火花放电合成射流与超声速来流相互干扰特性数值模拟研究

为了指导火花放电式合成射流激励器在超声速流动控制中的应用,数值模拟研究了火花放电合成射流与超声速来流的相互干扰特性。研究表明火花放电式合成射流在超声速流场中产生强烈扰动,产生较强的激波结构;随着射流的喷出,激励器上游分离区和流场中激波呈先增强后减弱的趋势,激波由弓形激波逐渐弱化为斜激波,并且随着放电能量的增加射流与主流的动量通量比不断增大,射流的干扰和控制能力显著增强。由于超声速流的较大惯性及其对腔内气体的引射作用,激励器的腔体回填速率大幅下降、回填时间明显增长,使得激励器的工作频率受到很大限制。     

电弧放电等离子体激励控制超声速压气机叶栅激波/边界层干扰仿真研究

为研究电弧放电等离子体激励对超声速压气机叶栅激波/边界层干扰的控制作用,建立了模拟等离子体激励作用效果的唯象学模型,进一步以ARL-SL19超声速叶栅为对象,通过数值仿真研究了电弧放电等离子体与叶栅通道内部流动的相互作用及其对叶栅流动损失的影响。结果表明:等离子体唯象学模型能够较好模拟电弧放电等离子体诱导产生冲击波的气动特性。电弧放电等离子体激励对叶栅通道内部流动主要具有三种作用效果:在放电区,注入的热量会产生阻塞效应,增加近壁面气流的流动损失;在激波/边界层相互作用区,能够改变激波系结构,减小激波损失;在尾迹区,冲击波会诱导产生脱落涡。     

Characteristics of High Speed Electro-thermal Jet Activated by Pulsed DC Discharge

Experimental study of synthetic jet produced by pulsed direct current(DC) discharge is presented.High velocity jet is activated electro-thermally by high frequency pulsed DC discharge in small cavity.A cavity of 2.38 mm diameter cylinder bounded by circular electrode is made in a ceramic plate and a small orifice of 1.78 mm diameter is drilled in the middle of cavity.High frequency pulsed DC discharge instantaneously heats air in the cavity and produces high velocity jet at the exit of the orifice.Schlieren imaging at high framing rate of 100 kHz reveals the presence of supersonic precursor shock followed by the jet emerging from the orifice.The jet velocity reaches as high as about 300 m/s.Jet with smaller cavity volume produces lesser effect and jet velocity reaches maximum at certain cavity volume with given discharge current and orifice size.As duty time of pulse increases from 5 to 20 μs at fixed frequency of 5 kHz,the jet velocity also increases and becomes nearly constant with further increase in duty time.At fixed duty time of 20 μs,higher frequency pulsing of 10 kHz produces degradation of the jet as the discharge pulse continues.The jet developed in this study is demonstrated to be strong enough to penetrate deep into supersonic boundary layer and to produce a bow shock when the jet is issued into Mach 3 supersonic flow.     

等离子体气动激励控制超声速边界层分离的实验研究

等离子体气动激励与超声速气流相互作用已成为高速流动控制领域的研究热点。激波与边界层相互作用现象广泛存在于超声速飞行器之中。本文进行了等离子体气动激励控制压缩角区和激波诱导边界层分离的实验,通过流场纹影显示和壁面静压测量,研究等离子体气动激励如何影响激波、激波如何影响边界层特性的科学问题。实验结果表明:施加毫秒量级表面电弧放电能够前移压缩角区的诱导斜激波,使分离区后移,分离区域增加,但激波强度减弱,流场总压增加;施加微秒量级表面电弧放电能够抑制激波诱导边界层分离,使分离区减小,流场总压减小。基于实验结果,认为毫秒量级表面电弧放电激励控制超声速气流的主要机理为放电过程的焦耳热效应;微秒量级表面电弧放电激励控制超声速气流的主要机理为焦耳热效应和冲击波效应共同作用。     

顶部间隙对超声速膨胀器流动特性的影响

隔板与机匣之间留有间隙,间隙的存在势必会对超声速膨胀器的内部流场和总体性能产生影响,为了获得超声速膨胀器内部间隙流动的流动细节,采用三维雷诺平均Navier-Stokes方程和标准k-ε湍流模型,就顶部间隙对超声速膨胀器流动特性的影响进行了数值研究。结果表明:膨胀流道出口斜激波导致吸力面压力高于压力面,隔板尾缘附近部分泄漏流体经间隙流回压力面侧;间隙的存在导致吸力面进口及中、后部近下端壁压力上升,而压力面前缘附近压力下降,对比同一隔板位置,间隙高度每增加1%喉部高度,超声速膨胀器隔板载荷系数最高下降2.6%;端壁损失和斜激波损失降低,但产生了泄漏损失,三维流道内总的流动损失增加,膨胀器效率降低,本文研究范围内效率最多下降8.8%;马蹄涡、泄漏涡及二者之间的相互作用是顶部区域的主要涡系结构;前缘附近气流经间隙流到吸力面侧和尾缘附近泄漏流体越过间隙重新流回压力面侧是间隙内气流的主要运动形式。     

超声速非平衡电离磁流体流动控制试验和数值模拟

为了开展磁流体(MHD)流动控制原理研究,建立了磁流体技术试验系统,采用电容耦合射频-直流组合放电对Ma=3.5气流进行电离,在磁场作用下产生顺/逆气流方向的洛伦兹力控制流场,采用试验段静压变化来监测磁流体流动控制效果,通过一维模型计算磁流体流动控制过程中流场变化情况,分析磁流体流动控制效果;通过添加电磁源项的Navier-Stokes方程耦合电势泊松方程建立了二维磁流体动力模型,对磁流体流动控制进行数值模拟研究。主要结论如下:在磁场约束下,电容耦合射频-直流组合放电能够在Ma=3.5流场中产生大体积均匀电流,电导率约0.015S/m;在焦耳热和洛伦兹力作用下,磁流体加速时静压升高了130Pa,减速时静压升高了200Pa;磁流体流动控制过程中,仅有不足10%的能量在磁流体通道内发生了作用;数值模拟结果显示,在试验条件下,加速时静压升高了128Pa,减速时静压升高了208Pa,与试验结果基本吻合。     

脉冲能量沉积对超声速射流/激波相互作用掺混的控制研究

为探究超声速射流掺混增强的有效控制方法,基于二维非稳态雷诺平均Navier-Stokes方程,研究了脉冲能量沉积对超声速射流与斜激波相互作用后增强掺混的控制机理和规律。宽度为5 mm的低密度平面射流同向完全膨胀射入马赫数为2.5的主流中,并与20°压缩斜面所产生的斜激波相互作用。在流场中引入脉冲能量沉积对射流掺混进行控制,并考虑射流马赫数、射流长度、能量沉积位置及激励频率对掺混效果的影响。对比激励流场与基础流场,结果表明:脉冲能量沉积的加入诱导射流形成大尺度涡结构,显著提高射流的掺混效果;能量沉积位置对于不同马赫数射流的掺混增强具有不同的控制效果;激励前后射流宽度的对比表明,脉冲能量沉积的无量纲激励频率在0.22附近时,可使得射流的掺混效果最佳。     

等离子体气动激励控制激波的实验研究

在机械式和气动式激波控制方法的基础上,提出了激波控制的等离子体气动激励方法。采用电弧放电等离子体气动激励方式,设计了电弧放电等离子体气动激励器,在小型暂冲式超声速风洞中开展了等离子体气动激励控制尖劈斜激波的实验研究。结果表明,等离子体气动激励能够有效控制激波。实验研究了磁场对激波控制效果的影响,结果表明施加磁场使得激波控制效果显著增强。从热效应机理角度出发,建立了等离子体气动激励控制激波的热阻塞模型,采用该理论模型预测的激波变化规律与实验结果一致,从而验证了热阻塞模型的合理性。由于等离子体气动激励方法具有响应迅速、控制灵活等优点,因此将成为激波控制领域一条新的有价值的技术途径。     

超声速磁流体加速实验及一维模型分析

为了获得负载系数、电导率等参数变化对超声速磁流体加速效果的影响规律,利用激波风洞,采用氩气与碳酸钾作为工质,电容提供电能的方式,在磁感应强度为0.5T的条件下,进行了不同电容充电电压下的超声速磁流体加速实验研究,并对一维定常理想分段法拉第型磁流体加速模型进行了分析.通过实验获得了不同电容充电电压下#10电极间的电压、电流、负载系数、电导率及#20电极开路电压等数据,在300, 400V电容充电电压下,气流速度分别增加11.4%和24.0%,在500V电容充电电压下气流速度减小11.1%.实验及模型分析得出不同的负载系数会使超声速磁流体处于加速或减速的不同状态,而电导率会影响注入总能量的大小,使磁流体流动的速度梯度大小发生改变.      

Investigation of MHD power generation with supersonic non-equilibrium RF discharge

Magnetohydrodynamic (MHD) power generation with supersonic non-equilibrium plasma is demonstrated. Capacitively coupled radio frequency (RF) discharge (6 MHz, maximum continual power output of 200 W) was adopted to ionize the Mach number 3.5 (650 m/s), 0.023 kg/m3 airflow. In a MHD channel of 16 mm × 10 mm × 20 mm, MHD open voltage of 10 V is realized in the magnetic field of 1.25 T, and power of 0.12 mW is extracted steadily and con-tinuously in the magnetic field of 1 T. The reasons for limited power generation are proposed as:low conductivity of RF discharge; large touch resistance between MHD electrode and plasma;strong current eddies due to flow boundary layer. In addition, the cathode voltage fall is too low to have obvious effects on MHD power generation.     

Reflection of a moving shock wave over an oblique shock wave

The reflection of a moving shock wave over a wedge immersed in a still gas and the reflection of a wedge induced steady shock wave over symmetrical and asymmetrical reflecting surfaces have received intensive considerations since more than 70 years ago. Here we consider a different shock reflection problem—reflection of a moving shock wave over an initially steady oblique shock wave induced by a wedge immersed in supersonic flow. For the flow condition we considered, five moving triple points, with each connecting an incident shock wave, a reflected shock wave and a Mach stem, are identified. By using the reference frame co-moving with each triple point, the type of each shock wave of this triple point is clarified. The present study is significant in that it treats a new shock reflection problem leading to a new shock reflection configuration and showing potential applications in supersonic flow with unsteady shock interaction.     

Experimental investigation of expansion effect on shock wave boundary layer interaction near a compression ramp

The experiment is conducted to investigate the effect of expansion on the shock wave boundary layer interaction near a compression ramp. The small-angle expansion with an angle degree of 5° occurs at different positions in front of the compression ramp. The particle image velocimetry and flow visualization technology show the flow structures, velocity field, and velocity fluctuation near the compression ramp. The mean pressure distribution, pressure fluctuation, and power spectral density are me...     

超声速气流中纳秒脉冲放电特性实验研究

产生超声速导电流体是开展磁流体（MHD）动力技术实验研究的前提,低温超声速条件下产生大体积均匀等离子体有效可行的方法之一是纳秒脉冲介质阻挡放电。介绍了基于马赫数为3吸气式双喉道风洞的超声速纳秒脉冲介质阻挡放电实验系统的基本组成、设计原理和运行情况,分别在静止和马赫数为3超声速条件下对气体电离,测量分析电压和电流波形。得到以下结论：风洞稳定工作时间约为16 s,满足超声速气体放电实验的可靠进行和数据的有效采集;实验条件下,纳秒脉冲介质阻挡放电气体击穿与电场强度值有关,而与电场强度变化率无关;实验条件下,着火电压大小受超声速气流密度波动影响显著,而受气流速度影响较小。另外,气体击穿后的放电状态受超声速气流影响小;气体击穿时刻的电流峰值受着火电压和实验环境中随机自由电子数共同影响。     

Trailing-edge shock loss control with self-sustaining synthetic jet in a supersonic compressor cascade

To effectively reduce the loss of strong shock wave at the trailing edge of the supersonic cascade under high backpressure, a shock wave control method based on self-sustaining synthetic jet was proposed. The self-sustaining synthetic jet was applied on the pressure side of the blade with the blow slot and the bleed slot arranged upstream and downstream of the trailing-edge shock,respectively. The flow control mechanism and effects of parameters were investigated by numerical simulation. The res...     

直通道和弯曲通道中超声速气膜冷却研究

对直通道和弯曲通道两种不同几何形状中的二维平行缝槽形式的超声速气膜冷却进行了数值模拟,分析了在有、无斜激波入射冷却层时的冷却效果.计算结果表明,斜激波的入射使壁面的冷却效率较无斜激波入射时要低.在该计算模型中,无斜激波入射时,弯曲通道壁面的冷却效果好于直通道壁面,而有斜激波入射时,弯曲通道壁面的冷却效果不如直通道壁面.      

双楔面诱导的斜爆轰波阵面的磁流体控制

基于高超声速飞行器爆轰推进发展需要,数值研究了由双楔面诱导的斜爆轰波类型及其磁流体(MHD)控制的可行性,探讨了后楔倾角变化对双楔斜爆轰流场与MHD控制的影响.结果表明:对于前、后楔倾角分别为15°与20°的双楔面诱导的斜爆轰,Lorentz力可以将不同来流马赫数条件下的稳定斜爆轰波阵面恢复到设计位置,并可以使不稳定斜爆轰波趋于稳定,但是,无法将不稳定斜爆轰波恢复到设计位置.而当后楔倾角稍微增加时,若爆轰流场稳定,同样可对斜爆轰波阵面进行有效控制.但当后楔倾角大于25°时,稳定斜爆轰波流场失稳,此时MHD无法控制流场稳定性.但若增加气体反应速率,虽然斜爆轰波不稳定,MHD控制却可使其趋于稳定,但无法将爆轰波阵面恢复到设计位置.      

流向涡与斜激波相互作用的试验研究和数值模拟

为研究流向涡与斜激波相互作用在超声速燃烧中的应用,进行了由翼产生的流向涡与楔块产生的二维斜激波相互作用的燃烧室冷流试验研究.在不同激波强度下,纹影仪捕捉到了强、中、弱不同的涡/波作用现象.仿真与试验结果符合得较好.试验结果表明:对马赫数为2.3流场,在翼攻角10°时,能产生强流向涡,此工况下,锲角越大,涡/波作用越强.仿真结果表明:马赫数对涡/波作用影响较大,总压影响不明显,总温可影响亚声速回流区的尺寸.      

A self-similar solution of a curved shock wave and its time-dependent force variation for a starting flat plate airfoil in supersonic flow

The problem of aeroelasticity and maneuvering of command surface and gust wing interaction involves a starting flow period which can be seen as the flow of an airfoil attaining suddenly an angle of attack. In the linear or nonlinear case, compressive Mach or shock waves are generated on the windward side and expansive Mach or rarefaction waves are generated on the leeward side. On each side, these waves are composed of an oblique steady state wave, a vertically-moving one-dimensional unsteady wave, and a secondary wave resulting from the interaction between the steady and unsteady ones. An analytical solution in the secondary wave has been obtained by Heaslet and Lomax in the linear case, and this linear solution has been borrowed to give an approximate solution by Bai and Wu for the nonlinear case. The structure of the secondary shock wave and the appearance of various force stages are two issues not yet considered in previous studies and has been studied in the present paper. A self-similar solution is obtained for the secondary shock wave, and the reason to have an initial force plateau as observed numerically is identified. Moreover, six theoretical characteristic time scales for pressure load variation are determined which explain the slope changes of the time-dependent force curve.     

激光等离子体点源减阻技术中入射能量对气动阻力的影响

数值模拟了来流马赫数为5时的圆球绕流冷流场,以及来流与头部驻点附近注入激光能量而产生的等离子体相互耦合形成的流场的演化过程。计算结果表明:施加局部能量点源能够改变原有的弓形激波结构,使其变为斜激波,从而减小气动阻力;气动阻力随入射激光能量的增大而逐渐减小,当入射激光能量为1.1 J时,气动阻力减小的百分比高达40%。     

超声速光学头罩流场的PIV研究

在马赫数Ma-3．8超声速风洞中,采用PIV（Particle Image Velocimetry,粒子图像测速）技术测量了超声速光学头罩流场的速度分布。PIV技术应用于超声速流场时,对系统的硬件配备、示踪粒子的跟随性以及PIV算法的精度有很高的要求。本文PIV系统选用高精度的同步控制器和高能量激光器;以纳米级粒径的粒子作为示踪粒子,通过斜激波响应实验分析了其在超声速流场中的跟随性;并采用多种高精度速度场算法对粒子图像进行处理。实验结果表明,示踪粒子在超声速流场中有很好的跟随性,采用的高精度速度场算法能够很好地反映超声速光学头罩流场的速度分布。