MBSE在航空飞行控制系统的应用研究

现代飞机系统的复杂性不断增长,传统的开发方法在管理和维护方面变得越来越具有挑战性。首先,对航空飞控系统研发过程在当前系统工程实践方面进行了评估,阐述了传统开发方式的不足和基于模型的系统工程（MBSE）的核心原则和优点,以及在实现中常用的工具和方法;然后,展示了MBSE如何在飞行控制系统研发时使用模型来支持复杂系统的规范、设计、分析、验证和确认的过程;最后,结合先进的MBSE工具和方法的发展,MBSE结合敏捷的开发前景,以及提高MBSE实践的互操作性和标准化的需求对未来的研究方向进行了展望。本文研究为利用MBSE方法论和工具来改进飞行控制系统的设计、开发和性能感兴趣的航空工业专业人员、系统工程师提供资源和解决思路。     

国产民用飞机系统和成品的维修改革

 本文简要分析了国产民用飞机维修现状,根据国内外民航部门的先进维修经验提出了国产民用飞机系统和成品（以下简称民用飞机产品）的维修改革方案。     

对海作战无人机指挥控制系统发展综述

首先对国外无人机指挥控制系统的发展现状、趋势进行了分析,引出我国对海作战无人机指挥控制系统产品谱系、技术领域发展路线的研究需求,还分析了我国对海作战无人机的作战需求和部署模式,得出不同形态控制站的发展思路和技术路线,同时结合美军无人机指挥控制系统核心能力发展情况,提出我国对海作战无人机指挥控制系统重点技术发展规划,为我国对海作战先进无人机指挥控制装备的研发进行探索。     

Confluence of navigation, communication, and control in distributedspacecraft systems

This research details the development of technologies and methodologies that enable distributed spacecraft systems by supporting integrated navigation, communication, and control. Operating at the confluence of these critical functions produces capabilities needed to realize the promise of distributed spacecraft systems, including improved performance and robustness relative to monolithic space systems. Navigation supports science data association and data alignment for distributed aperture sensing, multipoint observation, and co-observation of target regions. Communication enables autonomous distributed science data processing and information exchange among space assets. Both navigation and communication provide essential input to control methods for coordinating distributed autonomous assets at the interspacecraft system level and the intraspacecraft affector subsystem level. A technology solution to implement these capabilities, the Crosslink Transceiver, is also described. The Crosslink Transceiver provides navigation and communication capability that can be integrated into a developing autonomous command and control methodology for distributed spacecraft systems. A small satellite implementation of the Crosslink Transceiver design is detailed and its ability to support broad distributed spacecraft mission classes is described     

Electronic prototyping

Progress in automation will require the ability to electrically represent, reason about, and manipulate objects. The author examines the issues involved with electronic prototyping from the point of view of a computer scientist and discusses the development of representations, languages, editors, and model-driven simulation systems needed to support it. In particular, he identifies areas where basic research is needed before further progress can be made     

新形势下航天测控系统建设转型思考

针对航天测控系统建设目前所面临的角色定位转换、功能体制转型,以及任务要求不断提高、测控技术快速发展等新形势和新要求,分析了航天测控系统的建设管理和功能体制现状,提出了坚持一体规划、推动系统建设,坚持与时俱进、提升建设标准,坚持信息主导、突出建设重点的系统建设转型思路.并在此建设思路的基础上,提出了装备研制向型谱化、标准化转型,维修保障向全寿命、体制化转型,软件开发向产品化、装备化转型,以及推进一体化网络化、强化综合能力、重视安全性可靠性等建设举措.     

Multimode GaAs Chip-Set for New S-Band Satellite TT&C Transponders

This paper presents a production-oriented chip-set to be used as the circuitry needed to implement the necessary RF functionalities of a new generation of S-band satellite transponders for telemetry tacking and control (TT&C) applications. The RF hardware section integration is achieved by means of a customized chip-set of just four multi-chip multifunction MMIC (MCMM) modules. The functions contained in the monolithic microwave integrated circuits (MMICs) include the active circuits needed for the front-end low noise amplifier (LNA), the RF and IF converters, all the variable gain amplifiers (VGAs), the Voltage Controlled Oscillator (VCO) for both transmit and receive sections, the frequency prescaler and multiplier needed to synthesize the frequency plan as well as the Local Oscillator (LO) amplifiers. The selected technology is GaAs, mainly due to its radiation hardness, essential for aerospace applications, and good reliability. Issues such as suitable circuit topology, efficient dc biasing, circuit area minimization, cost-oriented system design and advanced packaging techniques have been addressed during the design. Measurements and yield results from the manufactured circuits will be presented showing that these components, even though especially designed in the frame of the GALILEO TT&C transponder predevelopment, are suitable for a variety of missions, from Deep space to near Earth, including spread-spectrum transponders with precision ranging function.     

Aircraft flight control system design under state and controlbounds

Sophisticated control configurations are needed to meet the mission and pilotage requirements for advanced aircraft. The required vehicle performance during low altitude, low speed and high angle of attack flight, all-weather, day and night operations must be achieved, and new control technologies should be developed. This work presents a systematic control design philosophy for flight control systems when the state variables and control inputs are bounded by the prespecified constraints. The design procedure uses the dynamic programming concept. The fundamental idea involves minimization of nonquadratic functionals. A new representation of constraints is proposed using the smooth functions. The advantages of the synthesis approach are presented. To illustrate the design methodology the longitudinal control configuration for the F-18 fighter is synthesized     

A Digital Map Set for the Night Attack Aircraft

There has been much interest recently in applying cartographic digital data bases to advanced avionics systems as a solution to specific problems associated with night attack aircraft missions. The tremendous computer horsepower required to accomplish this task in real-time in an airborne environment is well documented. Hardware implementation of complex algorithms traditionally has produced custom devices which accomplish a specific function on a specific data structure. Historically, this has resulted in powerful but inflexible systems incapable of adapting to the changing requirements of military missions. In an age of evolving technology, these pitfalls must be avoided by incorporating expected changes into the design of digital map systems. If they are made to accommodate a variety of cartographic data bases and allow for programmable manipulation of those bases, this new class of digital map sets can be reconfigured at the software level to meet the changing requirements of aircraft missions. This paper addresses current design concepts for such a map system on a Night Attack aircraft. The focus is on issues concerning the development and handling of existing map data products to meet current system requirements. This system, called the Digital Map Set (DMS), is being designed to accomplish the classical manipulations of Defense Mapping Agency Digital Land Mass System data. Additionally, aeronautical charts, aerial reconnaissance photos, flight plan data, and other two-dimensional bit mapped graphics also are accommodated. Mission requirements relating to the cartographic data bases shall be discussed along with ground support station and airborne system design issues.     

航空生产计划系统的模糊仿真

 飞机制造过程通常比较复杂，仿真模型可以帮助工程技术人员理解这一复杂的过程和找出系统中的瓶颈。用高级仿真技术和模糊方法于某航空企业的生产计划系统，建立模糊仿真模型和软件系统，研究生产计划的可行性，以满足生产管理的需要。     

The Digital Information Facility

The acceptance and implementation of advanced digital avionics and flight control systems is dependent on the successful integration of these systems into the current and future National Airspace System (NAS). This paper describes a digital avionics systems research facility known as the Digital Information Facility (DIF) developed to provide researchers with the ground systems and air-to-ground interfaces needed to conduct and document experiments involving a mix of new technologies within the existing NAS infrastructure. The DIF supports four NAS functions: Controller Pilot Data Link Communications (CPDLC), Flight Information Services (FIS), Differential Global Positioning System (DGPS) navigation, and Automatic Dependent Surveillance-Broadcast (ADS-B). The DIF also includes the capability to record pilot and air traffic management interactions and document research participant observations. The DIF capability includes connectivity to flight test and simulated aircraft in a fully immersive Communications, Navigation, and Surveillance (CNS) environment.     

先进重构飞行控制技术和方法研究

重构飞行控制技术本质上是一种容错飞行控制技术，它使飞控系统具有适应未知故障和损伤的能力，从而可以有效地提高安全性和任务效能。先进重构飞行控制技术在原有的基础上更加强调自适应的能力，而不再依赖故障诊断和隔离（FDI）系统，因而促进了鲁棒控制、智能控制和逢适应控制技术在该领域的交叉和融合。首先回顾了重构飞行控制技术的发展现状，然后给出了几种先进重构控制方法，并总结了先进重构飞行控制技术的主要技术优势，最后展望了它的发展趋势和应用前景。     

Integrated flight/fire control for attack helicopters

It is shown that integrated flight and fire control modes, analogous to those used in fixed-wing applications, can be implemented to enhance an attack helicopter's air-to-air and air-to-ground combat effectiveness. With fly-by-wire active flight controls and state-of-the-art technology in target acquisition and tracking, integrated flight/fire control can increase firing opportunities, improve weapon accuracy and enhance survivability. Two typical applications are illustrated, using detailed simulations of the fly-by-wire controlled helicopter and associated weapons systems. The avionics architecture needed to implement an integrated system is described, and it is shown that it is achievable with straightforward extensions of designs already in place for advanced versions of the AH-64 aircraft     

Topical problems of corporative control in aircraft manufacturing

In this paper, the necessity for applying the corporative methods and tools of control over the processes of development, production, and realization of aircraft engineering articles is substantiated. The general structure of aircraft-manufacturing corporation is presented. Some problems of constructing the most advanced computer-aided corporative systems of control in aircraft manufacturing are discussed.     

基于SFA的研制阶段装备保障方案评价模型

针对目前研制阶段装备保障方案评价在角度和方法上的不足,提出基于随机前沿分析(SFA)的评价模型。首先,分析提炼保障系统的特性,在此基础上,建立保障系统的特性评价参数,然后构建基于SFA的评价模型,通过计算保障方案的效率指数进行保障方案的评价,实现了保障方案的排序,以及评价指标的灵敏度分析。最后,结合研制阶段某型号飞机保障方案给出评价示例,并与数据包络分析(DEA)评价结果进行对比分析,评价结果具有较高的一致性,从而验证了该模型的可行性和有效性,可为研制方在研制阶段保障方案的评价决策和改进设计提供有效的技术支持。     

适用于机载飞控系统的操作系统选型研究

新型机载飞控软件综合了更多的应用功能,需配备合适的操作系统作为基础.根据新型机载飞控软件开发需求,对操作系统和配套开发工具的要求进行讨论,形成相应的评估表.同时对国内外在飞控上有应用的4个操作系统进行分析评估,选出最适合目标机载飞控软件的操作系统.     

航空发动机工作分解结构（WBS）构建方法

针对航空发动机研发项目技术高、周期长、投入大的特点,提出了1种面向全生命周期产品研制的航空发动机工作分解结构构建方法。该方法依据系统工程的理念,充分考虑了航空发动机研究所的管理模式特点,给出了航空发动机工作分解结构的构建原则、架构、工作类型和单元说明等相关内容。通过在实际发动机研制项目中的应用,证明该方法合理、有效,提高了工作分解的完整性、合理性,增强了计划管理的可执行性,能够为项目管理提供相应的信息支撑。     

Wireless power transmission: the key to solar power satellites

Maturing of the enabling technologies has provided much of the infrastructure to support the development of a commercial Solar Power Satellite program. Solar Space Industries was formed to accomplish this goal. The basis of their development plan is to build a Ground Test Installation that will duplicate, in small scale on the Earth, all aspects of the power generating and power transmission systems except for the space environment and the range and size of the energy beam. Space operations issues will be separated from the power generation fixation and verified by testing. Doing the developmental testing on the ground instead of in space will result in a low cost program that can be accomplished in a very short time. The concept is to build a Ground Test Installation that couples an existing 100 kW terrestrial solar cell array to a phased-array wireless power transmitter based on a subarray. Power will be transmitted over a 1-¼ mile range to a receiving antenna and then fed into a commercial utility power grid. The objective is to demonstrate the complete function of the Solar Power Satellites, with the primary issue being the validation of practical wireless power transmission. The key features to demonstrate are: beam control, stability, steering, efficiency, reliability, cost, and safety     

美国航空预研计划及其管理

首先根据世界航空工业发展形势，以美国近期的十二项典型重大航空预研计划为例，叙述其预研计划所包括的内容及执行效果，最后，透过所述的预研计划，分析了美国航空预研计划及其管理的特点，并对我国航空技术预研工作提出几点建议。     

卫星与地面测控系统协调设计研究

卫星运行需要地面测控系统的支持.通过对某些卫星运行与地面测控系统支持方面的实际分析,总结其设计研制和协调中不足,研究卫星系统与地面测控系统的协调设计,并提出相应建议,为我国的卫星发展作一些借鉴.