Moving target localization in distributed MIMO radar with transmitter and receiver location uncertainties

In this paper, the problem of moving target localization from Bistatic Range(BR) and Bistatic Range Rate(BRR) measurements in a Multiple-Input Multiple-Output(MIMO) radar system having widely separated antennas is investigated. We consider a practically motivated scenario,where the accurate knowledge of transmitter and receiver locations is not known and only the nominal values are available for processing. With the transmitter and receiver location uncertainties,which are usually neglected in MIMO radar systems by prior studies, taken into account in the measurement model, we develop a novel algebraic solution to reduce the estimation error for moving target localization. The proposed algorithm is based on the pseudolinear set of equations and two-step weighted least squares estimation. The Cramer-Rao Lower Bound(CRLB) is derived in the presence of transmitter and receiver location uncertainties. Theoretical accuracy analysis demonstrates that the proposed solution attains the CRLB, and numerical examples show that the proposed solution achieves significant performance improvement over the existing algorithms.     

Bistatic Radar Cross Sections of Horizontally Oriented Chaff

Bistatic radar cross sections are determined for scattering from a cloud of randomly positioned resonant dipoles (chaff). Dipoles are assumed to be horizontally oriented with axes randomly oriented in the horizontal plane. The cloud is arbitrarily located relative to an illuminating source having an arbitrary (elliptical) polarization. Cloud cross section is found for an arbitrarily located receiver that views the cloud with an antenna of arbitrary polarization. Cross section applicable to the receiver's orthogonal polarization is also found.     

Bistatic Radar Cross Sections of Chaff

Bistatic cross sections applicable to scattering from a cloud of randomly positioned and randomly oriented resonant dipoles, or chaff, are found. The chaff cloud can have an arbitrary location relative to an illuminating radar and the radar antenna can have an arbitrarily specified polarization. The receiver can be located arbitrarily in relation to the radar and chaff cloud and can also have arbitrary polarization (different from the transmitter antenna). Average cross sections are found for a preferred receiver polarization and the corresponding orthogonal polarization. Results are reduced to simple, easily applied expressions, and several examples are developed to illustrate the ease with which the general results can be applied in practice.     

雷达灵敏度测量中的视频信号积累方法

首先分析了视频信号积累在雷达中的作用和工作原理,然后详细阐述了数字化实现信号积累的方法,最后介绍了信号积累在雷达接收机灵敏度测量中的应用,较好的解决了接收机灵敏度测量中的不稳定问题.     

表面不连续特征双站散射特性的试验研究

 采用一种新颖的不连续特征双站雷达散射截面（RCS）测试方法,通过系列化测试,研究了单直缝隙板、单直台阶板的双站散射特性,提出了不连续特征双站散射具有相似性、对称性和平移性的特点,分析了不同不连续特征具有的异同点。试验结果表明：对不连续特征,不同双站下的RCS散射曲线均具有和对应入射频率下的单站散射曲线分布形式相似的特点,同时不同的不连续特征对幅值的影响不同;如果测试方式和试验件对称,则双站和单站散射曲线均具有关于峰值所在方位角对称的特点,单直缝隙板由于试验件本身的对称性表现为较好的曲线对称性,而单直台阶板则表现为稍弱的对称性;散射曲线随双站角的增大,具有明显的平移特性,平移的幅度为双站角的1/2,平移方向为从发射天线指向接收天线,平移后的曲线峰值处于发射天线和接收天线夹角平分线上。     

Radar Handbook, 3rd Edition (M.I. Skolnik, Ed; 2008) [Book Review]

Thirty eight radar experts contribute to this edition, which includes six completely new chapters on the following topics: ground penetrating radar; remote sensing with radar on satellites; multifunctional radar systems for fighter aircraft (MFAR); digital signal processing for radar; civil marine radar; and propagation. Each chapter contains references, ranging from 10 to 197, with a median of 71. The index runs 18 pages printed in double columns, but is not necessarily complete. Some topics, such as MIMO radar and long range radars to track satellites and ballistic missiles, will have to wait for a 4th edition. This text is the most authoritative, broadest, and deepest single volume on radar. The emphasis is on real world performance and real hardware that has been tested and works successfully in the real world, and the physics relevant to radar systems, as well as radar system engineering cost tradeoffs.     

Ultra-high performance, low-power, data parallel radar implementations

Radar involves similar operations applied to large amounts of data. It is thus well suited to data parallel (SEMD) hardware. In the past, large data-parallel machines have been applied to radar with limited success. This has been due to such reasons as programming issues, cost, and the hardware being too big for most embedded applications. Most SBVED machines went away a decade ago. There is now a new generation of SIMD COTS technology with powerful processing elements (PEs) and floating-point hardware. WorldScape is applying these chips to radar processing, and has demonstrated significantly more performance with much lower power dissipation (GFLOPS/Watt). These implementations provide attractive alternatives to traditional FPGA and DSP solutions. Lockheed-Martin has provided benchmark validation testing and support for these implementations. The current implementation is based on a 64 PE, 25 GFLOP CS-301 chip supplied by ClearSpeed Technology PLC. WorldScape has demonstrated FFT, Pulse Compression, a form of QR factorization, and other applications on this generation of hardware using a mix of C-level programming and optimized assembly. The next generation chip is compatible, but also has several improvements that will significantly enhance I/O performance as well as raw GFLOP throughput. An updated demonstration and discussion of a scalable processing platform for embedded radar processing which significantly improves I/O performance and provides a roadmap to government-qualified hardware for technology insertion. Architectures, data parallel coding approaches, additional functionality of the scalable processing platform, and relevance to embedded defense radar applications will be discussed.     

Modeling and parameter optimization of agile beam radar tracking

In the work presented here, we address parameter optimization for agile beam radar tracking to minimize the radar resources that are required to maintain a target under track. The parameters to be optimized include the track-revisit interval as well as the sequence of pairs of target signal strengths and detection thresholds associated with successive illumination attempts in each track-revisit. The effects of false alarms and clutter interference are taken into account in the modeling of target detection and in the characterization of tracking performance. Based on the detection model and tracker characterization, the parameter optimization problem is formulated. Typical examples of the optimization problem are numerically solved. The optimal solution gives an off-line scheduling of the parameter set. It also provides insight into the selection of a near-optimal parameter set that is appropriate for real-time implementation.     

CTD MTI Radar Filter with Charge-Transfer Inefficiency Compensation

The design and implementation of a second-order nonrecursive moving target indication (MTI) radar filter using commercially available charge-transfer devices as delay lines are described. A simple technique is included to compensate for the device charge-transfer in-efficiency and its sensitivity is analyzed. Experimental laboratory tests and results in an operating radar system are reported showing the good performance of the realized MTI radar filter.     

Intrepid digital microwave. A new approach to bistatic radar

Southwest Microwave, Inc. (SMI) introduced the world's first commercially viable bistatic microwave intrusion detection sensor in 1971. Bistatic microwave has become the paradigm for high security perimeters, and SMI products have become industry standards. With the introduction of the Intrepid Digital Microwave, SMI brings the latest in Digital Signal Processing (DSP) and power and data networking to this proven sensor technology     

干扰机应对自适应捷变频雷达的一种干扰方法

雷达干扰机与雷达抗干扰相互促进发展,现在自适应捷变频雷达具有很强的抗窄带瞄准式干扰和宽带阻塞式干扰的能力。文章中提出了现有干扰机对自适应捷变频雷达实施干扰的一种新方法及实施方案——频谱拖引。     

MIT Lincoln Laboratory Journal: fifty years of radar

This review assumes that many non-US readers may not be well-informed about the steps and work in radar development in the US after WW II to the present. Many know MIT by name and recall the famous Radiation Laboratory Series. But the more recent technical history has been less in the "public domain." In an attempt to correct this, one of the key institutions in the field, the MIT Lincoln Laboratory two years ago produced a special issue of their regular publication. Although the document currently at hand is not a book in the strict sense, the size, shape, and editorial comprehensiveness of the MIT Lincoln Laboratory Journal's Fifty-Year Anniversary Issue (12, 2, 2000) justifies calling this article being treated as a book review.     

基于3DT的空时自适应单脉冲参数估计算法

空时自适应处理(STAP)是机载预警雷达抑制杂波和干扰的一项关键技术,而多普勒三通道联合自适应处理(3DT)是适合工程实现的降维(RD)STAP方法。STAP目标检测后还需进一步估计目标的角度参数,因此将自适应单脉冲(AM)技术引入3DT,提出了一种高精度联合估计目标速度与方位空间角的空时自适应单脉冲算法。理论分析与仿真实验结果表明,当目标多普勒频率偏离检测多普勒单元中心频率时,该算法能同时减少目标多普勒跨越损失和空时导引矢量失配损失,进而提高输出信杂噪比(SCNR),改善目标测角精度。     

Sensor Netting via the Discrete Time Extended Kalman Filter

An implementation is presented of the discrete time extended Kalman filter which the authors have found useful for sensor netting in a variety of tactical radar and ballistic missile defense (BMD) applications. A Potter square root version of the extended Kalman filter is used where vector measurements are processed serially. Both the state and covariance equations are initialized by processing past measurements. The initialization technique and the filter are used in two tactical radar tracking examples.     

Radar Waveform Selection-A Simplified Approach

Radar measurement and resolution performance, as well as target detection in clutter, depend largely on the transmitted waveform. This explains the sizable effort that has gone into studies of radar waveforms, including attempts at the synthesis of optimum waveforms. This paper shows that, despite the unlimited variety of radar signals, waveform selection is a straightforward process. There are only four classes of waveforms, each with distinct resolution properties. When the target environment is analyzed for a particular application, it is rather evident which of these classes will fit the situation best. Choice of the specific waveform within the selected class then is merely a matter of practical implementation. Although the facts used in developing the unified theory of this paper are not new, it is demonstrated that these facts can be combined into an extremely simple theory of waveform design. Much of today's work is guided by past approaches to a particular problem, and when a design is completed there may be a question as to how close to the optimum it is. The theory presented here permits a systematic approach to waveform selection, with the important benefit that the designer knows exactly where and how much he may have deviated from the best design, and why this was done.     

Heading and Speed Errors for x, y Tracking Filters

Heading and speed errors are analytically determined for noneumavering targets at the output of an x, y tracking filter which processes range and bearing measurements from a radar sensor in a track-while-scan (TWS) operation. These errors are shown to depend upon target range and speed, the angle between the radius and velocity vectors, sensor accuracies, and tracking filter parameters. eters. Depending upon the tracking filter implementation, these errors may also be a function of target bearing.     

An approach to radiated testing of installed airborne Doppler radarwith weather/windshear detection capability

Numerous documents were reviewed to verify radar parameters needed to analyze and present the tester concept described herein. The weather and windshear models defined use the identical criteria established for the Doppler radar in terms of F-factor. The basic concept of the tester is to transmit coherent simulated radar returns in response to the airborne radar's transmission while mounted on a tripod in the far field of the radar when parked on the ramp. The varying amplitude of the received radar pulses are analyzed and put into memory as the tester antenna is illuminated by the scanning main beam and side lobes of the radar's antenna patterns. The tester controls the power of its outputted simulated radar returns in inverse relation to the power of the received radar pulses. These simulated radar returns, outputted into the main beam and/or side lobes of the scanning radar antenna, are interpreted by the radar system as received in the main lobe. The tester transmissions, incorporating microburst, storm and gust front models, previously defined, can thereby test the aircraft radar system performance in various hazard environments. The tester is designed to: verify operational performance of the radar; demonstrate installed radar performance; verify crew reports and minimize radar or LRU's removal for maintenance; test before and after a repair; and verify radome effects on radar performance     

The Aircraft Warning Service, Hawaii and the Signal Company,Aircraft Warning, Hawaii

The development of radar by the US Army Signal Corps is traced as a prelude to presenting an account of the first use of radar in a US military action. This was the use of a newly developed Signal Corps radar set to detect the wave of Japanese aircraft as they approached the island of Oahu on the morning of Sunday, December 7, 1941     

Ship target recognition using low resolution radar and neuralnetworks

The classification of ship targets using low resolution down-range radar profiles together with preprocessing and neural networks is investigated. An implementation of the Fourier-modified discrete Mellin transform is used as a means for extracting features which are insensitive to the aspect angle of the radar. Kohonen's self-organizing map with learning vector quantization (LVQ) is used for the classification of these feature vectors. The use of a feedforward network trained with the backpropagation algorithm is also investigated. The classification system is applied to both simulated and real data sets. Classification accuracies of up to 90% are reported for the real data, provided target aspect angle information is available to within an error not exceeding 30 deg     

调频连续波毫米波雷达信号处理软件分析

雷达在其发展前期,连续波雷达由于收发隔离等问题不易解决,应用受限制。但是随着技术的发展,这些问题得到改善,连续波雷达越来越受到人们的关注。文章针对现有调频连续波雷达平台,通过分析研究雷达平台,介绍信号处理软件的设计思路与系统结构,设计与开发了信号处理软件。在此基础上,对雷达功能设计实现进行分析,对软件各模式功能进行实验测试,验证了其功能实现及测量精度,并进一步研究调频连续波雷达毫米波雷达用于导弹近程制导的可行性,介绍了调频连续波毫米波雷达的性能,指出其用于末端制导的缺陷并给出改善方法。