Nullifying ACF grating lobes in stepped-frequency train of LFM pulses

An effective way to increase the bandwidth of a coherent pulse-train is to add a frequency step /spl Delta/f between consecutive pulses. A large /spl Delta/f implies a large total bandwidth, hence improved range resolution. However, when the product of the frequency step times the pulse-duration t/sub p/, is larger than one (t/sub p/ /spl Delta/f > 1), the autocorrelation function (ACF) of the stepped-frequency pulse-train suffers from ambiguous peaks, known as "grating lobes." It is well known that replacing the fixed-frequency pulses with linear FM (LFM) pulses of bandwidth B can reduce those grating lobes. We present a simple analytic expression for the ambiguity function (AF) and ACF of such a signal and derive from it very simple relationships between /spl Delta/f, B, and t/sub p/ that will place s exactly where the grating lobes are located, and thus remove them completely.     

Explicit formulas for two state Kalman, H/sub 2/ and H/sub /spl infin// target tracking filters

The continuous time, two state, target tracking problem is considered from the Kalman, H/sub 2/, and H/sub /spl infin// filter viewpoint. While previous treatments were numerical in nature, analytic transient responses and infinite horizon solutions with analytic performance expressions are presented here. Tracking indices, involving the maneuver and measurement uncertainties, are shown to have a role for both the steady state and transient responses. In addition, the H/sub /spl infin// tracker has a sensor index involving the performance bound and measurement uncertainty, which, along with the tracking index, plays a significant role in the H/sub /spl infin// tracker expressions. Analytical expressions for the probability of target escape, the probability that the target position will be outside the radar beamwidth (BW), are developed not only to compare the performance of various trackers, but also as a design tool to meet tracking specifications. Examples illustrate the performance of the target trackers as a function of the error gain upper bound.     

Reduced-order H/sub /spl infin// and L/sub 2/-L/sub /spl infin// filtering via linear matrix inequalities

Necessary and sufficient conditions are derived for the existence of a solution to the continuous-time and discrete-time reduced-order H/sub /spl infin// and L/sub 2/-L/sub /spl infin// filtering problems. These conditions are expressed in terms of linear matrix inequalities (LMIs) and a coupling nonconvex matrix rank constraint. Convex LMI problems are obtained for the full-order and the zeroth-order filtering. An explicit parametrization of all reduced-order filters that correspond to a feasible solution is derived in terms of a contractive matrix, and iterative algorithms are proposed to solve the reduced-order filtering problems using alternating projections.     

Development of three-phase switch-mode rectifier using single-phase modules

This paper presents a three-phase (3/spl phi/) switch-mode rectifier (SMR) consisting of three 1 /spl phi/ SMRs, two center-tapped autotransformers and three changeover switches. The ac input sides of three modules are /spl Delta/-connected, and their dc output sides are connected in parallel. As any one module fault occurs, the remaining two modules becomes modified T-connected and continuously perform three-phase rectification with good line drawn power quality. When two constituted 1/spl phi/ modules are faulted, the proposed 3/spl phi/ SMR will be operated as 1/spl phi/ SMR. The quantitative and robust voltage regulation controls for the developed SMR are made to consider the effects of changes of system parameters, operating condition, and number of connected modules.     

Mixed H/sub 2//H/sub /spl infin// filtering for uncertain systems with regional pole assignment

The mixed H/sub 2//H/sub /spl infin// filtering problem for uncertain linear continuous-time systems with regional pole assignment is considered. The purpose of the problem is to design an uncertainty-independent filter such that, for all admissible parameter uncertainties, the following filtering requirements are simultaneously satisfied: 1) the filtering process is asymptotically stable; 2) the poles of the filtering matrix are located inside a prescribed region that compasses the vertical strips, horizontal strips, disks, or conic sectors; 3) both the H/sub 2/ norm and the H/sub /spl infin// norm on the respective transfer functions are not more than the specified upper bound constraints. We establish a general framework to solve the addressed multiobjective filtering problem completely. In particular, we derive necessary and sufficient conditions for the solvability of the problem in terms of a set of feasible linear matrix inequalities (LMIs). An illustrative example is given to illustrate the design procedures and performances of the proposed method.     

Robust neuro-H/sub /spl infin// controller design for aircraft auto-landing

A robust neuro-control scheme is presented for aircraft auto-landing under severe wind conditions and partial loss of control surfaces. In the scheme, a dynamic radial basis function network (RBFN) called minimal resource allocating network (MRAN), that incorporates a growing and pruning strategy, is utilize to aid an H/sub /spl infin// controller using a feedback-error-learning mechanism. The neural network uses only online learning and is not trained "a priori". Specifically, the performance of this neuro-controller for aircraft auto-landing in a microburst along with a partial loss of control effectiveness is analyzed and compared with other control schemes. Simulation studies show that the performance obtained by the neuro-H/sub /spl infin// control scheme is better than the other control schemes under failure and extreme wind conditions.     

Sigma-mean monitoring for the local area augmentation of GPS

The local area augmentation system (LAAS) is a ground-based differential GPS system being developed to support aircraft precision approach and landing navigation with guaranteed integrity. To quantitatively appraise navigation integrity, an aircraft computes vertical and lateral protection levels using the standard deviation of pseudo-range correction errors, /spl sigma//sub pr/spl I.bar/gnd/, broadcast by the LAAS ground facility (LGF). Thus, one significant integrity risk is that the true standard deviation (sigma) of the pseudo-range correction error distribution may grow to exceed the broadcast correction error sigma or that the true mean of the correction error distribution becomes excessive during LAAS operation. This event may occur due to unexpected anomalies of GPS measurements. To insure that the true error distribution is bounded by a zero-mean Gaussian distribution with the broadcast sigma value, real-time sigma and mean monitoring is necessary. Both direct estimation and cumulative sum (CUSUM) methods are useful to detect violations with acceptable residual integrity risk. For sigma monitoring, the estimation method more rapidly detects small violations of /spl sigma//sub pr/spl I.bar/gnd/ but the fast initial response (FIR) CUSUM variant more promptly detects significant violations that would pose a larger threat to user integrity. For the purposes of mean monitoring, the FIR CUSUM variant is superior to the estimation method in detecting any mean violations. The results demonstrate that real-time protection is achievable against all sizes of sigma/mean failures that can threaten navigation integrity.     

Performance characteristics of lithium ion cells at low temperatures

The low temperature charge and discharge characteristics of experimental MCMB-Li/sub x/Ni/sub y/Co/sub 1-y/O/sub 2/ cells containing different electrolytes were investigated. The use of low ethylene carbonate (EC)-content electrolyte formulations has resulted in good discharge performance to temperatures as low as -40/spl deg/C. The effect of charge voltage and charge current upon the individual electrode potentials at low temperature was investigated using the three electrode cells (containing lithium reference electrodes). In some cases, lithium plating was observed to occur upon low temperature charge, and found to be facilitated by high charge voltages, high charge currents, and poor anode kinetics. Electrochemical characterization of the cells has helped to establish the conditions under which lithium plating can occur by providing information regarding the polarization effects present at each electrode.     

Theorem for the combination of bistatic radar measurements using least squares

In order to improve position finding performance, least squares method is often used to combine the measurement sets of bistatic radar system. However, which measurement sets can be combined by least squares method and which cannot have received little attention until now. We address this issue based on 2 measurements of bistatic radar system, for example (/spl rho/, /spl theta//sub T/), and present a new theorem, with proof, which shows that the least squares estimator can be obtained by combining any two measurement sets if these measurement pairs are disjoint. We provide an example that satisfies this condition, which shows that the least square combination of measurement sets yield improved performance especially in the vicinity of the transmitter and the receiver.     

Ultrawideband radar special features & terminology

UWB radar has evolved in the fifteen years since DARPA proposed the present frequency-based definition. We suggest the UWB radar definition should reflect the physical features and practical applications. We propose a revised definition: an ultra wideband radar is a radar set which has a range resolution (/spl Delta/r) much smaller than the target length L along the radiated direction.     

Nonlinear robust observer design for strapdown INS in-flight alignment

A nonlinear observer is proposed for a strapdown inertial navigation system (SDINS) in-flight alignment problem using an H/sub /spl infin// filter Riccati equation and a freedom parameter. The proposed observer improves the filtering stability, convergence, and performance. The characteristics of the observer are analyzed using a Lyapunov function. Simulation results demonstrate a significant reduction in alignment errors by employing the proposed nonlinear observer. The observer is developed in general such that it can be applied to estimating nonlinear systems other than the SDINS in-flight alignment.     

Robust H/sub /spl infin// filtering of fuzzy dynamic systems

Robust H/sub /spl infin// filtering of complex nonlinear systems which can be represented by a fuzzy dynamic model is presented. Based on a nominal model, a common positive definite matrix P, and a piecewise continuous Lyapunov function respectively, three kinds of new filtering design methods are proposed using quadratic stability theory and linear matrix inequalities (LMIs). It is shown that the filtering system is quadratically stable with disturbance attenuation if there exists a positive definite matrix solution to a LMI or a set of LMIs. An example is also given to demonstrate the performance of the proposed filtering design methods.     

Design of Optimal Radar Signals Subject to a Fixed Amplitude Constraint

The problem of designing finite-pulse-train radar signals and receivers to maximize the detectability of targets masked by thermal noise and clutter returns is considered in this paper. A practical constraint is introduced: the amplitude of each subpulse in the transmit waveform is taken to be fixed. The need for such a constraint is dictated in most radar applications, because the transmitter is most efficiently utilized by saturating its amplifying tube. An algorithm for generating optimal waveforms subject to this new constraint is presented, and the performance of the resulting waveforms is compared with those obtained using existing optimization techniques.     

The Effect of Satellite Spin on Two-Way Doppler Rangerate Measurements

The rotation of a spin-stabilized satellite employing a turnstile antenna for reception and retransmission affects two-way Doppler range-rate measurements. Two different types of tracking systems are considered and, in both systems, the range-rate measurement is changed by the amount begin{equation*} |Delta dot{r}| = frac{|1 pm 1/k|}{2} lambda_{t}f_{s} end{equation*} where k is the turn-around ratio of the satellite transponder, Xt is the wavelength of the ground-based transmitter, and fs is the spin rate of the satellite. The positive sign is used if the turnstile antenna elements are connected to give the same polarization for both reception and transmission. If the antenna connections result in different polarizations, the minus sign is used and the magnitude of the effect is reduced.     

An alternative to traditional software rehosting

This paper describes one alternative to rehosting TPS software to newer computer platforms. It describes the solution that Southwest Research Institute (SwRI) used to solve a problem with re-engineering legacy software into a modern object-oriented language. The advantages gained by this method are more advanced instruction to the operator (such as pictures and movies), flexible reporting scheme to diagnose system problems, and ease of software maintenance. This solution uses commercially available products including National Instruments/spl trade/ TestStand/spl trade/ and LabVIEW/spl trade/ and Microsoft/spl reg/ Visual Basic/spl reg/. The system is a four-tiered architecture to drive all test execution. The user interface is written in Visual Basic and allows the user to interact with the test execution when needed. This user interface in turn calls tests that are written in TestStand, and finally the individual tests call driver functions written in LabVIEW. A database serves as a repository for all test results, displays, and test limits. The use of this database allows for easy querying of measurement data to analyze trends in failures that help diagnose specific problems. By using this database, all test limits and test displays are contained in one central location that enables engineers to change these displays and limits on the fly without needing to change or even understand any test code. One other benefit of this data containment is that all Government classified data is separated out of the code and stored as one file, instead of in various locations as it was in the original source code.     

PCM/FM aeronautical telemetry in frequency selective multipath interference

The performance of PCM/FM using a delay-line detector in multipath interference is analyzed. In aeronautical telemetry applications, the multipath interference causes a in the signal spectrum which is web modeled by a channel composed of a line-of-sight signal and a strong specular reflection with magnitude /spl Gamma/ and excess delay less than a bit time. Analysis shows that the bit error probability is strongly dependent on the location of the within the spectrum. The bit error probability averaged over the location is also analyzed. For the case of no predetection filtering, the average bit error probability is dependent on the depth of the but not on the width. The loss in performance (relative to the AWGN environment) is bounded by (1-/spl Gamma/)/sup -2/ which is the depth of the . For the case of predetection filtering, the average bit error probability is dependent on both the width and depth of the . The performance loss is bounded by (1-/spl Gamma/)/sup -2/spl Gamma// which is less than that for the case of no predetection filtering.     

Discrete-time min-max tracking

The problem of optimal state estimation of linear discrete-time systems with measured outputs that are corrupted by additive white noise is addressed. Such estimation is often encountered in problems of target tracking where the target dynamics is driven by finite energy signals, whereas the measurement noise is approximated by white noise. The relevant cost function for such tracking problems is the expected value of the standard H/sub /spl infin// performance index, with respect to the measurement noise statistics. The estimator, serving as a tracking filter, tries to minimize the mean-square estimation error, and the exogenous disturbance, which may represent the target maneuvers, tries to maximize this error while being penalized for its energy. The solution, which is obtained by completing the cost function to squares, is shown to satisfy also the matrix version of the maximum principle. The solution is derived in terms of two coupled Riccati difference equations from which the filter gains are derived. In the case where an infinite penalty is imposed on the energy of the exogenous disturbance, the celebrated discrete-time Kalman filter is recovered. A local iterations scheme which is based on linear matrix inequalities is proposed to solve these equations. An illustrative example is given where the velocity of a maneuvering target has to be estimated utilizing noisy measurements of the target position.     

Suitability of pulse train control technique for BIFRED converter

Pulse Train/spl trade/ control scheme is presented and applied to a boost integrated flyback rectifier/energy storage dc-dc (BIFRED) converter operating in discontinuous conduction mode (DCM), which avoids the light-load high-voltage stress problem. In contrast to the conventional control techniques, the principal idea of Pulse Train technique is to regulate the output voltage using a series of high and low energy pulses generated by the current of the inductor. The applicability of the proposed technique to both the input and magnetizing inductances of BIFRED converter is investigated. Analysis of BIFRED converter operating in DCM as well as the output voltage ripple estimation is given. Experimental results on a prototype converter are also presented.     

Brightness-independent start-up routine for star trackers

Initial attitude acquisition by a modern star tracker is investigated here. Criteria for efficient organization of the on-board database are discussed with reference to a brightness-independent initial acquisition algorithm. Star catalog generation preprocessing is described, with emphasis on the identification of minimum star brightness for detection by a sensor based on a charge coupled device (CCD) photodetector. This is a crucial step for proper evaluation of the attainable sky coverage when selecting the stars to be included in the on-board catalog. Test results are also reported, both for reliability and accuracy, even if the former is considered to be the primary target. Probability of erroneous solution is 0.2% in the case of single runs of the procedure, while attitude determination accuracy is in the order of 0.02/spl deg/ in the average for the computation of the inertial pointing of the boresight axis.