共查询到20条相似文献,搜索用时 125 毫秒
1.
Q表石英摆片加工工艺本工艺包括用超声波机床将石英玻璃落料成形,经研磨和镜面抛光制出基片,再经化学腐蚀加工出柔性梁、CO2激光加工中心孔和修梁、基片真空镀制AuCr电极,最后光纤分档测试装表。本工艺难度大,乃多项高新技术与工艺技术的复合。其中超声波整体... 相似文献
2.
3.
激光切割技术的应用可有效提高产品的切削质量,提高生产效率,降低运营成本。但是不同材料在切割过程中显示出了不同的物理特性,铝合金材料作为高反射金属,切削过程可能会带来较大的热影响,从而影响铝合金材料的性能。为了减少激光切割对铝合金材料性能的影响,让激光切割技术在铝合金钣金成形领域得到广泛应用,提出了将激光切割工艺参数标准化的方法,即采用正交试验法设定不同的激光切割工艺参数组合,对不同种类的铝合金材料进行切割,并进行动静力学、耐腐蚀性、金相性能试验等,使用灰色关联度法分析影响铝合金材料性能的主要因素,固化激光切割工艺参数组合,从而使参数组合标准化。 相似文献
4.
5.
6.
7.
8.
9.
10.
提出用激光能量密度描述激光加工工艺参数之间的耦合作用对板料弯曲角度的影响,通过试验研究了激光能量密度对板料弯曲角度的影响规律,并得出输出功率对其影响最大的结论。激光加工技术是先进、高效的制造手段,在航空、机械及国防工业等部门已经或有望得到广泛的应用。激光切割、焊接、表面改性处理、激光原型加工等方法已为人们所熟悉,而极料激光成形技术则处在起步阶段。它是一种利用激光扫描金属薄板,在作用区厚向瞬间产生强烈非均匀的温度场和热应力场,致使极料发生塑性弯曲变形的新型无模具成形方法,是激光非熔凝热加工方法的一… 相似文献
11.
12.
13.
采用石英挠性加速度计作为重力敏感器的航空/海洋重力仪是典型的重力信息采集仪器,要求石英挠性加速度计具有一次通电稳定性高、高分辨率、低噪声的特点。为了满足航空/海洋重力仪需求,首先,分析了石英挠性加速度计一次通电稳定性机理,确定了关键影响因素,并给出了优化方向;其次,建立了加速度计分辨率模型,给出了测试方法和后续优化方向;最后,通过试验确定了噪声水平,根据关键影响因素给出了优化方向。通过上述研究的开展,为石英挠性加速度计在重力测量领域中的应用奠定了基础。 相似文献
14.
激光加工技术在工业生产中的应用 总被引:2,自引:0,他引:2
激光加工技术在工业生产中的应用愈来愈广泛,激光切割和激光表面淬火的研究和应用也很广泛,根据这两项较成熟的技术提出激光加热切削,进而改变材料的切削加工性。 相似文献
15.
两种切割方法的TC1板材拉伸性能研究 总被引:2,自引:2,他引:0
为了研究激光切割和机械加工两种方法在钣金件切边中对工件的影响,采用激光切割和机械加工两种方法制作拉伸试件,并利用CMT6000微机控制电子万能试验机在常温条件下完成了拉伸试验.通过对试验结果的分析整理完成了两种方法的对比,结果表明:激光切割试件和机械加工试件得到的两组拉伸曲线在颈缩后有明显区别,激光切割的试件在拉伸过程中没有明显颈缩,且延伸率明显小于机械加工试件的延伸率. 相似文献
16.
17.
挠曲变形是主/子惯导在线标定的一种重要误差源,对其补偿处理具有重要意义。首先,分析了挠曲变形的概念、特点及其对主/子惯导误差方程影响;其次,将现有补偿处理方法分为3大类,分别为测量方法、机理建模方法和随机过程建模方法,并讨论了他们各自的优缺点;最后,探讨了挠曲变形补偿方法的发展方向。 相似文献
18.
《中国航空学报》2020,33(12):3564-3574
In this paper, a novel 2-DOF rotational pointing mechanism (RPM) is designed inspired by the guidelines of the graphical approach. The mechanism integrates with a fast steering mirror (FSM) for compensating pointing errors of a laser beam. The design intends to achieve an angular travel of ±10 mrad and steers a 25 mm mirror aperture. A planar flexure with beam flexures accompanied in parallel with an axial flexure build-up mechanism configuration. Compliant mechanism-based RPM ensures high precision and compactness. Compliance characteristics are established based on the stiffness matrix method for four different planar flexure layouts. One layout with best in-plane rotational compliance is then assessed for performance sensitivity to mechanism dimension parameters and parasitic error, thus informing the design space. Rotational stiffness in both the in-plane rotational axes and stress is determined based on finite element analysis (FEA). The wire electrical discharge machining (EDM) is employed for developing the proof of concept for the RPM and is then assembled in FSM. Experiments are conducted to determine the rotational stiffness and angular travel about both in-plane rotational axes. Comparison among theoretical, numerical and experiments reveal excellent linearity of rotational stiffness along the rotational travel range. The maximum theoretical error is less than 5.5% compared with FEA while, the experimental error has a mean of 5% and 3% for both rotational axes thus satisfying the intended design requirement. 相似文献
19.
激光二维切割工艺的优化 总被引:1,自引:0,他引:1
主要阐述了如何选取合适的激光二维切割加工工艺参数,如:激光器工作气体、激光器功率大小、光斑模式情况、辅助气体、激光焦点离工件的距离、加工板材性质及厚度、二维CAD/CAM控制系统等,以便达到最佳的切割质量及最少的气体消耗。 相似文献
20.
Q-Flex quartz flexure suspension technology has evolved to produce a world class accelerometer with thousands of units delivered in 1991. The Sundstrand Model QA3000 Q-Flex design achieves a new level of inertial grade performance while maintaining a competitive market price. The specification for the QA3000, supported by actual performance data, depicts performance characteristics superior in both bias and scale factor. Long term measurements display bias and scale factor repeatability obtained across temperature over a period of three years. These data exhibit improved thermal behavior with reduced errors. Reaction time and radiation data highlight the performance of the hybrid position detector circuit 相似文献