A (design-oriented) reliability model for active phased arrays insatellite communication systems

This paper proposes a modeling approach to relate the power section reliability of satellite payloads to the on-board antenna complexity. The aim of the model is to support the development of design tools for satellite systems adopting active phased arrays. The achieved results are rendered parametric with respect to a key system requirement, the effective isotropic radiated power, due to its direct impact on transmitter configuration and technological features as well as on the critical compromise between transmitter and antenna specifications     

基于VLBI的上行组阵标校技术研究

天线组阵能否完全替代大口径天线有一个关键性难题,就是天线阵是否支持上行链路组阵。深空航天器无法将不同地面天线的上行信号对齐,所以上行链路信号的调整必须在地面完成。针对上行组阵发射机相位调整问题,提出一种基于VLBI(Very Long Baseline Interferometry,甚长基线干涉测量)技术的接收模式天线上行组阵标校方案,并对标校精度进行了简要分析。将上行链路时延分解为几何时延和发射系统时延,建立了几何时延模型,通过标定接收时延和发射时延,便可以得到天线阵元间的相位标校值。理论分析结果表明,该方案具有一定的可行性,对上行组阵相位标校的研究具有一定的借鉴意义。     

大气湍流对APD直接检测接收机抗噪声性能影响

针对以往分析湍流信道对系统抗噪声性能影响的不足,给出了一种基于APD直接检测接收机的湍流噪声的处理方法.在APD直接检测接收机模型的基础上,推导了其信噪比和曼彻斯特编码系统的差错概率,并详细分析了湍流对接收机的抗噪声性能影响.结果表明,增大接收天线孔径可以减弱湍流的影响,但在天线孔径较小时,增加发射功率并不能有效地提高...     

空域数据重排的后多普勒自适应处理方法

传统的后多普勒自适应处理方法,如因子法(FA)和扩展因子法(EFA)虽然能大大降低自适应处理时的运算量和独立同分布样本的需求量,但由于实际中均匀训练样本数目的限制,当天线阵元数进一步增大时,FA和EFA抑制杂波和检测动目标的能力会显著恶化。针对这一问题,提出了一种空域数据重排的后多普勒自适应处理方法。该方法将多普勒滤波后的空域数据重排为一行列数相近的矩阵,空域滤波器权系数也表示成可分离的形式,从而得到一双二次代价函数,利用循环迭代的思想求解权系数。实验表明该方法具有快速收敛,所需训练样本少的优点,尤其在大阵列、小样本条件下该方法抑制杂波的性能明显优于FA和EFA。     

Terrain modeling for microwave landing system

A powerful analytical approach for evaluating the terrain effects on a microwave landing system (MLS) is presented. The approach combines a multiplate model with a powerful and exhaustive ray tracing technique and an accurate formulation for estimating the electromagnetic fields due to the antenna array in the presence of terrain. Both uniform theory of diffraction (UTD) and impedance UTD techniques have been employed to evaluate these fields. Innovative techniques are introduced at each stage to make the model versatile to handle most general terrain contours and also to reduce the computational requirement to a minimum. The model is applied to several terrain geometries, and the results are discussed     

一种新型低剖面双频微带导航天线

设计了一种可以同时工作在BD2B3与GPS L1频段的低剖面微带导航天线,采用多调谐回路技术实现了天线双频工作。该天线方便调试与实现,可以应用于要求天线剖面较低的载体。     

一种航空发动机数控系统可靠度分配的方法

在V ague集理论的表决模型中引入了倾向性因子,并据此提出了一种可靠性影响因素赋权的方法。将此方法与模糊综合评判理论结合,建立了综合评判系统各单元之间相对失效系数的模型。然后借助该模型及MATLAB软件,提出了一种具有冷贮备单元的航空发动机数控系统可靠度的模糊分配方法。该方法适用于缺乏可靠性数据的方案论证及初步设计阶段。      

Computer Simulation of VLF Power Amplifiers under Reactive Loading

Recent efforts have been made to achieve substantially increased baud rates with the U. S. Navy's very low frequency (VLF) communication system. Because of the constraints imposed by existing transmitter and antenna structures it was necessary to reexamine the operation of every major system component. Each particular VLF transmitter was subjected to an extensive theoretical analysis followed by a detailed on-site measurement program. Following a review of three major systems, Cutler, Lualualei, and North West Cape, a sufficient body of data was available to substantiate the validity of the computer-simulated transmitter analysis presented here. With this method it is possibe to predict frequency-shift keying (FSK) and minimum shift keying (MSK) performance limitations for particular VLF transmitting systems based primarily on the 0 of the antenna at the operating frequency.     

Real-time fault detection method based on belief rule base for aircraft navigation system

Real-time and accurate fault detection is essential to enhance the aircraft navigation system’s reliability and safety. The existent detection methods based on analytical model draws back at simultaneously detecting gradual and sudden faults. On account of this reason, we propose an online detection solution based on non-analytical model. In this article, the navigation system fault detection model is established based on belief rule base (BRB), where the system measuring residual and its changing rate are used as the inputs of BRB model and the fault detection function as the output. To overcome the drawbacks of current parameter optimization algorithms for BRB and achieve online update, a parameter recursive estimation algorithm is presented for online BRB detection model based on expectation maximization (EM) algorithm. Furthermore, the proposed method is verified by navigation experiment. Experimental results show that the proposed method is able to effectively realize online parameter evaluation in navigation system fault detection model. The output of the detection model can track the fault state very well, and the faults can be diagnosed in real time and accurately. In addition, the detection ability, especially in the probability of false detection, is superior to offline optimization method, and thus the system reliability has great improvement.     

Investigation on Thermal Contact Conductance Based on Data Analysis Method of Reliability

The method of reliability is proposed for the investigation of thermal contact conductance (TCC) in this study. A new definition is introduced, namely reliability thermal contact conductance (RTCC), which is defined as the TCC value that meets the reliability design requirement of the structural materials under consideration. An experimental apparatus with the compensation heater to test the TCC is introduced here. A practical engineering example is utilized to demonstrate the applicability of the proposed approach. By using a statistical regression model along with experimental data obtained from the interfaces of the structural materials GH4169 and K417 used in aero-engine, the estimate values and the confidence level of TCC and RTCC values are studied and compared. The results show that the testing values of TCC increase with interface pressure and the proposed RTCC model matches the test results better at high interface pressure.     

一个Modified Chen系统的混沌同步与加密

引进Observer同步方案,ModifiedChen混沌动力系统达到了较好的同步效果。两个已同步的ModifiedChen系统分别作为通信系统的传输器和接收器,分别利用两种不同的方式将信号加到传输端,实现了安全通信巾的加密与解密,从而验证了Observer混沌同步方案在安全通信系统中的有效性。     

一种基于FPGA的航空发动机独立超转保护系统

针对航空发动机超转故障,提出一种基于现场可编程逻辑门阵列(FPGA)的独立超转保护系统.介绍了系统的总体设计方案、超转判断方法及故障诊断方式.该系统采用双双余度结构,通过线性分类器和时间窗内加权表决判断方法,提高超转保护功能可靠性.通过3层级机内自测试(BIT)监视静默失效,满足适航要求.硬件在回路仿真平台试验结果表明:该系统超转判断准确可靠,并能在连续判断超转后进入锁定保护状态,有效避免超转事故的发生.目前,研究成果已应用于某型发动机全权限数字控制(FADEC)系统中.      

卫星激光通信终端控制系统稳定性设计

卫星激光通信终端控制系统的稳定性是激光通信链路建立与保持过程中的重要性能指标.以终端天线与快速倾斜镜(FSM)个内回路控制器设计为基础,建立了当电荷耦合(CCD)探测器获得对方终端位置信息构成激光闭合回路时整个激光通信控制系统模型,并根据时滞依赖稳定性定理推导了系统渐近稳定的充分条件,在此基础上对不稳定情况,结合锥补法...     

航空发动机转速传感器振动试验载荷确定及应用

航空发动机成品振动试验多数参考振动环境试验相关标准执行,没有真正意义上结合成品的振动特性与发动机实测振动环境确定振动试验载荷,导致成品内场试验潜在问题没有暴露出来,外场交付使用问题频发,严重影响发动机可靠性水平.以某型发动机转速传感器为研究对象,详细地阐述了转速传感器振动环境载荷确定的工作流程和方法,提出了基于疲劳次数的正弦振动试验方法并完成了产品的试验验证,发现了壳体裂纹、输出断路等故障,将改进后的产品进行回归验证,故障未再发生.基于实测数据制定的正弦振动试验方法,对转速传感器的结构完整性进行了验证,可为确定传感器类成品试验载荷和验证产品的可靠性水平提供新的方法.     

基于贮存退化机理的长贮产品序贯检测方法

为了确定发动机等长贮产品满足一定贮存可靠度要求的最优检测方式,提出了基于贮存退化机理的序贯检测方法.分析了长贮产品贮存寿命的退化机理,即不可修部件的自然老化和可修部件的检测均可能造成贮存寿命的退化;然后基于贮存退化机理给出了Weibull分布产品贮存可靠度模型及模型参数估计的最小二乘方法;进一步,根据贮存可靠度要求,给...     

系统可靠性的贝叶斯网络评估方法

 针对现有组合法与状态法在可靠性评估方法中的局限性,对基于贝叶斯网络的系统可靠性评估新方法进行了研究。运用该方法进行可靠性评估,不但能计算出系统的可靠性指标,而且能方便地给出一个或几个部件对系统可靠性影响的大小,识别系统的薄弱环节。结合故障树方法建立系统可靠性评估的贝叶斯网络模型,并用实例阐述了贝叶斯网络方法进行系统可靠性评估的有效性。同时通过对贝叶斯网络的条件失效概率与系统可靠性评估中常用重要度指标的对比分析表明,贝叶斯网络的推理算法更便于查找系统的薄弱环节。     

柔性天线面对漂浮基星载天线扰动分析及抑制

 为了研究柔性天线面弹性变形对漂浮基星载天线的扰动,采用固定界面模态综合法和Lagrange方法,通过轴末端与天线面交界面的协调关系,推导了大范围运动的星载天线刚柔耦合动力学模型,其所建立的动力学模型计算效率高并具有足够的精度。分析了柔性天线面弹性变形对星载天线的扰动,利用PD+振动力反馈控制抑制系统振动,并基于Lyapunov方法证明了控制系统的渐近稳定性。仿真结果表明：天线工作过程激起了柔性天线面弹性振动,进而引起星载天线的抖动,严重影响了星载天线的指向精度;利用其控制策略能快速抑制系统振动。结论对天线指向精度的分析与控制具有重要的理论价值及工程实际意义。     

Moving target localization in distributed MIMO radar with transmitter and receiver location uncertainties

In this paper, the problem of moving target localization from Bistatic Range(BR) and Bistatic Range Rate(BRR) measurements in a Multiple-Input Multiple-Output(MIMO) radar system having widely separated antennas is investigated. We consider a practically motivated scenario,where the accurate knowledge of transmitter and receiver locations is not known and only the nominal values are available for processing. With the transmitter and receiver location uncertainties,which are usually neglected in MIMO radar systems by prior studies, taken into account in the measurement model, we develop a novel algebraic solution to reduce the estimation error for moving target localization. The proposed algorithm is based on the pseudolinear set of equations and two-step weighted least squares estimation. The Cramer-Rao Lower Bound(CRLB) is derived in the presence of transmitter and receiver location uncertainties. Theoretical accuracy analysis demonstrates that the proposed solution attains the CRLB, and numerical examples show that the proposed solution achieves significant performance improvement over the existing algorithms.     

A new approach to fuzzy dynamic fault tree analysis using the weakest n-dimensional t-norm arithmetic

Dynamic fault tree analysis is widely used for the reliability analysis of the complex system with dynamic failure characteristics. In many circumstances, the exact value of system reliability is difficult to obtain due to absent or insufficient data for failure probabilities or failure rates of components. The traditional fuzzy operation arithmetic based on extension principle or interval theory may lead to fuzzy accumulations. Moreover, the existing fuzzy dynamic fault tree analysis methods are restricted to the case that all system components follow exponential time-to-failure distributions. To overcome these problems, a new fuzzy dynamic fault tree analysis approach based on the weakest n-dimensional t-norm arithmetic and developed sequential binary decision diagrams method is proposed to evaluate system fuzzy reliability. Compared with the existing approach, the proposed method can effectively reduce fuzzy cumulative and be applicable to any time-to-failure distribution type for system components. Finally, a case study is presented to illustrate the application and advantages of the proposed approach.     

利用旋转双天线载波相位双差的欺骗干扰检测技术

有效的欺骗干扰检测是防止卫星导航接收机被欺骗干扰攻击的前提。提出了一种基于旋转双天线载波相位双差的卫星导航接收机欺骗干扰检测技术,在对接收机双天线匀速旋转时输出载波相位测量值进行载波相位双差处理后,利用广义似然比检验实现了对单一发射天线输出欺骗干扰信号的检测。进一步分析了旋转半径和数据长度对检测性能的影响,并与旋转单天线和天线阵载波相位双差欺骗干扰检测方法的性能进行了对比。最后,通过蒙特卡罗方法进行了仿真验证,结果表明了该检测方法和检测性能分析的正确性。