The Lunar Orbiter Laser Altimeter Investigation on the Lunar Reconnaissance Orbiter Mission

The Lunar Orbiter Laser Altimeter (LOLA) is an instrument on the payload of NASA’s Lunar Reconnaissance Orbiter spacecraft (LRO) (Chin et al., in Space Sci. Rev. 129:391–419, 2007). The instrument is designed to measure the shape of the Moon by measuring precisely the range from the spacecraft to the lunar surface, and incorporating precision orbit determination of LRO, referencing surface ranges to the Moon’s center of mass. LOLA has 5 beams and operates at 28 Hz, with a nominal accuracy of 10 cm. Its primary objective is to produce a global geodetic grid for the Moon to which all other observations can be precisely referenced.     

Kinetic-Gasdynamic Modeling of the Heliospheric Interface

Heliospheric energetic neutral atoms (ENAs) that will be measured by the Interstellar Boundary Explorer (IBEX) originate from the heliosheath. The heliosheath is formed as a result of the interaction of the solar wind (SW) with the circum-heliospheric interstellar medium (CHISM). The expected fluxes of ENAs are strongly dependent on the nature of this interaction. In turn, the interaction of the solar wind with the local interstellar cloud has a complex and multi-component nature. Detailed theoretical modeling of the interaction between the SW and the local interstellar medium is required to understand the physics of the heliosheath and to predict and explain the heliospheric ENAs. This paper summarizes current state-of-art kinetic-gasdynamic models of the SW/CHISM interaction. We shall restrict our discussion to the kinetic-gasdynamic and kinetic-magnetohydrodynamic (MHD) models developed by the Moscow group. This paper summarizes briefly the main results of the first self-consistent, two-component, kinetic-gasdynamic model by Baranov and Malama (J. Geophys. Res. 98:15157–15163, 1993), presents new results obtained from the 3D kinetic-MHD model by Izmodenov et al. (Astron. Astrophys. 437:L35–L38, 2005a), describes the basic formulation and results of the model by Malama et al. (Astron. Astrophys. 445:693–701, 2006) as well as reports current developments in the model. This self-consistent model considers pickup protons as a separate non-equilibrium component. Then we discuss a stochastic acceleration model for pickup protons in the supersonic solar wind and in the heliosheath. We also present the expected heliospheric ENA fluxes obtained in the framework of the models.     

Kinetic-Hydrodynamic Models of the Solar Wind Interaction with the Partially Ionized Supersonic Flow of the Local Interstellar Gas: Predictions and Interpretations of the Experimental Data

At present there is no doubt that the local interstellar medium (LISM) is mainly partially ionized hydrogen gas moving with a supersonic flow relative to the solar system. The bulk velocity of this flow is approximately equal ～26 km/s. Although the interaction of the solar wind with the charged component (below plasma component) of the LISM can be described in the framework of hydrodynamic approach, the interaction of H atoms with the plasma component can be correctly described only in the framework of kinetic theory because the mean free path of H atoms in the main process of the resonance charge exchange is comparable with a characteristic length of the problem considered. Results of self-consistent, kinetic-hydrodynamic models are considered in this review paper. First, such the model was constructed by Baranov and Malama (J. Geophys. Res. 98(A9):15,157–15,163, 1993). Up to now it is mainly developed by Moscow group taking into account new experimental data obtained onboard spacecraft studying outer regions of the solar system (Voyager 1 and 2, Pioneer 10 and 11, Hubble Space Telescope, Ulysses, SOHO and so on). Predictions and interpretations of experimental data obtained on the basis of these models are presented. Kinetic models for describing H atom motion were later suggested by Fahr et al. (Astron. Astrophys 298:587–600, 1995) and Lipatov et al. (J. Geophys. Res. 103(A9):20,631–20,642, 1998). However they were not self-consistent and did not incorporate sources to the plasma component. A self-consistent kinetic-hydrodynamic model suggested by Heerikhuisen et al. (J. Geophys. Res. 111:A06110, 2006, Astrophys. J. 655:L53–L56, 2007) was not tested on the results by Baranov and Malama (J. Geophys. Res. 111:A06110, 1993) although it was suggested much later. Besides authors did not describe in details their Monte Carlo method for a solution of the H atom Boltzmann equation and did not inform about an accuracy of this method. Therefore the results of Heerikhuisen et al. (J. Geophys. Res. 111:A06110, 2006) are in open to question and will not be considered in this review paper. That is why below we will mainly consider a progress of the Moscow group on heliospheric modelling endeavours in the kinetic-hydrodynamic approach. Criticism of the models that treat interstellar hydrogen in the heliosphere as several fluids is given. It is shown that the multi-fluid models give rise to unreal results especially for distributions of neutral component parameters. Magnetohydrodynamic (MHD) modelling of the solar wind interaction with the LISM gas is also reviewed.     

Testing General Relativity with Atomic Clocks

We discuss perspectives for new tests of general relativity which are based on recent technological developments as well as new ideas. We focus our attention on tests performed with atomic clocks and do not repeat arguments present in the other contributions to the present issue (Space Sci. Rev. 2009, This Issue). In particular, we present the scientific motivations of the space projects ACES (Salomon et al. in CR Acad. Sci. IV-2:1313, 2001) and SAGAS (Wolf et al. in Exp. Astron. 23:651, 2009).     

Chemical Composition of Icy Satellite Surfaces

Much of our knowledge of planetary surface composition is derived from remote sensing over the ultraviolet through infrared wavelength ranges. Telescopic observations and, in the past few decades, spacecraft mission observations have led to the discovery of many surface materials, from rock-forming minerals to water ice to exotic volatiles and organic compounds. Identifying surface materials and mapping their distributions allows us to constrain interior processes such as cryovolcanism and aqueous geochemistry. The recent progress in understanding of icy satellite surface composition has been aided by the evolving capabilities of spacecraft missions, advances in detector technology, and laboratory studies of candidate surface compounds. Pioneers 10 and 11, Voyagers I and II, Galileo, Cassini and the New Horizons mission have all made significant contributions. Dalton (Space Sci. Rev., 2010, this issue) summarizes the major constituents found or inferred to exist on the surfaces of the icy satellites (cf. Table 1 from Dalton, Space Sci. Rev., 2010, this issue), and the spectral coverage and resolution of many of the spacecraft instruments that have revolutionized our understanding (cf. Table 2 from Dalton, Space Sci. Rev., 2010, this issue). While much has been gained from these missions, telescopic observations also continue to provide important constraints on surface compositions, especially for those bodies that have not yet been visited by spacecraft, such as Kuiper Belt Objects (KBOs), trans-Neptunian Objects (TNOs), Centaurs, the classical planet Pluto and its moon, Charon. In this chapter, we will discuss the major satellites of the outer solar system, the materials believed to make up their surfaces, and the history of some of these discoveries. Formation scenarios and subsequent evolution will be described, with particular attention to the processes that drive surface chemistry and exchange with interiors. Major similarities and differences between the satellites are discussed, with an eye toward elucidating processes operating throughout the outer solar system. Finally we discuss the outermost satellites and other bodies, and summarize knowledge of their composition. Much of this review is likely to change in the near future with ongoing and planned outer planet missions, adding to the sense of excitement and discovery associated with our exploration of our planetary neighborhood.     

Updated Review of Planetary Atmospheric Electricity

This paper reviews the progress achieved in planetary atmospheric electricity, with focus on lightning observations by present operational spacecraft, aiming to fill the hiatus from the latest review published by Desch et al. (Rep. Prog. Phys. 65:955–997, 2002). The information is organized according to solid surface bodies (Earth, Venus, Mars and Titan) and gaseous planets (Jupiter, Saturn, Uranus and Neptune), and each section presents the latest results from space-based and ground-based observations as well as laboratory experiments. Finally, we review planned future space missions to Earth and other planets that will address some of the existing gaps in our knowledge.     

An Overview of the Lunar Crater Observation and Sensing Satellite (LCROSS)

The Lunar Crater Observation Sensing Satellite (LCROSS), an accompanying payload to the Lunar Reconnaissance Orbiter (LRO) mission (Vondrak et al. 2010), was launched with LRO on 18 June 2009. The principle goal of the LCROSS mission was to shed light on the nature of the materials contained within permanently shadowed lunar craters. These Permanently Shadowed Regions (PSRs) are of considerable interest due to the very low temperatures, <120?K, found within the shadowed regions (Paige et al. 2010a, 2010b) and the possibility of accumulated, cold-trapped volatiles contained therein. Two previous lunar missions, Clementine and Lunar Prospector, have made measurements that indicate the possibility of water ice associated with these PSRs. LCROSS used the spent LRO Earth-lunar transfer rocket stage, an Atlas V Centaur upper stage, as a kinetic impactor, impacting a PSR on 9 October 2009 and throwing ejecta up into sunlight where it was observed. This impactor was guided to its target by a Shepherding Spacecraft (SSC) which also contained a number of instruments that observed the lunar impact. A?campaign of terrestrial ground, Earth orbital and lunar orbital assets were also coordinated to observe the impact and subsequent crater and ejecta blanket. After observing the Centaur impact, the SSC became an impactor itself. The principal measurement goals of the LCROSS mission were to establish the form and concentration of the hydrogen-bearing material observed by Lunar Prospector, characterization of regolith within a PSR (including composition and physical properties), and the characterization of the perturbation to the lunar exosphere caused by the impact itself.     

Spacecraft telemetry link performance in a transfer orbit

There are several critical periods early in the mission of a geo-stationary communication satellite. The first is the period from launch vehicle ignition until the upper stage final successful burn. The second is after the above span until the vehicle reaches its final altitude of a synchronous orbit. For a nominal low thrust apogee boost ascent subsystem during that later time, almost continuous telemetry is mandatory. This is especially true during the crucial periods of main engine burns and attitude correction phases. Maintaining a strong telemetry link throughout this phase requires an adequate RF signal link from the spacecraft to a ground station in the telemetry RF channel. An analysis of this link performance during each orbit until final position has two major aspects. One, the location of the spacecraft in relation to the ground tracking station at each moment in the mission is a matter of geometry and Keplerian physics. The other is the RF signal and its supporting subsystems, both on the ground and aboard the vehicle. The fundamental theoretical considerations or both the orbit parameters and radio link components are examined and then the individual parameter sensitivities are analyzed. Next, a nominal cast for a generic mission is studied. This survey considers the telemetry performance during each major stage of the flight from the launch through the transfer orbit to the postinjection period to the final orbit. Then abnormal situations due to both orbit and RF faults are examined. Finally, some design and operation concepts which may lessen the impact of the previous anomalies, are presented     

New Horizons Mission Design

In the first mission to Pluto, the New Horizons spacecraft was launched on January 19, 2006, and flew by Jupiter on February 28, 2007, gaining a significant speed boost from Jupiter’s gravity assist. After a 9.5-year journey, the spacecraft will encounter Pluto on July 14, 2015, followed by an extended mission to the Kuiper Belt objects for the first time. The mission design for New Horizons went through more than five years of numerous revisions and updates, as various mission scenarios regarding routes to Pluto and launch opportunities were investigated in order to meet the New Horizons mission’s objectives, requirements, and goals. Great efforts have been made to optimize the mission design under various constraints in each of the key aspects, including launch window, interplanetary trajectory, Jupiter gravity-assist flyby, Pluto–Charon encounter with science measurement requirements, and extended mission to the Kuiper Belt and beyond. Favorable encounter geometry, flyby trajectory, and arrival time for the Pluto–Charon encounter were found in the baseline design to enable all of the desired science measurements for the mission. The New Horizons mission trajectory was designed as a ballistic flight from Earth to Pluto, and all energy and the associated orbit state required for arriving at Pluto at the desired time and encounter geometry were computed and specified in the launch targets. The spacecraft’s flight thus far has been extremely efficient, with the actual trajectory error correction ΔV being much less than the budgeted amount.     

S/WAVES: The Radio and Plasma Wave Investigation on the STEREO Mission

This paper introduces and describes the radio and plasma wave investigation on the STEREO Mission: STEREO/WAVES or S/WAVES. The S/WAVES instrument includes a suite of state-of-the-art experiments that provide comprehensive measurements of the three components of the fluctuating electric field from a fraction of a hertz up to 16 MHz, plus a single frequency channel near 30 MHz. The instrument has a direction finding or goniopolarimetry capability to perform 3D localization and tracking of radio emissions associated with streams of energetic electrons and shock waves associated with Coronal Mass Ejections (CMEs). The scientific objectives include: (i) remote observation and measurement of radio waves excited by energetic particles throughout the 3D heliosphere that are associated with the CMEs and with solar flare phenomena, and (ii) in-situ measurement of the properties of CMEs and interplanetary shocks, such as their electron density and temperature and the associated plasma waves near 1 Astronomical Unit (AU). Two companion papers provide details on specific aspects of the S/WAVES instrument, namely the electric antenna system (Bale et al., Space Sci. Rev., 2007) and the direction finding technique (Cecconi et al., Space Sci. Rev., 2007).     

ENA Imaging of the Inner Heliosheath—Preparing for the Interstellar Boundary Explorer (IBEX)

The Voyager 1 and 2 spacecraft recently crossed the termination shock and are currently sending back groundbreaking and detailed observations at two locations in the inner heliosheath. Complementary global observations will soon be provided by the Interstellar Boundary Explorer—IBEX, which measures energetic neutral atoms (ENAs) produced via charge exchange with energetic protons in this region. While several data sets from instruments on other spacecraft have provided tantalizing observations that might be heliosheath ENAs, none has definitively shown that they are observing this source. In contrast, IBEX has been specifically designed and developed to make all-sky observations of inner heliosheath ENAs with very high sensitivity and signal to noise. These observations will provide the critical global perspective required to understand the three-dimensional heliospheric interaction with the Circum-Heliospheric Interstellar Medium (CHISM). This paper, written prior to the launch of IBEX, reviews previous observations and provides background on this important new mission.     

新一代多用途载人飞船概念研究

在"神舟"载人飞船进入成熟稳定期后,中国有必要尽早启动新一代多用途载人飞船的论证和研制。本文对国外新一代载人飞船的技术方案特点、新的设计理念及发展现状进行了分析,从适应多任务、降低运营成本、钝头体气动外形、更高安全可靠性以及新型轻质材料使用等多个方面总结了国外新一代载人飞船的技术发展趋势。初步分析了中国发展新一代载人飞船的近地轨道、载人登月、载人登小行星、载人登火星等任务需求,基本确定了新一代飞船的总体性能参数,并在此基础上梳理了新一代载人飞船技术途径,初步提出了两种方案设想,为中国新一代载人飞船的研制提供参考。     

The Interstellar Boundary Explorer High Energy (IBEX-Hi) Neutral Atom Imager

The IBEX-Hi Neutral Atom Imager of the Interstellar Boundary Explorer (IBEX) mission is designed to measure energetic neutral atoms (ENAs) originating from the interaction region between the heliosphere and the local interstellar medium (LISM). These ENAs are plasma ions that have been heated in the interaction region and neutralized by charge exchange with the cold neutral atoms of the LISM that freely flow through the interaction region. IBEX-Hi is a single pixel ENA imager that covers the ENA spectral range from 0.38 to 6 keV and shares significant energy overlap and overall design philosophy with the IBEX-Lo sensor. Because of the anticipated low flux of these ENAs at 1 AU, the sensor has a large geometric factor and incorporates numerous techniques to minimize noise and backgrounds. The IBEX-Hi sensor has a field-of-view (FOV) of 6.5°×6.5° FWHM, and a 6.5°×360° swath of the sky is imaged over each spacecraft spin. IBEX-Hi utilizes an ultrathin carbon foil to ionize ENAs in order to measure their energy by subsequent electrostatic analysis. A multiple coincidence detection scheme using channel electron multiplier (CEM) detectors enables reliable detection of ENAs in the presence of substantial noise. During normal operation, the sensor steps through six energy steps every 12 spacecraft spins. Over a single IBEX orbit of about 8 days, a single 6.5°×360° swath of the sky is viewed, and re-pointing of the spin axis toward the Sun near perigee of each IBEX orbit moves the ecliptic longitude by about 8° every orbit such that a full sky map is acquired every six months. These global maps, covering the spectral range of IBEX-Hi and coupled to the IBEX-Lo maps at lower and overlapping energies, will answer fundamental questions about the structure and dynamics of the interaction region between the heliosphere and the LISM.     

MESSENGER Mission Design and Navigation

Nearly three decades after the Mariner 10 spacecraft’s third and final targeted Mercury flyby, the 3 August 2004 launch of the MESSENGER (MErcury Surface, Space ENvironment, GEochemistry, and Ranging) spacecraft began a new phase of exploration of the closest planet to our Sun. In order to ensure that the spacecraft had sufficient time for pre-launch testing, the NASA Discovery Program mission to orbit Mercury experienced launch delays that required utilization of the most complex of three possible mission profiles in 2004. During the 7.6-year mission, the spacecraft’s trajectory will include six planetary flybys (including three of Mercury between January 2008 and September 2009), dozens of trajectory-correction maneuvers (TCMs), and a year in orbit around Mercury. Members of the mission design and navigation teams optimize the spacecraft’s trajectory, specify TCM requirements, and predict and reconstruct the spacecraft’s orbit. These primary mission design and navigation responsibilities are closely coordinated with spacecraft design limitations, operational constraints, availability of ground-based tracking stations, and science objectives. A few days after the spacecraft enters Mercury orbit in mid-March 2011, the orbit will have an 80° inclination relative to Mercury’s equator, a 200-km minimum altitude over 60°N latitude, and a 12-hour period. In order to accommodate science goals that require long durations during Mercury orbit without trajectory adjustments, pairs of orbit-correction maneuvers are scheduled every 88 days (once per Mercury year).     

The Dawn Spacecraft

The Dawn spacecraft is designed to travel to and operate in orbit around the two largest main belt asteroids, Vesta and Ceres. Developed to meet a ten-year life and fully redundant, the spacecraft accommodates an ion propulsion system, including three ion engines and xenon propellant tank, utilizes large solar arrays to power the engines, carries the science instrument payload, and hosts the hardware and software required to successfully collect and transmit the scientific data back to Earth. The launch of the Dawn spacecraft in September 2007 from Cape Canaveral Air Force Station was the culmination of nearly five years of design, development, integration and testing of this unique system, one of the very few scientific spacecraft to rely on ion propulsion. The Dawn spacecraft arrived at its first destination, Vesta, in July 2011, where it will conduct science operations for twelve months before departing for Ceres.     

基于二次点火的飞行器横向转移入轨弹道设计

为了解决航天器发射过程因发射场地的地理位置约束造成的入轨夹角问题,基于火箭上面级二次点火,对航天器横向转移零速度偏差入轨弹道进行了设计。对二次点火和变射面横向转移弹道进行了研究,根据横向转移弹道特点,为简化控制程序,分时序对火箭二级非连续点火纵横向飞行程序进行了设计;并分析横向转移入轨弹道各项约束条件,建立弹道优化模型。根据弹道设计模型,以某两级液体燃料运载火箭为研究对象,对二次点火横向转移入轨弹道进行优化仿真。结果表明:入轨时刻航天器位置偏差为0.391m,速度偏差为1.277m/s,速度偏差比二次点火固定射面入轨弹道减少了737.844m/s,满足零速度偏差入轨精度要求。      

Electric Fields and Magnetic Fields in the Plasmasphere: A Perspective From CLUSTER and IMAGE

The electric field and magnetic field are basic quantities in the plasmasphere measured since the 1960s. In this review, we first recall conventional wisdom and remaining problems from ground-based whistler measurements. Then we show scientific results from Cluster and Image, which are specifically made possible by newly introduced features on these spacecraft, as follows. 1. In situ electric field measurements using artificial electron beams are successfully used to identify electric fields originating from various sources. 2. Global electric fields are derived from sequences of plasmaspheric images, revealing how the inner magnetospheric electric field responds to the southward interplanetary magnetic fields and storms/substorms. 3. Understanding of sub-auroral polarization stream (SAPS) or sub-auroral ion drifts (SAID) are advanced through analysis of a combination of magnetospheric and ionospheric measurements from Cluster, Image, and DMSP. 4. Data from multiple spacecraft have been used to estimate magnetic gradients for the first time.     

A Composition Analysis Tool for the Solar Wind Around Pluto (SWAP) Instrument on New Horizons

We describe the response of the Solar Wind Around Pluto (SWAP) instrument (McComas et al. in Space Sci. Rev. 140:261, 2008) to 1–40 amu ions in order to assess whether it can be used to determine plasma composition. Our goal is to enhance the scientific return on the SWAP plasma measurements obtained during the New Horizons traversal down Jupiter’s magnetotail in 2007. We present calibration data for the SWAP flight instrument and another largely flight-like SWAP sensor, dubbed “SWAP-II”. SWAP’s mass-dependent response was characterized by analyzing the count ratios from its two channel electron multipliers (CEMs). We observe significant differences in the instrument response between light (mass ≤ He) and heavy (mass > He) ions, especially for energies below ～4 keV. We attribute these differences to the mass-dependent electron emission yield from SWAP’s ultra-thin (～1 μg/cm²) carbon foil. Using these results, we develop a plasma composition analysis technique to statistically distinguish between light and heavy plasma ions measured by the instrument.     

The SOHO concept and its realisation

The Solar and Heliospheric Observatory (SOHO) — a space observatory to be placed, in 1995, 1.5 Gm sunward from the Earth in a halo orbit around the L1 Lagrange point — will investigate:

the solar corona, its heating and expansion into the solar wind, by both studying the radiation emerging from the outer solar atmosphere and in-situ solar wind measurements near 1 AU, and

the structure and dynamics of the solar interior by the method of helioseismology.

The science policy evolution leading to this comprehensive observatory concept is described. SOHO's link to the space-plasma-physics mission CLUSTER — devoted to the three-dimensional study of small structures in the magnetosphere — within the Solar Terrestrial Science Programme (STSP) and the embedding of STSP in the much larger International Solar Terrestrial Physics (ISTP) Programme are cited as well. The scientific subjects to be addressed by SOHO are introduced, and their current status assessed. Subsequently, the measurements required to advance these subjects are stated quantitatively and the payload, which will actually perform these measurements, is presented. The mission design, comprising spacecraft, orbit, operations and the data and ground systems are described. The special efforts made to obtain a reliable radiometric calibration of the instruments observing the Sun in the extreme-ultraviolet and to achieve a stable sensitivity through extreme cleanliness of spacecraft and instruments are emphasized and substantiated.     

Advances in Plasmaspheric Wave Research with CLUSTER and IMAGE Observations

This paper highlights significant advances in plasmaspheric wave research with Cluster and Image observations. This leap forward was made possible thanks to the new observational capabilities of these space missions. On one hand, the multipoint view of the four Cluster satellites, a unique capability, has enabled the estimation of wave characteristics impossible to derive from single spacecraft measurements. On the other hand, the Image experiments have enabled to relate large-scale plasmaspheric density structures with wave observations and provide radio soundings of the plasmasphere with unprecedented details. After a brief introduction on Cluster and Image wave instrumentation, a series of sections, each dedicated to a specific type of plasmaspheric wave, put into context the recent advances obtained by these two revolutionary missions.