Removing autocorrelation sidelobes by overlaying orthogonal coding on any train of identical pulses

A coherent train of identical linear FM (LFM) pulses is used extensively in radar because of its good range and Doppler resolution. Its relatively high autocorrelation function (ACF) sidelobes are sometimes reduced through spectrum shaping (e.g., nonlinear FM, or intrapulse weighting on receive). We show how to completely remove most of the ACF sidelobes about the mainlobe peak, without any increase to the mainlobe width, by diversifying the pulses through overlaying them with orthonormal coding. A helpful byproduct of this design is reduced ACF recurrent lobes. The overlaid signal also results in reduced Doppler tolerance, which can be considered as a drawback for some applications. The method is applied to several trains of identical pulses (LFM and others) using several orthonormal codes. The effect on the three important properties of the radar signal: ACF, ambiguity function (AY), and frequency spectrum is presented. The effect on Doppler tolerance is studied, and implementation issues are discussed. The new design is also compared with complementary and sub-complementary pulse trains and is shown to be superior in many aspects.     

Nullifying ACF grating lobes in stepped-frequency train of LFM pulses

An effective way to increase the bandwidth of a coherent pulse-train is to add a frequency step /spl Delta/f between consecutive pulses. A large /spl Delta/f implies a large total bandwidth, hence improved range resolution. However, when the product of the frequency step times the pulse-duration t/sub p/, is larger than one (t/sub p/ /spl Delta/f > 1), the autocorrelation function (ACF) of the stepped-frequency pulse-train suffers from ambiguous peaks, known as "grating lobes." It is well known that replacing the fixed-frequency pulses with linear FM (LFM) pulses of bandwidth B can reduce those grating lobes. We present a simple analytic expression for the ambiguity function (AF) and ACF of such a signal and derive from it very simple relationships between /spl Delta/f, B, and t/sub p/ that will place s exactly where the grating lobes are located, and thus remove them completely.     

Properties of Dolph-Chebyshev Weighting Functions

Dolph-Chebyshev amplitude weighting is used with FFT signal processors and array antennas when a low sidelobe response is required. This particular weighting minimizes the width of the mainlobe response while forcing all of the sidelobes to a specified sidelobe level. As the specified sidelobe level is reduced, the mainlobe width increases, as does the loss in signal-to-noise ratio. This correspondence describes how the Dolph-Chebyshev weights may be easily calculated, and gives design data showing how signal-to-noise loss and mainlobe width vary with the specified sidelobe level.     

Digital and Analog Subcomplementary Sequences for Pulse Compression

Golay's complementary pairing has been a method to increase the utility of binary sequences, because of the temporal sidelobe suppression in the autocorrelation vector summation. Complementary sets of Tseng and Liu and of Hollis exhibit the same effect when several autocorrelations are combined. These complementary pairs and sets of sequences can be extended into long complementary chains by a simple transformation. This transformation is extended here to all pulse compression waveforms. By this method, even though analog complementary sequences cannot be formed, a new class of waveforms, called subcomplementary waveforms, can be formed. Following these rules, repetition of waveforms such as linear frequency modulation (LFM) or linear stepped frequency modulation (LSFM) in a prescribed manner is possible without creating autocorrelation grating lobes or repetitive sidelobes. This method is equally applicable to all analog or digital pulse compression waveforms.     

Clutter Performance of Coherent Pulse Trains for Targets with Range Acceleration

The clutter performance of coherent pulse trains is examined when the duration of the pulse train is increased to values for which range acceleration effects must be taken into account. The problem of target detection against a clutter background with differential Doppler is studied in terms of the range acceleration effects on the conventional Doppler response. Specifically considered are the consequences on the sidelobe level and width of the main Doppler lobe. The analysis shows that the sidelobe level remains essentially unchanged when the range acceleration mismatch becomes significant. However, the main Doppler response broadens in proportion to the magnitude of the acceleration mismatch. Thus, an increase of the signal duration for better Doppler resolution is useful only until acceleration effects spread the Doppler spectrum of the clutter and eliminate the differential Doppler between targets and clutter.     

Sparse frequency transmit-and-receive waveform design

A computationally efficient algorithm derives complex digital transmit and receive ultra-wideband radar and communication waveforms with excellent arbitrary frequency band suppression and range sidelobe minimization. The transmit waveform minimizes a scalar function penalizing weighted spectral energy in arbitrary frequency bands. Near constant power results from another penalty function for deviations from constant power, or constant power is enforced by a phase-only formulation. Next, a least squares solution for the receive waveform minimizes a weighted sum of suppressed band spectral energy and range sidelobes (for pulse and continuous wave operation), with a mainlobe response constraint. Both waveforms are calculated by iterative algorithms whose updates require only linear order in memory and computation, permitting quick calculation of long pulses with thousands of samples.     

A New Class of Polyphase Pulse Compression Codes and Techniques

A new class of symmetric radar pulse compression polyphase codes is introduced which is compatible with digital signal processing. These codes share many of the useful properties of the Frank polyphase code. In contrast with the Frank code, the new codes are not subject to mainlobe to sidelobe ratio degradation caused by bandlimiting prior to sampling and digital pulse compression. It is shown that bandlimiting the new codes prior to pulse compression acts as a waveform amplitude weighting which has the effect of increasing the mainlobe to sidelobe ratios.     

Nonlinear apodization for sidelobe control in SAR imagery

Synthetic aperture radar (SAR) imagery often requires sidelobe control, or apodization, via weighting of the frequency domain aperture. This is of particular importance when imaging scenes containing objects such as ships or buildings having very large radar cross sections. Sidelobe improvement using spectral weighting is invariably at the expense of mainlobe resolution presented here is a class of nonlinear operators which significantly reduce sidelobe levels without degrading mainlobe resolution implementation is via sequential nonlinear operations applied to complex-valued (undetected) SAR imagery. SAR imaging is used to motivate the concepts developed in this work. However, these nonlinear apodization techniques have potentially broad and far-ranging applications in antenna design, sonar, digital filtering etc., i.e., whenever data can be represented as the Fourier transform of a finite-aperture signal     

Clutter Suppression by Complex Weighting of Coherent Pulse Trains

Uniform coherent pulse trains offer a practical solution to the problem of designing a radar signal possessing both high range and range-rate resolution. The Doppler sensitivity provides some rejection of off-Doppler (clutter) returns in the matched filter receiver. This paper considers the use of a processor in which members of the received pulse train are selectively weighted in amplitude and phase to improve clutter suppression. The techniques described are particularly suitable for rejecting interference entering the processor through ambiguous responses (range sidelobes) of the signal. The complex weights which are derived are optimum in the sense that they produce the maximum clutter suppression for a given detection efficiency. In determining these weights, it is assumed that the distribution of clutter in range and range rate relative to targets of interest is known. Thus, clutter suppression is achieved by reducing the sidelobe levels in specified regions of the receiver response. These techniques are directly applicable to array antennas; the analogous antenna problem would be to reduce sidelobe levels in a particular sector while preserving gain. Complex weighting is most successful when the clutter is limited in both range and velocity.     

Advances in non-linear apodization

Selected new methods and applications of non-linear apodization for irregularly-shaped and parse coherent apertures and arrays are presented. The benefits include unproved impulse response performance, i.e., reduced peak sidelobes and integrated sidelobe power, along with improved mainlobe resolution, compared to classic windowing techniques. Nonlinear apodization (NLA) techniques can also serve as powerful engines for effective superresolution and bandwidth extrapolation of coherent data for filling sparse apertures. The sparse aperture filling property of superresolution algorithms for radar data forms the basis for a new concept which is introduced here: synthetic multiple aperture radar technology (SMART). Increased swath and/or reduced antenna size are some of the benefits postulated for SMART applied to synthetic aperture radar (SAR) systems. The benefits of these new methods and applications for nonlinear apodization are then demonstrated for two specific applications: 1) sidelobe control for Y-type synthetic aperture radiometers, such as the European Soil Moisture and Ocean Salinity (SMOS) system (Kerr et al.) and JPL's proposed GeoSTAR (Lambrigsten) concept; and, 2) filling of sparse synthetic aperture radar data by exploiting the bandwidth extrapolation properties of nonlinear apodization based superresolution techniques. The methods that have been developed and demonstrated herein have potential application to a wide range of passive and active microwave remote sensing and radar systems.     

A chirp scaling approach for processing squint mode SAR data

Image formation from squint mode synthetic aperture radar (SAR) is limited by image degradations caused by neglecting the range-variant filtering required by secondary range compression (SRC). Introduced here is a nonlinear FM chirp scaling, an extension of the chirp scaling algorithm, as an efficient and accurate approach to range variant SRC. Two methods of implementing the approach are described. The nonlinear FM filtering method is more accurate but adds a filtering step to the chirp scaling algorithm, although the extra computation is less than that of a time domain residual compression filter. The nonlinear FM pulse method consists of changing the phase modulation of the transmitted pulse, thus avoiding an increase in computation. Simulations show both methods significantly improve resolution width and sidelobe level, compared with existing SAR processors for squint angles above 10 deg for L-band and 20 deg for C-band     

Performance analysis of conformal conical arrays for airborne vehicles

Conformal array apertures have great potential for providing high performance, low weight systems with little or no impact to the aerodynamic design of the air vehicle. A performance analysis of conformal conical arrays for a national airborne radar application is presented. The conical array geometry is chosen for its similarity to an aircraft or missile nosecone. Performance capabilities are analyzed for a number of antenna performance parameters including scan volume, sidelobe levels, grating lobes, beamwidth, directivity, element count, and cross-polarization     

Adaptive resolution of mainlobe and sidelobe detections using model order determination

This work presents the development and performance evaluation of a methodology for distinguishing between mainlobe and sidelobe detections that arise in adaptive radar systems operating in adverse environments. Various adaptive detection test statistics such as the adaptive matched filter (AMF), the generalized likelihood ratio test (GLRT), and adaptive coherence estimate (ACE), and combinations of these, have been previously analyzed with respect to their sidelobe rejection capabilities. In contrast to these methods which are based on detecting a single target with known direction and Doppler, the present method uses model order determination techniques applied to the AMF or GLRT data observed over the range of unknown angle and Doppler parameters. The determination of model order, i.e., the number of signals present in the data, is made by using least-squares model fit error residuals and applying the Akaike Information Criterion (AIC). Comprehensive computer simulation results are presented which demonstrate substantial improvement in sidelobe rejection performance and detections of multiple sources compared with previous methods.     

两种自适应方向图峰值副瓣控制方法比较

自适应阵列（或称自适应波束形成）目前已广泛应用到雷达、声纳和通信领域中用来抑制各种干扰（有意的干扰，杂波干扰和多用户干扰等）。在雷达应用中，为了减轻脉冲欺骗式干扰或旁瓣目标并利用单脉冲雷达来准确测量目标波达方向．要求自适应方向图具有低副瓣和稳定的主瓣形状。在实际应用中，各种失配误差将降低自适应阵列的性能．这些误差包括由于目标的波达方向不精确引起的信号指向误差，由通道失配和位置扰动引起的阵列校准误差和由小样本教引起的协方差矩阵估计误差。在此情况下，自适应波束形成的性能大大下降（干扰抑制性能变差。主瓣失真和高的副瓣）。已提出了一种基于二次约束的集成峰值副瓣控制（integrated peak sidelobe control，简称IPSC）方法。该方法可以精确地控制峰值副瓣电平并产生具有稳定的主瓣形状的自适应方向图。研究IPSC中目标信号的影响和信号消除方案以进一步提高IPSC的性能。并将IPSC方法和最新提出的基于二阶锥规划（second-order cone programming，简称SOCP）的分布式峰值副瓣控制（distfibuted peak sidelobe control，简称为DPSC）新方法在性能上进行了比较。仿真结果表明。在干扰抑制性能和方向图控制质量方面IPSC比DPSC性能优越。此外IPSC比DPSC计算高效。     

Generalized Response of a Linear FM Pulse Compression Matched Filter

A pulse compression matched filter is analyzed so that the response may be computed when the pulse width, FM rate, and center frequency simultaneously differ from design conditions. Unilateral and bilateral time domain amplitude weighting for sidelobe reduction is included. A general cross-ambiguity function is defined to include these effects and some basic computed results are presented for the peak envelope response with various degrees of Hamming weighting. Computer evaluation of this cross-ambiguity function allows one to choose a combination of mismatches for signal design trade-off between resolution and detection performance. Since no restrictions are placed upon the mismatch parameters, this analysis may also be used to evaluate the filter discrimination against various interfering signals.     

Performance of phased-array antennas with mechanical errors

The performance of planar phase-array antennas with mechanical errors is investigated. Errors in array element positions as a result of structural distortions are considered as deterministic and predictable. Detailed calculations for two assumed modes of distortion reveal that their effects on antenna performance are the loss of peak response in the scan direction and the broadening of the mainlobe, while the far-out sidelobe structure remains relatively intact. For large antennas, performance improvement can be expected by suitable phase compensation. Performance of antennas with random errors in their element positions must be treated statistically. Expressions of average directivity and sidelobe level corresponding to arbitrary error magnitudes in element position, amplitude and phase of excitation as well as finite rate of failure of element modules were derived and verified by direct numerical calculations from the antenna directivity patterns. For a planar phased-array antenna typical for space-based radars, the standard deviation of element position errors must not exceed 1% of the operating wavelength in order to maintain a -10 dBi sidelobe level     

大多普勒容限巴克码脉压

 本文介绍用补偿式非相干型旁瓣抑制滤波器(SSF)实现13位巴克码脉冲压缩旁瓣抑制的理论计算及实验结果。补偿式非相干型SSF采用最小二乘近似逆滤波方法设计,若子脉冲宽度为0.7μs,峰值旁瓣电平不超过-30dB,这种SSF的多普勒容限能达到-40kHz～+40kHz。理论计算及实验结果都表明,所设计的补偿式非相干型SSF的多普勒容限比具有同样长度冲激响应序列的R-G-ISSF有显著改善。     

Optimal Resolution of Rectangular Pulses in Noise

Optimal detection of rectangular pulses in noise is considered, subject to a sidelobe constraint which ensures adequate resolution capabilities, and a new sidelobe reduction filter is derived. Tests in the laboratory and on a Westinghouse AN/TPS-27 search radar system em indicate that use of the new filter substantially improves both resolution and clutter performance over such standard techniques as fast time constant (FTC), delay line differentiator (DLD), and pulse length discriminator (PLD).     

Adaptive digital beamforming for angle estimation in jamming

A radar digital beamforming (DBF) architecture and processing algorithm is described for nulling the signal from a mainlobe electronic jammer and multiple sidelobe electronic jammers while maintaining monopulse angle estimation accuracy on the target. The architecture consists of a sidelobe jamming (SLJ) cancelling adaptive array (AA) followed by a mainlobe jamming (MLJ) canceller. A mainlobe maintenance (MLM) technique or constrained adaptation during the sidelobe cancellation process is imposed so that the results of the SLJ cancellation process do not distort the subsequent mainlobe cancellation process. The SLJ signals and the MLJ signals are thus cancelled sequentially in separate processes. This technique was developed for improving radar processing in determining the angular location of a target, and specifically for improving the monopulse technique by maintaining the accuracy of the target echo monopulse ratio in the presence of electronic jamming by adaptive suppression of the jamming signals before forming the monopulse sum and difference beams     

Mismatched Filtering of Sonar Signals

A replica correlator (matched filter) is an optimum processor for a receiver employing a pulse of continuous wave (CW) signal in a white Gaussian noise background. In an active sonar, however, when the target of interest has low Doppler shift and is embedded in a high reverberation background, this is not so. High sidelobes of the correlator frequency response pass a significant portion of the signal contained in the mainlobe of the reverberation spectrum. In order to reduce the sidelobes of the correlator output spectrum and at the same time keep the increase in its 3 dB bandwidth to a small amount, we propose lengthening of the replica of the transmitted signal and weighting it by a Kaiser window. It is demonstrated that by extending the weighted replica by 50 percent compared with the transmitted signal, it is possible to reduce the sidelobe levels to at least 40 dB below the mainlobe peak, with the concomitant increase of the 3 dB band-width by less than 5 percent. The degradation in signal-to-noise ratio (SNR) performance for such a ?mismatched? filter receiver with respect to the matched filter is less than 1.5 dB.