机床主轴径向回转误差的测试与研究

给出了一种主轴回转误差动态测量的误差分离方法,提出了一套主轴回转精度的动态测试系统。该系统由位移测试单元、采样时钟单元、数据采集卡、通用计算机及数据处理软件组成。     

计算机辅助切削数据采集与处理系统

 本计算机辅助切削数据采集与处理系统由AA6140普通车床,AppleⅡ微计算机,刀具磨损测量子系统,切削力测量子系统,切削温度测量子系统,车床主轴转速监控子系统以及其它一些传感器、仪表组成。在系统软件的支持下,可同时进行切削力,切削温度和刀具耐用度试验,还可以进行快速刀具耐用度试验。由于实现了计算机化,集成化的数据采集,处理、存贮和输出,试验效率成倍提高。同时由于消除了人为误差因素,试验数据也更为可靠。     

BFT-10000五球疲劳实验机的研制

为了满足航空运动构件的疲劳寿命试验而研制的BFT-10000五球疲劳机,可实现大载荷、高转速运行,能够进行载荷谱或设定载荷加载,完成电机主轴的各级调速,从而满足疲劳实验的各种要求。本设备主要由机械实验机构和计算机数据采集及处理系统组成。     

航空发动机主轴试验器结构特点分析

航空发动机主轴是发动机关键零部件之一，是必须给出最大许用循环寿命的重要零件，由于主轴的应力状态复杂，因而必须在试验器上对主轴进行强度试验才能给出可靠的循环寿命。本文论述的发动机主轴立式综合加载试验器从结构特点出发，对试验器进行了比较详细的介绍和分析，结合试验中的具体数据评述了试验器在边界条件模拟、载荷的施加与检测、弯矩加载系统、振动扭矩加载系统等方面的设计特点。     

曲轴尺寸及形位公差综合检测原理的研究

本文对曲轴生产自动线上尺寸及形位公差综合检测系统中连杆轴颈检测的几种实施方案进行了分析，提出了主轴颈与连杆轴颈一次综合测量方案，讨论了一点和二点测量法的方法误差。     

一种高精度数据采集及控制系统设计

数据采集与控制系统是现代检测与控制技术的核心,工业控制领域对数据采集与控制系统的性能要求越来越高。设计了一种可拓展通道数目的高精度数据采集和控制系统,系统采用一主多从的模式,整个控制系统由CAN总线构成通讯网络,中央控制器负责整体调度各节点控制器的工作,节点控制器有3路高精度A／D和6路高精度D／A资源,负责各节点信号采集与控制。     

基于小波降噪和EMD-SVM的加工中心主轴系统状态监测技术

主轴系统是数控机床的重要功能部件,其运行状态直接影响机床的可靠性与加工精度。为了实现状态实时监测、故障预警和维修策略优化,针对加工中心主轴系统,设计了状态监测方案,研制和搭建了加工中心状态监测平台的硬件系统和软件系统。集成小波降噪方法和经验模态分解-支持向量机(EMD-SVM)算法对采集信号处理与分析,实现加工中心主轴系统的状态实时监测,进而对主轴系统典型故障状态进行识别与诊断。基于研制的加工中心主轴状态监测系统,进行了主轴系统皮带松动故障监测试验分析,验证其对主轴系统的典型故障状态识别的准确度。     

小型无人机大气数据采集系统的设计与实现

大气数据采集是小型无人机自动飞行控制系统的关键技术之一。根据小型无人机的飞行任务需求,设计了基于大气数据采集的高度、空速检测系统。该系统以TMS320F2812为核心,采用高精度A/D转换器(12位)提高测量精度,对于提高无人机大气数据检测的动态性能具有较高的应用价值。     

航空发动机主轴轴承状态监测研究现状与发展趋势

航空发动机主轴轴承承受着高温、高速、重载、贫油、断油等极端工况,其疲劳、磨损等失效问题严重影响发动机的可靠性.因此,对航空发动机主轴轴承的使用状态进行有效精确监测极为重要.对航空发动机主轴轴承工况特点、主要失效模式和失效机制进行了梳理;针对主轴轴承的状态监测方法和技术,总结并对比分析了现有主轴轴承振动、滑油状态、声音、...     

超精密低速油润滑滑动轴承主轴系

本文论述了超精密低速油润滑滑动轴承主轴系的结构及工作原理,进行了理论分析,提出了提高主轴回转精度的具体方法。本主轴系在低速旋转时,主轴最大径向误差不超过0.027微米(为与最小二乘圆偏差的峰峰值),主轴随机误差σ为0.0042微米,它具有承载能力大和长期使用勿需注油的特点。     

有翼高超声速再入飞行器气动设计难点问题

有翼高超声速再入飞行器是近年来的研究热点,气动设计是飞行器设计的关键。为了更清楚地认识有翼高超声速再入飞行器气动设计的难点问题,对有翼高超声速再入飞行器的发展、优势及总体任务剖面进行了介绍,从5个方面详细介绍了该类飞行器气动设计的难点问题,包括多约束复杂面对称气动布局设计、高温真实气体效应对气动特性影响、天地差异与天地换算方法、反作用控制系统(RCS)喷流干扰对气动特性的影响以及气动数据不确定度等,简要阐明了这些难点问题对总体设计的重要性以及初步的解决思路,为有翼高超声速再入飞行器气动设计提供了一些参考。     

Simulation and Analysis of Crashworthiness of Fuel Tank for Helicopters

Crashworthiness requirement of fuel tanks is one of the important requirements in helicopter designs. The relations among the protection frame, textile layer and rubber layer of the fuel tank are introduced. Two appropriate FE models are established, one is for an uncovered helicopter fuel tank without protection frame, and the other is for fuel tank with protection frame. The dynamic responses of the two types of fuel tanks impinging on the ground with velocities of 17.3 m/s are numerically simulated for the purpose of analyzing energy-absorbing capabilities of the textile layer and protection frame. The feasibility of the current crashworthiness design of the fuel tank is examined though comparing the dynamic response behaviors of the two fuel tanks.     

The effect of inlet conditions on the flow and heat transfer in multiple rotating cavity with axial throughflow

This paper discusses experimental results from two different build configurations of a heated multiple rotating cavity test rig.Measurements of heat transfer from the discs and tangential velocities are presented.The test rig is a 70% full scale version of a high pressure compressor stack of an axial gas turbine engine.Of particular interest are the internal cylindrical cavities formed by adjacent discs and the interaction of these with a central axial throughflow of cooling air.Tests were carried out for a range of non-dimensional parameters representative of high pressure compressor internal air system flows(Re up to 5×106 and Rez up to 2×105).Two different builds have been tested.The most significant difference between these two build configurations is the size of the annular gap between the(non-rotating) drive shaft and the bores of the discs.The heat transfer data were obtained from thermocouple measurements of surface temperature and a conduction solution method.The velocity measurements were made using a two component,LDA system.The heat transfer results from the discs show differences between the two builds.This is attributed to the wider annular gap allowing more of the throughflow to penetrate into the cavity.There are also significant differences between the radial distributions of tangential velocity in the two builds of the test rig.For the narrow annular gap,there is an increase of non-dimensional tangential velocity V/Ωr with radial location to solid body rotation V/Ωr=1.For the wider annular gap,the non-dimensional velocities show a decrease with radial location to solid body rotation.      

突破技术趋同，波音再现竞争优势

 波音公司面临着来自空客公司的巨大挑战,企业战略性创新才是公司成功的关键。为此波音公司的全部战略性研究集中在扩大产品的差异性上,体现在3个方面：电子化（e-Enabled）运营环境、整体复合材料机身部件的制造技术和支持波音787客机的全球协同环境（GCE）。     

临近空间飞行器测控与信息传输系统频段选择

 临近空间飞行器是高性能信息化武器平台,测控（TT&;C）与信息传输系统是其信息保障的核心,而选择合理、可行的频段是展开系统设计的前提和基础。频段选择影响到整个技术方案的制定,是一个需综合考虑、影响深远并具有战略意义的关键问题,从国际电联（ITU）国际标准、高速数传、接收信噪比（SNR）、“三抗”、超视距中继、黑障、雨衰以及设备研制成熟度8个方面全面、细致论证了近空间平台测控系统的频段选择问题,最终得出在视距链路中以Ka频段为宜,在超视距链路中以Ku/Ka双频段为宜的结论。     

基于弯曲激波压缩系统的高超声速进气道反设计研究进展

总结了近十年来弯曲激波压缩研究的主要成果。提出了弯曲激波压缩系统的新概念,即利用特殊设计的楔形弯曲压缩面或空间弯曲压缩面,产生一系列与前缘弱激波相互交汇或叠加的压缩波系,从而使前缘激波弯曲,形成特殊的弯曲激波,它与波后的等熵压缩波来共同完成对气流的压缩。在此基础上,实现了由给定出口气动参数的超声速内流道反设计,实现了由给定压缩面压力分布和给定压缩面马赫数分布要求的型面反设计,实现了由给定激波波面的压缩型面反设计。研究证明,弯曲压缩面-弯曲激波压缩系统具有良好的综合气动性能,为高性能高超声速进气系统的气动设计提供了一种全新的设计方法。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

(高)超声速流动试验技术及研究进展

近年来,与高速飞行器相关的(高)超声速流动受到了极大的关注。这类流动所具有的非定常性、强梯度和可压缩性对试验方法和风洞设计技术提出了挑战。超声速纳米示踪平面激光散射(NPLS)技术是由作者所在团队研发的非接触光学测试技术。它能够以较高的空间分辨率来揭示超声速三维流场的一个瞬态剖面的时间解析的流动结构。介绍了NPLS技术以及基于NPLS开发的密度场测量、雷诺应力测量和气动光学波前测量等方法,并回顾了这些技术在超声速边界层、超声速混合层、超声速压缩拐角、激波/边界层相互作用和光学头罩绕流等流动中的应用,清晰地再现了边界层、混合层、激波等典型流场结构及其时空演化特性。另外,为了模拟和研究高空大气条件下边界层自然转捩和超声速混合层的转捩特性,介绍了高超声速静风洞、超-超混合层风洞的设计技术以及层流化喷管的设计方法。     

Research on Auto-detection for Remainder Particles of Aerospace Relay Based on Wavelet Analysis

Aerospace relay is one kind of electronic components which is used widely in national defense system and aerospace system. The existence of remainder particles induces the reliability declining, which has become a severe problem in the development of aerospace relay. Traditional particle impact noise detection (PIND) method for remainder detection is ineffective for small particles, due to its low precision and involvement of subjective factors. An auto-detection method for PIND output signals is proposed in this paper, which is based on direct wavelet de-noising (DWD), cross-correlation analysis (CCA) and homo-filtering (HF), the method enhances the affectiv-ity of PIND test about the small particles. In the end, some practical PIND output signals are analysed, and the validity of this new method is proved.