Study of complex dielectric properties of lunar simulants and comparison with Apollo samples at microwave frequencies

Laboratory characterization of dielectric properties of terrestrial analogues of lunar soil (JSC-1A) and comparison with lunar samples returned from various Apollo missions is made at different as well as normalized bulk density. Here measurements of dielectric constants and losses were made at four microwave frequencies such as 1.7 GHz, 2.5 GHz, 6.6 GHz and 31.6 GHz. Complex permittivity of lunar simulant was measured at temperature ranging from −190 °C to + 200 °C using Wave-Guide cell method. Comparison of permittivity of JSC-1A with Apollo sample also has been done at similar microwave frequencies. The investigations reveal that dielectric constant and loss factor of terrestrial analogues of lunar soil are temperature dependent. As temperature is gradually increased both these parameter (storage factor and loss factor) also gradually increases. These temperatures were chosen because the Moon undergoes at that extremes level of temperature. It is scorching heat at 110 °C during the day and freezing cold at −180 °C during night. The measured value of ε can be useful for designing passive as well as active sensors.     

模拟月壤研制的初步设想

模拟月壤是月球样品的地球化学复制品，作者总结世界上已有的5种模拟月壤JSC-1，MLS．1，MLS-2，MKS-1和FJS-1的研制过程、方法与基本理化性质，认为系列化模拟月壤研制对中国首次月球探测有重要意义，在此基础上，作者提出系列化模拟月壤研制的基本思路．     

模拟月壤铺粉过程DEM数值仿真

空基激光选区熔化（SLM）技术与原位资源利用（ISRU）概念结合,有望解决地外大规模基地建设的工程难题。SLM铺粉过程对成形件性能和质量有重要影响。基于非球形粒子叠加球模型方法,建立模拟月壤颗粒几何模型;基于线性弹簧-阻尼接触作用模型、Hamaker理论及牛顿运动定律,建立颗粒动力学模型;采用三维离散单元方法（DEM）及软球模型,进行不同工况下模拟月壤在铺粉过程中的流变特性研究。结果显示:所提模型和方法能开展指定工况和环境参数的模拟月壤颗粒系统流动性和堆积行为数值仿真研究;月面低重力环境导致粉床表面粗糙度变大、堆积密度和平均配位数变小;通过降低铺粉速度和优化刮刀型面,可以有效改善月基铺粉的粉床质量,获得更密实和均匀的粉床结构。      

Production of high fidelity lunar agglutinate simulant

As space faring nations consider manned and unmanned missions to the Moon, there is a growing need to develop high fidelity lunar regolith simulants that can accurately reproduce the properties and behavior of lunar regolith. Such simulants will be employed to verify the performance of equipment, mechanisms, structures and processes to be used on the lunar surface. One of the significant limitations of current terrestrial-based simulants, such as the popular mare simulant, JSC-1A, is the lack of agglutinates. This paper investigates the production of a lunar mare agglutinate simulant based on JSC-1A. A modified plasma processing technique was used to expose the JSC-1A regolith simulant to high temperatures and transform it to predominantly a glassy phase. Detailed characterization results are presented to confirm that the agglutinate simulant material produced during this investigation reasonably satisfies the primary requirements of an agglutinate simulant such as amorphous/crystalline content, particle size, morphology, vesicular structure, chemistry, and presence of nanophase elemental Fe.     

Investigating the soil removal characteristics of flexible tube coring method for lunar exploration

Compared with other technical solutions, sampling the planetary soil and returning it back to Earth may be the most direct method to seek the evidence of extraterrestrial life. To keep sample’s stratification for further analyzing, a novel sampling method called flexible tube coring has been adopted for China future lunar explorations. Given the uncertain physical properties of lunar regolith, proper drilling parameters should be adjusted immediately in piercing process. Otherwise, only a small amount of core could be sampled and overload drilling faults could occur correspondingly. Due to the fact that the removed soil is inevitably connected with the cored soil, soil removal characteristics may have a great influence on both drilling loads and coring results. To comprehend the soil removal characteristics, a non-contact measurement was proposed and verified to acquire the coring and removal results accurately. Herein, further more experiments in one homogenous lunar regolith simulant were conducted, revealing that there exists a sudden core failure during the sampling process and the final coring results are determined by the penetration per revolution index. Due to the core failure, both drilling loads and soil’s removal states are also affected thereby.     

Depth dependency of neutron density produced by cosmic rays in the lunar subsurface

Depth dependency of neutrons produced by cosmic rays (CRs) in the lunar subsurface was estimated using the three-dimensional Monte Carlo particle and heavy ion transport simulation code, PHITS, incorporating the latest high energy nuclear data, JENDL/HE-2007. The PHITS simulations of equilibrium neutron density profiles in the lunar subsurface were compared with the measurement by Apollo 17 Lunar Neutron Probe Experiment (LNPE). Our calculations reproduced the LNPE data except for the 350–400 mg/cm² region under the improved condition using the CR spectra model based on the latest observations, well-tested nuclear interaction models with systematic cross section data, and JENDL/HE-2007.     

Gas permeability and flow characterization of simulated lunar regolith

Recent discoveries of water ice trapped within lunar topsoil (regolith) have placed a new emphasis on the recovery and utilization of water for future space exploration. Upon heating the lunar ice to sublimation, the resulting water vapor could theoretically transmit through the lunar regolith, to be captured on the surface. As the permeability of lunar regolith is essential to this process, this paper seeks to experimentally determine the permeability and flow characteristics of various gas species through simulated lunar regolith (SLR). Two different types of SLR were compacted and placed into the permeability setup to measure the flow-rate of transmitted gas through the sample. Darcy’s permeability constant was calculated for each sample and gas combination, and flow characteristics were determined from the results. The results show that Darcy’s permeability constant varies with SLR compaction density, and identified no major difference in permeable flow between the several tested gas species. Between the two tested SLR types, JSC-1A was shown to be more permeable than NU-LHT under similar conditions. In addition, a transition zone was identified in the flow when the gas pressure differential across the sample was less than ∼40 kPa.     

月尘/月壤环境效应地面模拟方法研究

月壤/月尘会附着并污染航天器、月球车的表面,如果不及时清除,还会进一步诱发部件过热、机械机构卡死、密封失效、材料磨损等一系列问题.本文综述了关于月尘特性、月尘与航天器系统的互相作用机理、月尘环境模拟方法等方面的研究成果,提出了一种小型月尘环境模拟系统的设计方案.该系统将使关于月尘特性的实验研究成为可能,并可作为登月飞船及月球车材料选择、机械机构可靠性试验、除尘策略试验的平台.      

Exploration life support technology challenges for the Crew Exploration Vehicle and future human missions

As NASA implements the U.S. Space Exploration Policy, life support systems must be provided for an expanding sequence of exploration missions. NASA has implemented effective life support for Apollo, the Space Shuttle, and the International Space Station (ISS) and continues to develop advanced systems. This paper provides an overview of life support requirements, previously implemented systems, and new technologies being developed by the Exploration Life Support Project for the Orion Crew Exploration Vehicle (CEV) and Lunar Outpost and future Mars missions. The two contrasting practical approaches to providing space life support are (1) open loop direct supply of atmosphere, water, and food, and (2) physicochemical regeneration of air and water with direct supply of food. Open loop direct supply of air and water is cost effective for short missions, but recycling oxygen and water saves costly launch mass on longer missions. Because of the short CEV mission durations, the CEV life support system will be open loop as in Apollo and Space Shuttle. New life support technologies for CEV that address identified shortcomings of existing systems are discussed. Because both ISS and Lunar Outpost have a planned 10-year operational life, the Lunar Outpost life support system should be regenerative like that for ISS and it could utilize technologies similar to ISS. The Lunar Outpost life support system, however, should be extensively redesigned to reduce mass, power, and volume, to improve reliability and incorporate lessons learned, and to take advantage of technology advances over the last 20 years. The Lunar Outpost design could also take advantage of partial gravity and lunar resources.     

Reports to COSPAR from the International Lunar Exploration Working Group (ILEWG)

In accordance with its charter, the International Lunar Exploration Working Group (ILEWG) reports to COSPAR, and a summary was given at the Beijing COSPAR 2006 Assembly on ILEWG activities conducted since the previous COSPAR 2004 assembly held in Paris. This included reports from the 6th and 7th ILEWG International Conference on Exploration and Utilization of the Moon, held respectively in Udaipur, India on 22–26 November 2004 (ICEUM6) and in Toronto, Canada on 18–23 September 2005 (ICEUM7). We give in this issue of Advances in Space Research the “lunar declarations” from these ICEUM conferences, as well as for the ICEUM8 conference held in Beijing immediately after the 2006 COSPAR Assembly. One year after the COSPAR Beijing assembly, the 9th ILEWG International Conference on Exploration and Utilization of the Moon (ICEUM9), was held in Sorrento, Italy on 18–23 September 2007. We report also in this issue the “Sorrento Lunar Declaration” in advance of the ILEWG formal report to be given at the COSPAR Assembly to be held in Montreal, Canada in July 2008.     

Plasma electron temperature variability in lunar surface potential and in electric field under average solar wind conditions

The Moon is immersed in plasma environment. The most interesting challenge of the lunar plasma– field environment is that it is alternatively dominated by the extended but variable outer atmosphere of the Earth – the magnetosphere – and by the extended but highly variable solar atmosphere – the solar wind. Understanding the plasma environment and its interaction with the lunar surface will be beneficial to both manned and robotic surface exploration activities and to scientific investigations. Presented is a preliminary map of variations of lunar surface electric potential over the day side and night side using probe equations and a discussion on dust dynamics in this E-field structure using the data from Electron Reflectometer in Lunar Prospector spacecraft during 1998–1999. On the day side, potential is around 5 V and on the night side it reaches up to −82 V. On the night side region, only highly energetic electrons can overcome this large negative potential. The variation at electron temperature (T_e) strongly reflects in the surface potential. The potential reaches to a value of −82 V for T_e = 58 eV. Surface charging causes the electrostatic transport of charged dust grains. Dust grain size of 0.1 μm shows a levitation height of 4.92 m on lunar day side, 748 m on terminator region and 3.7 km on the night side. The radius of maximum sized grain to be lofted, R_max, peaks at the terminator region (R_max = 0.83 μm). At the transition region dust levitation is almost absent. This region is most suited for exploration activities as the region is free from hazards caused by lunar dust.     

Some qualitative manifestations of the physical libration of the Moon by observing stars from the lunar surface

Targets and problems of the future Japanese project ILOM (In situ Lunar Orientation Measurement), which is planned to be realized as one kind of observations of lunar rotation at the second stage of SELENE-2 mission, are briefly described in the article. Inverse problem of lunar physical libration is formulated and solved. Accuracy of libration angles depending on accuracy of measuring selenographic coordinates is estimated. It is shown that selenographic coordinates of polar stars are insensitive to longitudinal librations τ(t). Comparing coordinates calculated for two models of a rigid and deformable Moon is carried out and components sensitive to Love number k₂ and to anelastic time delay are revealed.     

考虑相互碰撞影响的月壤颗粒运动轨迹计算方法研究

针对登月着陆器下降过程扬起月壤颗粒的运动轨迹及空间分布问题, 提出了考虑月壤颗粒发生完全弹性碰撞和非完全弹性碰撞两种情况的月壤颗粒运动轨迹计算方法. 根据质量守恒和能量守恒定律确定月壤颗粒相互碰撞后的速度, 通过羽流场与月壤颗粒的流固耦合相互迭代计算方法, 获得被扬起的月壤颗粒在羽流场和相互碰撞共同作用下随时间的运动轨迹和空间分布. 基于美国Apollo 11登月过程实测数据, 采用数值模拟对该方法进行验证. 结果表明, 考虑月壤颗粒相互碰撞的影响后, 其运动规律出现较明显的扩散趋势. 进一步考虑月壤颗粒相互碰撞引起能量损失的影响后, 月壤颗粒的扩散趋势有所减弱, 并且扬起的高度随着恢复系数的减小而降低.      

Moon surface radiation environment analysis for February 1956 solar event conditions

The radiation environment on the surface of the Moon presents a new source of particles resulting from the interaction of incoming solar protons and galactic cosmic rays with the lunar regolith. Here we present a study of the fluence profile of primary and secondary particles on the top 1 m layer of lunar regolith for the spectrum of one of the hardest spectrum solar event, that of February 1956. Different regolith compositions and their influence in proton and neutron production and backscattering is considered, as well as the nature of the backscattered radiation. Simple geometry Monte Carlo simulations have been used also for calculating regolith shielding properties, and it is shown that a layer of at least 50 cm regolith is needed for significantly reducing the dose levels received by astronauts in a hypothetical lunar habitat.     

Simulation study for the determination of the lunar gravity field from PRARE-L tracking onboard the German LEO mission

A simulation study has been performed at GFZ Potsdam, which shows the anticipated improvement of the lunar gravity field model with respect to current (LP150Q model) or near-future (SELENE) knowledge in the framework of the planned German Lunar Explorations Orbiter (LEO) mission, based on PRARE-L (Precise Range And Range-rate Equipment – Lunar version) Satellite-to-Satellite (SST) and Satellite-Earth-Satellite (SEST) tracking observations. It is shown that the global mean error of the lunar gravity field can be reduced to less than 0.1 mGal at a spatial resolution of 50 km. In the spectral domain, this means a factor of 10 (long wavelengths) and some 100 (mid to short wavelengths) improvement as compared to predictions for SELENE or a factor of 1000 with respect to LP150Q. Furthermore, a higher spatial resolution of up to 28 km seems feasible and would correspond to a factor of 2–3 improvement of SELENE results. Moreover, PRARE-L is expected to derive the low-degree coefficients of the lunar gravity field with unprecedented accuracy. Considering long mission duration (at least 1 year is planned) this would allow for the first time a precise direct determination of the low-degree tidal Love numbers of the Moon and, in combination with high precision SEST, would provide an experimental basis to study relativistic effects such as the periselenium advance in the Earth–Moon system.     

Observation of the lunar topography by the laser altimeter LALT on board Japanese lunar explorer SELENE

The SELENE Laser Altimeter (LALT) is designed to map the Moon’s topography and will be launched in summer 2007. LALT incorporates Q-switched Cr doped Nd:YAG laser (1064 nm) with an output energy of 100 mJ and 1 Hz repetition frequency for about one year mission period. The laser pulse travels to the Moon’s surface and reflections from the surface are detected by a silicon avalanche photo-diode. The ranging distance is 50–150 km with about 5 m accuracy. Several corrections for accurate ranging data are investigated. The flight hardware has been qualified and passed all the integration tests. A principal goal of the LALT instrument is to obtain a much more detailed lunar topographic map which is superior in global coverage, measurement accuracy and number of data points to previous observations and models. The overall science objectives of LALT are (1) determination of lunar global figure, (2) internal structure and surface processes, (3) exploration of the lunar pole regions, and (4) reduction of lunar occultation data.     

月尘静电迁移研究进展

月尘的静电悬浮和迁移是Apollo时期留下的最有争议的问题之一. 其既是研 究月球表面物质演化历史的重要线索, 也是探月工程必须考虑的重要因素. 月尘在月表环境下易因电子附着、光电效应、二次电子发射等过程带电, 并 在月球全球性静电场作用下发生迁移运动. 但目前对月尘静电迁移过程的认 识还不全面, 其主要原因在于对月尘静电特性的了解不够准确, 对静电迁移 过程的地面模拟不够充分以及对月球尘埃环境的探测较为缺乏. 未来需进一 步开展模拟月尘的研制, 月尘静电特性的分析, 静电迁移过程模拟以及尘埃 环境的探测等工作.      

New results and questions of lunar exploration from SELENE,Chang’E-1, Chandrayaan-1 and LRO/LCROSS

The moon has longstanding questions such as lunar environments, origin, formation and evolution, magnetization of crustal rocks, internal structure and possible life. The recent lunar missions, e.g., SELenological and ENgineering Explorer “KAGUYA” (SELENE), Chang’E-1, Chandrayaan-1, and Lunar Reconnaissance Orbiter/Lunar CRater Observation and Sensing Satellite (LRO/LCROSS), have provided new opportunities to explore and understand these issues. In this paper, we reviewed and presented the results and findings in the fields of lunar gravity, magnetic field, atmosphere, surface geomorphology and compositional variations, volcano, craters, internal structure, water and life science from new lunar exploration missions. In addition, the new objectives and scientific questions on lunar explorations in near future are presented and discussed.     

Mechanical behavior of the metal parts welded with extraterrestrial regolith simulant by the solar concentrator in ISRU & ISRF application

The use of in-situ resources plays an important role on future extraterrestrial human activities for the facility repair and habitat construction, especially in sustainable space exploration of Moon and Mars. A method of the metal welded with extraterrestrial regolith simulant using solar processing under ambient conditions is presented. Metal parts are made of Q235B ferroalloy and TA2 titanium alloy into standard tensile members according to the ASTM code. They are disconnected from the middle in advance, and then welded together with lunar and Martian regolith simulant under ambient conditions, respectively. The entire welding process and precautions are detailed. Additionally, the mechanical behavior of weldments is characterized regarding their tensile strength. Furthermore, the fusion zone of weldments is studied by Scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD) measurements. The results show that it is possible to weld metal parts together with extraterrestrial regolith simulant by the solar concentrator. The average ultimate tensile strength of ferroalloy specimens welded with lunar and Martian regolith simulant is 2.94 MPa and 1.66 MPa; The average ultimate tensile strength of titanium alloy specimens welded with lunar and Martian regolith simulant is 4.95 MPa and 2.59 MPa. Moreover, the failure mode of all weldments was brittle failure. The welding joints strength derives from the phases that the regolith as the solder fusing into ferroalloys in a homogeneous way and titanium alloys in an inhomogeneous way. The presented method may provide a new thought for astronaut assistance associating with repairing and fabricating in subsequent Moon and Mars missions.     

Scientific Progress in China's Lunar Exploration Program

Chang'E-1, the first lunar mission in China, was successfully launched on October 24,2007, which opened the prelude of China's Lunar Exploration Program. Later on, the Chang'E-2 and Chang'E-3 satellites were successfully launched in 2010 and 2013, respectively. In order to achieve the science objectives, various payloads boarded the spacecraft. The scientific data from these instruments were received by Beijing and Kunming ground stations simultaneously. Up to now, about 5.628 Terabytes of raw data were received totally. A series of research results has been achieved. This paper presents a brief introduction to the main scientific results and latest progress from Chang'E-3 mission.