基于频谱和倒谱分析的探地雷达地杂波抑制

超宽带探地雷达被广泛用于检测浅层埋藏的反人员地雷,其中滤除强的地表反射回波是完成目标检测、成像与识别的关键。将独立分量分析算法与数据非一致性检测方法相结合,通过分析独立分量的频谱和倒谱,给出了一种可以适应多目标数据区域且自动选取独立分量的地杂波抑制方法。实验结果证明了该方法的可行性和有效性。     

Strategy of GPR Searching for Low Radar Contrast Plastic Pipes in Ground

The results of computer simulation of pulse signal scattering by a plastic pipe buried in the ground as well as simulation results of Ground Penetrating Radar (GPR) image of ground-filled trenches have been represented in the work. The "skeleton diagram" of a trench image has been developed. The strategy of GPR searching for low radar contrast plastic pipes in ground (in back-filled trenches) has been considered on the basis of indirect criterion which is the existence of a trench containing buried pipes.     

Buried small objects detected by UWB GPR

A ground penetrating radar (GPR) using short-pulse is developed to detect small and shallow metal objects buried underground. A bistatic mode in which the GPR system uses separate transmitting and receiving antennas is applied. A modified fat dipole antenna is developed for the transmitting and receiving antennas. The prototype of the system is tested in the real environment and 2D visualization of raw data is achieved. We show that the developed system has a good ability to detect underground metal objects, and even small targets of several centimeters.     

Performance of an adaptive feature-based processor for a wideband ground penetrating radar system

A two-stage algorithm for landmine detection with a ground penetrating radar (GPR) system is described. First, 3-D data sets are processed using a computationally inexpensive pre-screening algorithm which flags potential locations of interest. These flagged locations are then passed to a feature-based processor which further discriminates target-like anomalies from naturally occurring clutter. Current field trial (over 6500 square meters) and blind test results (over 39000 square meters) are presented and these show at least an order of magnitude improvement over other radar system-based detection algorithms on the same test lanes.     

Evaluation of EarthRadar unexploded ordnance testing at Fort A.P.Hill, Virginia

Previously, K. Bakhtar and E. Sagal [ibid. vol. 17, pp. 4-11, 2002] made remarkable claims for the performance of the Bakhtar Associates ground-penetrating radar (GPR) in detecting and classifying buried unexploded ordnance (UXO). In this article, we report the results of the series of blind tests on the EarthRadar carried out during the Fall of 2000 and Spring of 2001, which led to very different conclusions regarding the radar's performance. The contents of this article are excerpted from the final report on the testing, prepared by the Institute for Defense Analyses     

Ground probing radar system

Two types of battery-powered, compact, ground probing radar (GPR) systems have been developed. The systems have CRT displays mounted on antenna units and are used to locate such underground objects as gas pipes, water pipes, and transmission cables. The performance of the systems and results of field tests are reported. The GPR detected 59 of 64 underground gas pipes; a 200-mm-diameter pipe is clearly detected at a depth of 2.3 m     

单脉冲双极化天线阵列设计

文章研究了单脉冲双极化天线阵列。天线阵混合馈电微带单元由共面微带线馈电和缝隙耦合微带线馈电两者结合形成,"十"字形微带单脉冲比较器与天线阵同面,具有结构紧凑、加工方便和成本低的优点。经仿真验证,在工作频带内其辐射单元双端口隔离度高于34dB;并且2个极化端口在其对应主平面方向的副瓣电平均低于-20dB。天线可适用于新一代多极化雷达系统。     

Ground penetrating radar VIY-2

VIY-2 ground penetrating radar (GPR) with unique sounding possibilities and use simplicity is presented at this paper. VIY-2 GPR combines all units (synchronizer, transmitting and receiving modules, powering, and antenna system) into single case. The VIY-2 GPR communicates with computer via standard interface RS232 or USB1.0. Technical solutions utilized by the VIY-2 GPR reduce deployment time and simplify surveying process. The VIY-2 GPR design features and its components interaction are considered at this paper. Some field results are also presented here. The VIY-2 GPR design concept allows reducing the data acquisition time,, optimizing the time-varying gain control function, applying depth-stacking dependence, controlling the surveying window position and interference reducing by pulse repetition frequency randomizing.     

Propagation velocity uncertainty on GPR SAR processing

To detect buried landmines, Planning Systems Incorporated (PSI) has developed a ground-penetrating synthetic aperture radar (GPSAR) system. Since the electromagnetic wave propagation velocity in the soil depends on many factors, velocity uncertainty is inevitable. However, we have observed that, unlike conventional airborne/spaceborne synthetic aperture radar (SAR) systems, the PSI GPSAR system is very robust against the velocity uncertainty under mild conditions. Theoretical analysis is provided to explain this observation. Although our discussion is based on the PSI GPSAR system, it applies to other GPR-based (ground-penetrating radar) landmine detection systems as well.     

Analysis and results of the 1995 Yuma ground penetration SARmeasurements

In July and October 1995, a large-scale airborne SAR experiment was conducted in the Yuma Proving Ground, Yuma, Arizona, to investigate ground penetration radar phenomenology and buried target detection. This paper describes the Yuma experiment and measurement results for many tactical, utility, and environmental targets deployed in the test     

CCRS C/X-airborne synthetic aperture radar: An Rand D tool for the ERS-1 time frame

The airborne synthetic-aperture radar (SAR) system developed for the Canada Centre for Remote Sensing (CCRS) is described. It consists of two radars, at C-band and X-band. Each radar incorporates the following features: dual-channel receivers and dual-polarized antennas; a high quality, 7-look, real-time processor; a sensitivity time control for range-dependent gain control; a motion-compensation system for antenna steering in azimuth and elevation; and baseband I and Q signal phase rotation. The system also uses a high-power transmitter with a low-power back-up. The SAR maps to either side of the aircraft, at high or low resolution, at incidence angles which in high resolution span 0° to 80°. Radar operating parameters, data products, key specifications and the motion compensation scheme used are presented. Properties of the real-time imagery are discussed and examples of C-band SAR data in the three operating modes are given     

Design and applications of airborne radars in the VHF/UHF band

The simultaneous need for ground penetration and high resolution dictates the use of frequencies less than 500 MHz for imaging ground penetrating radar (GPR) designs. It is possible to build such systems with good performance and yet not interfere with ground installations operating in the same bands. The total number of airborne GPR systems needed to saturate the market is small, (possibly less than ten), and so the buildup of noise in this spectral region occupied by these radars will be negligible. This is fortunate, since there is a clear need for such radars in such areas as humanitarian demining and unexploded ordnance (UXO) mapping. Some formal set of guidelines is needed beyond that given in Part 15 of the FCC regulations, which both recognizes the need for airborne UWB radar operations, and still protects licensed users in the band     

Adaptive learning approach to landmine detection

We consider landmine detection using forward-looking ground penetrating radar (FLGPR). The two main challenging tasks include extracting intricate structures of target signals and adapting a classifier to the surrounding environment through learning. Through the time-frequency (TF) analysis, we find that the most discriminant information is TF localized. This observation motivates us to use the over-complete wavelet packet transform (WPT) to sparsely represent signals with the discriminant information encoded into several bases. Then the sequential floating forward selection method is used to extract these components and thereby a neural network (NNW) classifier is designed. To further improve the classification performance and deal with the problem of detecting mines in an unconstraint environment, the AdaBoost algorithm is used. We integrate the feature selection process into the original AdaBoost algorithm. In each iteration, AdaBoost identifies the hard-to-learn examples and a new set of features which provide the specific discriminant information for these hard samples is extracted adaptively and a new classifier is trained. Experimental results based on measured data are presented, showing that a significant improvement on the classification performance can be achieved.     

A novel target detection approach based on adaptive radar waveform design

To resolve problems of complicated clutter, fast-varying scenes, and low signal-clutterratio (SCR) in application of target detection on sea for space-based radar (SBR), a target detection approach based on adaptive waveform design is proposed in this paper. Firstly, complicated sea clutter is modeled as compound Gaussian process, and a target is modeled as some scatterers with Gaussian reflectivity. Secondly, every dwell duration of radar is divided into several sub-dwells. Regular linear frequency modulated pulses are transmitted at Sub-dwell 1, and the received signal at this sub-dwell is used to estimate clutter covariance matrices and pre-detection. Estimated matrices are updated at every following sub-dwell by multiple particle filtering to cope with fast-varying clutter scenes of SBR. Furthermore, waveform of every following sub-dwell is designed adaptively according to mean square optimization technique. Finally, principal component analysis and generalized likelihood ratio test is used for mitigation of colored interference and property of constant false alarm rate, respectively. Simulation results show that, considering configuration of SBR and condition of complicated clutter, 9 dB is reduced for SCR which reliable detection requires by this target detection approach. Therefore, the work in this paper can markedly improve radar detection performance for weak targets.     

Calculation of Probability of Detection with Target Scintillation

This paper presents a computational method for the calculation of probability of detection using measured radar target cross-section data. The described method can also be used for probability of detection calculations when the radar target cross section follows a specified probability density function. Using the computational procedure of the paper, a number of curves are generated which can be used for probability of detection calculations with exponential and Gaussian radar target cross-section distributions. The results obtained using theoretical distributions are compared with the corresponding results using actual target cross-section measurements. The results of computer runs are compared to the corresponding values in the literature where available.     

21世纪初军用飞行器战术技术要求的新内容——隐身能力

本文从战争的启示、系统工程分析的结论及反隐身技术的威胁等三方面,论证了“隐身能力”对未来军用飞行器的重要性。文中着重分析了21世纪初军用飞行器战术技术要求的新内容——“隐身能力”所包括的三个内容:（1）飞行器的散射特性及辐射特性;（2）飞行器的电子干扰能力;（3）飞行器所用的战术隐身技术。     

雷达检测性能试验等效推算方法

 雷达检测性能是雷达最基本、最重要的性能,雷达检测性能试验是雷达试验的重要内容。由于各种原因,针对雷达的系统级原型试验常常难以开展或者只能极少量地开展,通常只能通过进行大量等效试验来辅助雷达性能的鉴定评估工作。本文针对缺乏原型试验条件下的雷达检测性能评估问题,提出了一种基于试验数据分析的雷达检测性能等效推算方法。首先给出了等效试验与原型试验之间的差异性度量方法,它是等效推算和性能评估的基础;接着对存在原型试验条件下的等效推算方法进行了研究;而后针对通常无法进行原型试验的实际情况,提出了一种基于预测模型和仿真试验相结合的零子样原型试验条件下的等效推算方法;最后通过仿真实例验证了本文方法的合理性和可行性。     

Aircraft trajectories considering radar range constraints

The problem of finding an optimal aircraft trajectory subject to constraints defining distance of detection to hostile radar stations is considered. The purpose is to find a trajectory minimizing the flight time between two given positions without hostile radar detection. The flight path is represented using a smooth curve in the form of a spline approximation. The spline representation is used to derive the heading- and bank angles of the aircraft. The position of the aircraft together with the bank- and heading angles are used for calculations of the radar detection range. Furthermore, an example in three dimensions when a Saab 105 approaches a radar station in level flight is investigated.     

Simple Procedures for Radar Detection Calculations

The literature of radar contains results of Rice, Marcum, Swerling, and Schwartz in several families of curves, which permit radar engineersto estimate the signal energy ratio required for a given level of detectionperformance. The variety of radar problems, however, makes itimpractical to construct curves for all combinations of radar and targetparameters. The concept of detector loss is used here to evaluate lossesattributable to integration and collapsing, with an accuracy of ±0.3 dBon steady targets. This is added to a separate fluctuation loss, modifiedfor diversity effects, to obtain results on all Swerling target modelsand also on partially correlated targets. The accuracy of the combinedlosses is ±0.5 dB for a wide range of detection and false-alarm probabilities.Starting from the basic single-sample detection curves, onlythree additional graphs are needed to find the energy ratio for givendetection performance in any of these cases. Examples are given whichshow the ease with which different radar options may be compared asto performance on an arbitrary type of target.     

Beam overlap impact on phased-array target detection

The impact of beam overlap on the probability of detection during a single scan of a phased-array volumetric scan radar is examined. Rectangular and triangular beam packing arrangements are considered. Beam positions near the beam most centered on the target are allowed to contribute to the detection process. The treatment of the impact of beam overlap on target detection for a phased array is consistent with the results that would be achieved by proper use of the search radar range equation