SiCp含量及缓蚀剂对SiCp／Al金属基复合材料腐蚀行为的影响

研究了ZL101A铝合金及以其为基体含5vol%,10vol%,15vol%和20voll%SiCP的SiCP/Al金属基复合材料在3.5%NaCl溶液中的腐蚀行为,通过添加钼酸钠、硅酸钠等缓蚀剂在3.5%NaCl溶液中,将SiCP/Al金属基复合材料在室温下浸泡一定的周期,采用失重法和SEM技术分别计算腐蚀速率和分析腐蚀后的微观组织形貌.试验结果表明SiCP颗粒增强物的加入对SiCP/Al金属基复合材料腐蚀速率影响不大,甚至略有降低,SiCP改变了铝合金基体表面腐蚀的形核和发展,点蚀数量增加、深度变浅.添加缓蚀剂后,抑制了SiCP/Al金属基复合材料表面点蚀的形成,与钼酸钠缓蚀剂相比,硅酸钠具有良好的缓蚀作用,当SiCP颗粒增强物的含量达到15vol%和20vol%时,缓蚀剂的缓蚀效果明显下降.     

热压工艺对SiO2f／SiO2复合材料结构与力学性能的影响

采用真空热压烧结工艺制备了SiO     

纤维分布对Gr/Al复合材料显微组织和弯曲性能的影响

利用真空压力浸渗法制备了石墨纤维增强的铝基复合材料（Gr／ZL101A），研究了不同的纤维分布状态（SiC颗粒混杂纤维与未混杂的纤维）对复合材料显微组织及弯曲性能的影响。结果表明，SiC颗粒混杂不仅改善了纤维分布均匀性，而且弯曲性能也有明显提高。     

Effect of powder feeding rate and size on critical velocity and mechanical properties of cold sprayed Al2O3/2024 deposit

The particle acceleration behavior and deposition mechanism of cold spraying aluminum matrix composites(Al2O3/2024)are complicated by the addition of ceramic particles.The effects of different feeding rates and particle diameters on critical velocity and mechanical properties were studied by numerical simulation and experiment.The results indicate that as the powder feeding rate increases,the impact velocity of gas and particles gradually decreases,and the temperature of gas and particles increases,resulting in an increase in the difference between particle impact velocity and critical velocity.The highest tensile strength of the deposit is achieved at a powder feed-ing rate of 1 r/min,which is 343 MPa.As the powder feeding rate increases,the performance of the deposits decreases,but it significantly saves time and cost.As the particle diameter increases,the impact temperature first increases and then decreases,resulting in the critical velocity first decreas-ing and then increasing,and the mechanical performance first increasing and then decreasing.To some extent,the best performance of the deposit is achieved when the size of the metal particle is close to that of the ceramic particle.