ，ｘ０）中子群Ｈ（ｆπ，π１）作为正则复迭空间的子群，得到模Ｈ－Ｎｉｅｌｓｅｎ数等于Ｎｉｅｌｓｅｎ数的结果，从而简化了用模Ｈ－Ｎｉｅｌｓｅｎ数计算Ｎｉｅｌｓｅｎ数的过程。     

Optimization Algorithm of UWB Positioning for Aircraft Assembly Workshop

Due to the complexity of strong metal interference and multiple occlusions in aircraft assembly workshop,the random "drift"phenomenon often happens in the ultra wide band (UWB)based positioning system.To solve this,a fusion positioning optimization algorithm is proposed based on median filtering,hidden Markov model (HMM)a nd Kalman filtering.Firstly,based on the three-dimensional (3D) median filtering,aqueue optimization method with weights is introduced to smooth the measurement data and eliminate the abnormal value.Secondly,taking Singer model as a reference,a single-dimension acceleration distribution model is designed.In order to further consider the spatial motion characteristics of objects in workshop,the distribution is extended from 1D to 3D,and discretized into the state quantity of HMM.Subsequently,the data obtained by the two methods are fused by taking Kalman filter as an iterator,and then the optimized location solution is obtained based on dynamic weights.Finally,an experiment is conducted in an aircraft assembly workshop.Results show that 99.3% of dynamic positioning errors are less than 15 cm after using the proposed algorithm.Even in the situation with large signal-fluctuation,there are 71.6% of positioning data whose errors are reduced.The random "drift"is greatly decreased.     

面向对象建模(UML)的理论分析

本文主要介绍统一建模语言（UML）的产生基础、UML的基本语义；面向对象的机制和过程。     

幂等自映射的Nielsen数（3）

设Ｘ是有限且连通的多面体，ｆ是Ｘ上的幂等自映射，则在在Ｘ上同伦于ｆ的自映射，在基本群π１（Ｘ，ｘ０）子群Ｉｍ上的作用是恒同同构。     

TiO2光催化还原Hg(Ⅱ)

采用溶胶-凝胶法制备TiO2粉体，考察了它当铬离子存在时对汞离子溶液的光催化还原效果。结果表明，当TiO2的用量为2g／L、汞初始浓度为7μg／mL时，光催化还原效率最高。在体系中通入N2保护，还原率明显提高。用无定形TiO2作为光催化剂，还原率不稳定。     

平面斜边界问题的边界元分析

本文对处理斜边界问题的边界元法的方程进行了推导和分析,通过引入局部坐标系,建立局部坐标与总坐标间的变换关系,使边界元法在处理结构斜边界问题中更为简捷方便。通过几个算例及某发动机叶片燕尾形榫头的应力分析,证明结果是令人满意的,尤其在计算边界应力时,边界元法比有限元法更为精确。     

面向生产过程的智能车间数字孪生建模及应用

数字孪生技术具有虚实融合的特性,智能车间数字孪生可以使生产过程透明化,利用实时数据可以有效指导车间生产。为实现基于数字孪生的生产过程可视化管控,提出了面向生产过程的智能车间数字孪生建模及应用。首先,建立了智能车间数字孪生系统体系架构。然后对系统实现的3项关键技术——基于点云拟合的三维几何模型构建方法、面向数据交互的对象链接与嵌入的过程控制统一架构（Object linking and embedding for process control unified architecture,OPC UA）信息建模方法、以及多源异构数据集成及虚实映射数据快速匹配方法进行了详细阐述;最后,对某发动机制造车间进行了数字孪生的实现,验证了所提方法的正确性和有效性。