利用外场数据对产品工龄-可靠性特性的研究

本文采用了三参数相关系数优化法与图估法相结合的数据处理方法,利用外场数据,对某型航空发动机的工龄-可靠性特性进行了分析,得到相应的结论和对维修方式的建议。     

Global Gravity Field Recovery Using Solely GPS Tracking and Accelerometer Data from Champ

A new long-wavelength global gravity field model, called EIGEN-1, has been derived in a joint German-French effort from orbit perturbations of the CHAMP satellite, exploiting CHAMP-GPS satellite-to-satellite tracking and on-board accelerometer data over a three months time span. For the first time it becomes possible to recover the gravity field from one satellite only. Thanks to CHAMP'S tailored orbit characteristics and dedicated instrumentation, providing continuous tracking and on-orbit measurements of non-gravitational satellite accelerations, the three months CHAMP-only solution provides the geoid and gravity with an accuracy of 20 cm and 1 mgal, respectively, at a half wavelength resolution of 550 km, which is already an improvement by a factor of two compared to any pre-CHAMP satellite-only gravity field model. This revised version was published online in August 2006 with corrections to the Cover Date.     

Electric Field Detection and Ranging of Aircraft

The electric field transported by charged aircraft during free flight can be observed quantitatively in distances of up to some 100 m. A system of three plane sensors arranged in the corners of a triangle or the Earth surface is described, by which the flight path of aircraft is detected in the range of 40 to 500 m with velocities of approximately 50 m/s. The theory and typical experimental results are discussed.     

Detection of Projectiles by Electric Field Measurements

A number of various physical mechanisms cause aircraft, missiles, and projectiles to he electrically charged during free flight. The electric charge is in the 10-6 C range for aircraft and in the 10-10 C range for projectiles. The electric field thus transported provides information by which measuring the position and velocity of a projectile is possible. A measuring device is described to determine the position of a projectile in free flight while it is passing a target plane. The electric field distribution is measured by means of three electrodes in the manner of metal plates which are positioned in the proximity of the trajectory of the projectile. A mathematical formula can be derived to describe the coherence between the values measured of the electric field strength and the coordinates of the projectile. This measuring device consists of the target plane, 1 × 1 m2 in size, and the electric device controlled by a microprocessor. The measuring system has been tested with projectiles of the 4-30 mm caliber range and at velocities within the 50-1100 m/s range. The accuracy of the coordinates measured was found to be ± 7.5 mm.     

网格密度对流场解的影响

采用不同密度的网格,利用隐式时间有限差分方法对M6机翼进行了Euler方程解算,用Richardson外插评估数值误差,就网格密度对人工耗散和解的影响进行了分析.     

提高旋转式电场仪测量电场特性的方法研究

在介绍旋转式电场仪测量电场强度的机理及测量系统构成的基础上,针对在特高压直流输电线路下地面合成电场测量中,各电场仪的输出电压与被测电场强度的特性曲线不一致,外场较恶劣测量环境对测量结果造成干扰影响测量准确度等问题,提出了相应的解决方法（特性曲线归一化处理和双路消噪差动测量法）。所述方法便于用户现场使用,提高了旋转式电场仪抗干扰能力和测量准确度。     

Density and Temperature in Wind Tunnels Using Electron Beams

In a paper presented at the last meeting of the International Congress on Instrumentation in Aerospace Simulation Facilities, a method of measuring gas density by radiation scattering was presented. Since that time, the method has been further developed using scattering of 50-keV electrons and has been applied in a wind tunnel using air as a test gas. Test section temperature and density were in the neighborhood of 150°K and 6×10-8 g/cm3. In this application, accuracies better than 1.0 percent appear to be attainable, together with excellent spatial and temporal resolution. The application is described, and comprehensive design data are presented. In addition, the density measurements have been supplemented by measurements of the local rotational temperature, utilizing nitrogen molecular band radiation excited by a second electron beam. Comparisons between the density and temperature measurements and flow properties obtained by standard gas-dynamic calculations are made.     

航空材料数据的管理与应用

飞机及发动机对航空材料提出挑战性的要求,设计师要在避免风险的同时充分利用合金、复合材料以及陶瓷等具有的特性.在这当中,对材料性能数据的采集、管理以及应用至为关键.     

某型压气机级间流场测量及数据分析

存全尺寸压气机试验台上,用球形五孔压力探针测量了低压压气机转子后的二维流场。揭示了该型压气机转子后稳态流场的特点。并提出改进方向。     

脉冲电流在塑性加工中的应用

金属材料塑性变形时通入脉冲电流,在力学性能方面:材料的流变应力下降、塑性变形能力提高,同时有助于内部裂纹的止裂甚至愈合;在微观效应方面:电流的引入可以改善组织状态,加快再结晶过程,细化晶粒。在自阻加热工艺中,电流直接对坯料加热,降低了能耗,电流加热速度快,提高成形效率。举例说明了电流在热冲压技术、轧制技术和超塑成形技术等塑性加工工艺中的应用。在节能和高效成为材料加工领域主题的今天,脉冲电流在塑性加工领域的应用可以有力地推动尖端制造业,尤其是航空航天制造产业的发展。大量研究也已证明脉冲电流在材料加工领域有着深远的研究意义和广泛的应用价值。     

基于外测弹道数据的后效误差分析及折合

本文提出了一种利用外测弹道数据特性判断后效段时间,进行后效误差分析的方法。在后效误差分析的基础上,将试验外测弹道后效段速度参数的变化量从发射坐标系转换到弹体系下,直接转化为折合弹道的速度变化量,由此可进行后效误差折合。     

月球重力场模型精度比较研究

从阶方差、谱域分析以及大地水准面自由空气重力异常3个方面分析了月球重力场模型LP150Q,LP165P与SGM150各自的特点及差异,研究结果表明,SGM150重力场在中高阶项上得到了明显改善,在远月面可以发现明显的重力异常正负交替的现象.另外,对“嫦娥二号”变轨试验期间的测轨数据进行了轨道解算和预报,比较不同重力场模型的精度影响,发现基于SGM150模型的解算结果优于基于LP150Q和LP165P的,在定轨弧段内有10m量级的精度提升,可用于高精度的月球探测器精密定轨.     

Data Association and Track Management for the Gaussian Mixture Probability Hypothesis Density Filter

The Gaussian mixture probability hypothesis density (GM-PHD) recursion is a closed-form solution to the probability hypothesis density (PHD) recursion, which was proposed for jointly estimating the time-varying number of targets and their states from a sequence of noisy measurement sets in the presence of data association uncertainty, clutter, and miss-detection. However the GM-PHD filter does not provide identities of individual target state estimates, that are needed to construct tracks of individual targets. In this paper, we propose a new multi-target tracker based on the GM-PHD filter, which gives the association amongst state estimates of targets over time and provides track labels. Various issues regarding initiating, propagating and terminating tracks are discussed. Furthermore, we also propose a technique for resolving identities of targets in close proximity, which the PHD filter is unable to do on its own.     

基于灰色理论的一种数据融合方法

在灰色关联分析的基础上,对斜关联度进行了修正,引出了点、斜修正关联度分析的概念.通过对影响目标属性识别的各种因素进行分析,结合战术思想利用灰色点、斜修正关联度分析及多目标优化方法建立了数据融合模型,提出了一种基于灰色理论的多传感器数据融合方法.计算多传感器测量数据的灰色关联矩阵,进行灰色优势分析,然后进行数据融合.此方法考虑了各传感器测量数据的精确度,而且删除掉了测量比较差或测量不到的数据.仿真结果表明,应用该方法可进一步提高多传感器的测量精度和可靠性,适用于多传感器的数据融合.     

西陵长江大桥全桥气动弹性模型风洞试验研究

介绍了西陵长江大桥成桥状态和施工状态全桥气动弹性模型在均匀平滑流和湍流两种流场中的风洞试验，评估了西陵长江大桥颤振、抖振和涡激振动等风振特性，给出了颤振风速和抖振振幅。可供研究其它大跨度桥梁的风振特性参考。     

An Estimate of Drift Effects in Various Models of the Heliospheric Magnetic Field

We use a comparison with other models to estimate how significant drifts will be in the Fisk model of the heliospheric magnetic field (HMF). We also show that drifts are still be present in an idealized field model for the period shortly after the solar polarity reversal. This revised version was published online in August 2006 with corrections to the Cover Date.     

The Electric and Magnetic Field Instrument Suite and Integrated Science (EMFISIS) on RBSP

The Electric and Magnetic Field Instrument and Integrated Science (EMFISIS) investigation on the NASA Radiation Belt Storm Probes (now named the Van Allen Probes) mission provides key wave and very low frequency magnetic field measurements to understand radiation belt acceleration, loss, and transport. The key science objectives and the contribution that EMFISIS makes to providing measurements as well as theory and modeling are described. The key components of the instruments suite, both electronics and sensors, including key functional parameters, calibration, and performance, demonstrate that EMFISIS provides the needed measurements for the science of the RBSP mission. The EMFISIS operational modes and data products, along with online availability and data tools provide the radiation belt science community with one the most complete sets of data ever collected.     

发动机加力喘振故障原因仿真分析

某型带加力涡扇发动机多次出现风扇加力喘振故障,对飞行安全和发动机寿命产生严重影响.为了分析加力喘振故障原因,首先通过发动机稳态计算模型分析了喷口控制系统稳态特性与加力喘振故障之间的关系,指出了加力工作线位置与风扇喘振的关系;其次根据基于AMESim的加力喷口控制系统模型和基于Simulink发动机分段线性化模型构建了联合仿真模型,基于联合仿真模型分析了喷口控制系统动态特性与加力喘振故障之间的关系,同时分析了喷口打开速度对于风扇喘振裕度的影响.