Proactive optimization of transmission power and 3D trajectory in UAV-assisted relay systems with mobile ground users

In this paper, an Unmanned Aerial Vehicle (UAV)-assisted relay communication system is studied, where a UAV is served as a flying relay to maintain a communication link between a mobile source node and a remote destination node. Specifically, an average outage probability minimization problem is formulated firstly, with the constraints on the transmission power of the source node, the maximum energy consumption budget, the transmission power, the speed and acceleration of the flying UAV relay. Next, the closed-form of outage probability is derived, under the hybrid line-of-sight and non-line-of-sight probability channel model. To deal with the formulated nonconvex optimization, a long-term proactive optimization mechanism is developed. In particular, firstly, an approximation for line-of-sight probability and a reformulation of the primal problem are given, respectively. Then, the reformulated problem is transformed into two subproblems: one is the transmission power optimization with given UAV’s trajectory and the other is the trajectory optimization with given transmission power allocation. Next, two subproblems are tackled via tailoring primal–dual subgradient method and successive convex approximation, respectively. Furthermore, a proactive optimization algorithm is proposed to jointly optimize the transmission power allocation and the three-dimensional trajectory. Finally, simulation results demonstrate the performance of the proposed algorithm under various parameter configurations.     

Method of energy efficiency assessment for power supply of autonomous drive systems for perspective mobile objects

Based on an integrated approach, we solve the optimization problem for energy content and weight-dimensional characteristics of the electric servo drive by synthesis of structure and analysis of characteristics for different power supplies. The generalized power supply model, developed for different power supply of drive control systems, is given.     

Management of transponder resources in mobile satellite systems

Allocation of L-band spectrum for land mobile satellite (MSAT) services in Mobile-WARC-87 paves the way for the introduction of such services in the early 1990s. An overview of the proposed network architecture of the Canadian MSAT network is presented. Management of transponder resources, i.e. power, bandwidth, and spot-beam antennas, which poses a set of unique and significant problems in the design and operation of MSAT networks, is addressed. The three-level hierarchical approach used by the Canadian network is described, and the technical requirements for solving the above problems are identified. The two upper levels employ reconfigurable fixed assignment for allocating transponders to antenna spot beams, and transponder power and bandwidth to different services. The lowest level employs demand assignment and packet multiple access protocols for resource sharing among different subscribers. Uncoupling the resource management problems into manageable portions reduces the complexity and enhances the robustness of the network     

Issues in microwave power systems engineering

The key issues in microwave power system engineering are beam safety, frequency allocation, and affordability. These major issues are presented, discussed, and suggestions for resolving them are offered. The issue of beam safety can be captured in the phrase “Fear of Frying.” Can a properly engineered beamed power safety system allay the public perception of microwave radiation dangers? Openness, visibility, and education may be keys to resolving this issue satisfactorily. “Not in my Spectrum” is a phrase that is frequently encountered in connection with the issue of where can the microwave power beam frequency be located. International cooperation may provide a part of the solution to this issue. “Wow, that much!” is a phrase encountered when dealing with the issue of economic affordability of large beamed power systems. A phased engineering approach for multiple uses even during construction is presented to aid in garnering revenue during the system build phase. Also, dual mode DC-RF converters are encouraged for bi-directional power flow utility and economies of scale in production     

Modeling and simulation of spacecraft power systems

Modeling of a complete spacecraft power processing system is presented, using the Boeing EASYS software. Component models are developed, and several system models including a solar array switching system, a partially shunted solar system, and cosmic background explorer (COBE) system are simulated. The modes of operation of the power system, such as shunt mode, battery-charge mode, and battery-discharge mode, are simulated for a complete orbit cycle     

Assessment of safety in space power wiring systems

Wiring system failures have resulted from arc propagation in the wiring harnesses of many aircraft and space vehicles. These failures occur when the insulation becomes conductive upon the initiation of an arc. In some cases, the conductive path of the carbon arc track displays a high enough resistance such that the current is limited, and therefore may be difficult to detect using conventional circuit protection. Often, such wiring failures are not simply the result of insulation failure but are due to a combination of wiring system factors. Inadequate circuit protection, unreliable system designs, and careless maintenance procedures can contribute to a wiring system failure. This paper approaches the problem with respect to the overall wiring system, in order to determine what steps can be taken to improve the reliability, maintainability, and safety of space power systems. Power system technologies, system designs, and maintenance procedures which have contributed to past wiring system failures are discussed. New technologies, design processes, and management techniques which may lead to improved wiring system safety are introduced     

Geomagnetic induction effects in ground-based systems

Plasma physics processes, whose ultimate origin is the Sun, exist in the Earth's magnetosphere and ionosphere and can produce effects which are detrimental to the operation of technological systems associated with long conductors deployed on the Earth's surface. Geomagnetic fluctuations produced by such plasma processes can cause disturbances and disruptions in cable communication systems, electrical power distribution systems, and long pipelines. This paper briefly addresses these three topics with illustrative examples of some measured effects from each topic area.     

Global behavior of the equatorial anomaly since 1999 and effects on GPS signals

Tools to generate VTEC maps were developed. These maps have been used to study the global behavior of the equatorial anomaly since 1999 up to now, and its effects on GPS signal. The VTEC data for any place around the world is based on IONEX data. In this way, a quick annual behavior of the VTEC may be analyzed, and also compared to the VTEC behavior for different places and different years. Based on these data an electron density model taking into account radial as well latitudinal and longitudinal gradients were developed. This model was incorporated in a 3D ray-tracing program. Using this program it was possible to compare the STEC conversion to the VTEC. As expected the results show that the lower the elevation angles of the Satellite Vehicle, the greater the error in the VTEC estimation.     

Design and testing of spacecraft power systems using VTB

A study is presented on the design and testing of spacecraft power systems using the virtual test bed (VTB). The interdisciplinary components such as solar array and battery systems were first modeled in native VTB format and validated by experiment data. The shunt regulator and battery charge controller were designed in Simulink according to the system requirements and imported to VTB. Two spacecraft power systems were then designed and tested together with the control systems.     

Large eddy simulation of turbulent combustion processes in propulsion and power systems

Progress toward application of the large eddy simulation (LES) technique to turbulent multiphase combustion processes is presented with emphasis placed on propulsion and power systems. The primary objective is to provide a systematic analysis of the current state-of-the-art and assist in the development of technical performance metrics for model development and validation. Research is currently required to provide both improved multiphase combustion models and improved datasets for validation. Requirements for further model development must be established through detailed analyses of the space–time characteristics of small-scale flame structures and turbulence–chemistry interactions. Concurrently, a refined set of implementation requirements must be established. Steps taken towards these goals are described by first providing a generalized formulation of the filtered conservation equations using an arbitrary filter function that operates on both spatial and temporal scales, with no a priori assumptions made regarding the character of the multiphase fluid elements present in the system. The distinct requirements for LES are listed with a discussion that highlights current progress and unresolved issues. Two case studies are then presented that demonstrate the predictive capabilities of LES when implemented with the appropriate numerics and grid resolution, under highly controlled conditions, and with well-defined boundary conditions. The paper is concluded by highlighting recent findings associated with the International Workshop on Measurement and Computation of Turbulent Nonpremixed Flames.     

Impacts of solar and auroral storms on power line systems

A sensitive search for pulsars inside a sample of gamma-ray source error boxes has been carried out using the Arecibo and Parkes radiotelescopes. The paper describes the motivation of this search and the characteristics of the experiments used. As a preliminary result, new pulsars have been discovered and some of them are possibly candidates to be the counterparts of the gamma-ray sources.     

Space power systems requirements and issues: the next decade

Some of the more important space power technology issues, requirements, and challenges of the 1990s are described, and the impact of new component technology on the overall performance of space power systems is assessed. Advanced component, subsystem and system technologies that will significantly affect the performance, reliability, and survivability of next-generation baseload and burst mode space power systems are emphasized. Technology disciplines related to power sources (solar/nuclear and chemical), power conversion, energy storage, power conditioning/distribution and control, and waste-heat acquisition, transport, and rejection are primarily addressed. For some of them, performance trends that can be used as the basis for projecting future advanced power-system performance are developed. Performance capabilities for several different types of space power system for both baseload and burst mode applications are postulated on the basis of evolving technology and point designs that incorporate projections of advanced component capabilities     

Parametric cost model for solar space power and DIPS systems

A detailed cost model has been developed to parametrically determine the program development and production cost of photovoltaic, solar dynamic, and dynamic isotope (DIPS) space power systems. The model is applicable in the net electrical power range of 3 to 300 kWe for solar power and 0.5 to 10 kWe for DIPS. Application of the cost model allows spacecraft or space-based power system architecture and design trade studies or budgetary forecasting and cost benefit analyses. The cost model considers all major power subsystems (i.e., power generation, power conversion, energy storage, thermal management, and power management/distribution/control). It also considers system cost effects such as integration, testing, and management. The cost breakdown structure, model assumptions, ground rules, bases, cost estimation relationship format, and rationale are presented, and the application of the cost model to 100-kWe solar space power plants and to a 1.0-kWe DIPS is demonstrated     

分布式电推进飞机动力系统评估优化方法

以电推进飞机的动力系统作为研究对象,开展了以下研究工作：采用电力系统潮流计算方法,分析了采用高压直流供电体制的分布式电推进飞机电气系统,模拟了其在稳定运行状态与断路故障状态下的能量流动关系,同时分析了直流电压等级对电气系统的影响。搭建了完整的分布式电推进飞机动力系统仿真模型,依据基于时间和基于高度的飞行剖面,对比分析了纯电推进与涡轮电推进架构在推进功率、推进效率与航程3个评价指标上的优劣。建立了动力系统典型部件的参数化模型,并使用符号规划算法对建立的参数化模型进行了优化计算,比较了传统涡轮推进与涡轮电推进架构下动力系统质量与燃油消耗率间的优化权衡关系。研究结果为分布式电推进飞机混合动力系统的设计提供了有价值的正向设计方法。     

Best practices for model-based and simulation-aided engineering of power transmission and motion control systems

This paper deals with the modelling and simulation of aircraft systems, in particular for power transmission and control. It is intended to review, propose and disseminate best practices for making model-based/simulation-aided engineering more efficient at any phase of the system life cycle. The proposals are aimed at creating value, not only by increasing the performance of the product under study but also by shortening the time to market, capitalizing knowledge, mitigating risks and facilitating concurrent engineering. The needs associated with the engineering activities are firstly identified to define a set of requirements for the models. Then, these requirements are used to drive the considerations leading to model development, focusing in particular on the process, modelled physical effects, modelling level, model architecting and concurrent engineering. The third part deals with the model implementation, giving special consideration to the different types of models, causalities, parameterization, implementation and verification. Each part is illustrated by examples related to safety critical actuators.     

Failure behavior analysis of phased-mission systems considering functional and physical isolation effects

Phased-Mission Systems(PMS) are widely applied in aerospace, telecommunication and intelligent systems for multiple, consecutive and non-overlapping phases of missions. The phasedependent stresses and system structure cause some difficulties to the reliability analysis of PMSs.In this paper, we analyze the physical isolation effects on the degradation speeds and across-phase damage accumulations of failure mechanisms. And, some corresponding reliability and unreliability formulas are derived. Be...     

风洞试验中测压管路信号畸变及修正研究

采用分布摩擦模型和试验方法分析了简单测压管路系统的信号畸变,分析了数学方法和机械方法修正测试信号的优缺点;讨论了不同参数对管路系统传递函数的影响,同时说明了试验中常见管路连接、弯折、挤压对管路系统的影响,提出了合理利用管路共振效应提高测试数据信噪比的思想,并基于此提出了管路系统的选择及定量的评价准则。结果表明：采用分布摩擦模型理论修正测压管路系统脉动畸变信号是可行的;管路等内径连接、轻度弯折、轻度挤压不会对管路的传递函数造成影响;通过笔者提出的定量评价标准可以高效的选取合理的管路长度。